836 Troy-Bilt Lawn Mower - Overview

This authentic replacement blade is manufactured for use with Craftsman walk-behind lawnmowers and is designed to deliver clean, efficient cuts. Measuring 21 inches in length, the blade features an angled design that promotes optimal airflow, allowing grass clippings to circulate through the cutting deck for effective side discharge and m...Read moreulching. Over time, mower blades can dull or wear down, leading to torn grass blades and a less polished lawn appearance. Replacing a worn blade with this high-quality part ensures a sharper, cleaner cut that keeps your lawn looking its best. This blade is sold individually.

This nut is a manufacturer-approved replacement part for various lawn and garden equipment. It is sold individually, not as part of a kit or assembly. Also referred to as a Lock Nut, it is resistant to loosening when threaded on a bolt. It has a variety of applications and is used in multiple locations on most models. Please refer to your...Read more owners manual to determine the exact location. While made of durable metal, the ends can round off from improper use of a wrench or socket. Depending on the location, this part may also become worn through regular use of your machine. It should be replaced when visibly cracked, worn or damaged. To complete this repair, you will need a wrench or socket, and a torque wrench. Ensure you torque the bolt according to the manufacturer recommendations. Customers rate this repair as Easy.

This is a genuine Troy-Bilt replacement wheel kit specially designed for walk-behind lawn mowers. This is the wheel that supports and helps to move your mower around. This wheel assembly consists of a plastic rim and a rubber tire. This wheel kit includes a plastic wheel with a tire, a metal gear and a plastic hub cap. To replace this ...Read morewheel you would need a wrench. • Remove the hub cap and the locknut • Replace the old wheel with the new one • Secure it with a nut and a hub cap

This hinge pin is an OEM part that is designed to hold the chute to the bracket of your lawn mower, allowing the shute to move upward and downward. It is silver, made of metal, and it is around 5 inches in length. Over time, the hinge pin may break, and it will no longer be able to support the chute or allow it to move. If this occurs, ...Read moreyou will need a pair of needle nose pliers to complete this simple repair, which most of our customers told us was easy. Look for the hinge pin on the chute door and the mounting bracket of your mower deck.

This replacement drive cable is an authentic component which is supplied directly from the original equipment manufacturer for use with walk-behind lawn mowers. It is an identical replacement for a missing or damaged 45" control cable that was originally installed on a new unit, please make sure to refer to the appropriate diagrams of you...Read morer model for the correct location and application of this hardware. Keep in mind this high-quality rubber insulated part is sold individually.

This pair of keys is supplied by the equipment manufacturer for use in lawn and outdoor power equipment. The key is made of metal and designed to prevent unauthorized use or accidental starting of the equipment. It is fitted into the ignition switch, found near the operator seat or control panel. If the key is lost, damaged, corroded or w...Read moreorn down, you will not be able to engage and start the engine. These keys come in a set of two.

This is a high quality replacement v-belt that is specially designed for Troy-Bilt and Yard Man lawn mowers. It is the main drive belt of the unit which spins the blade. Clean the pulleys off before installing the new belt to ensure top performance and longevity with your new belt. Inspect belts periodically and replace them when worn to ...Read moremaintain peak performance. Please note one durable rubber v-belt is included per order.

This replacement drive cable is supplied from the original equipment manufacturer. It is commonly utilized on Troy-Bilt and Yard Man walk-behind lawn mowers. The purpose of a drive cable is to stop the engine when the user lets go of the handle. When the cable is damaged or broken, the mower becomes temporarily inoperable so the cable nee...Read moreds to be replaced. Please note one durable rubber insulated drive cable is included. Replacing this part is a pretty simple task that should only require a screwdriver and pliers.

The spur gear attaches to the wheel dust cover. It is a genuine item that is supplied by the original equipment manufacturer for use with lawn mowers made by Troy-Bilt, MTD, Yard Man, Yard Machines, and Cub Cadet. This part is made of metal and is sold individually. During the installation process, a screwdriver, a set of pliers, and a wr...Read moreench set might be needed to replace this part. It will require replacing if it becomes broken.

It is a genuine item that is supplied directly from the original equipment manufacturer for use with Troy-Bilt, Yard Machines, and Yard Man lawn mowers. This is an identical replacement for a missing or a faulty left-hand spur gear that helps to drive the wheel. Please make sure to refer to the appropriate diagrams of your specific model ...Read morefor the correct location and application of this hardware. This high-quality spur gear is made of durable metal and is sold individually, keep in mind the right-side gear is sold separately.