8350 - Parts

This OEM-verified shear bolt, measuring 2-1/8 inches in length and 5/16 inches in diameter, is designed to break under excessive force to protect your lawn equipment by absorbing the impact. Specifically, it allows the augers of your machine to stop while the shaft and gear case continue to rotate. To check if the shear bolt is broken, in...Read morespect it for fractures or missing pieces. You might notice that the shaft of your machine is rotating normally but the augers are not moving with it. It is important to address a damaged shear bolt promptly to avoid costly repairs or equipment failure. To remove the shear bolt from your machine, use a wrench or socket to turn it counterclockwise. As this replacement part is sold individually, it is strongly recommended that you keep spare bolts on hand in the event that they break.

This is an authentic item that is supplied by the original equipment manufacturer for use with Toro lawn and garden equipment. It is a standard hardware which has multiple applications depending on the model of your unit, please make sure to refer to the appropriate diagrams of your model for the correct location and application of this i...Read moretem. Keep in mind this high-quality nut is made of durable metal and is sold individually.

This is an OEM Ariens part directly sourced from the manufacturer for use in snowblowers. The seal attaches to the gear case and is made of metal. During replacement, it may require a socket set to help install this part correctly. It may become broken and will need to be replaced. This is available as an individual replacement part.

This is a genuine Ariens replacement part that has been sourced from the original manufacturer to be used with snowthrowers. The metal bushing fits into the bearing support to provide spacing between the rake shaft and the support. The bushing is sold as an individual replacement part.

This high quality replacement air filter element is an authentic OEM sourced part, it is not an aftermarket imitation. It is commonly utilized on Lawn Boy and Toro lawn mowers. Its purpose is to supply clean air free of dust and other contaminants into the carburetor. Replacing this filter is a very simple task that does not require any t...Read moreools. Simply remove the cover and replace the filter element. Please note, this foam item is sold individually.

This manufacturer-certified Grass Chute is a black plastic part used to direct grass clippings. Installation is rated as "Easy" by customers, and requires a wrench or socket. The chute secures to the top of the cutting deck. If broken due to wear/fatigue/damage you will be able to see the issue, and should replace the part. Refer to your make model and diagram to ensure this is the correct part.

This is an original Ariens replacement part manufactured for use with snowthrowers. The special feather key is used to protrude from a slot on a shaft and fit into a keyway on a gear or part assembly that fits over the shaft. The feather key joins the shaft and gear to allow unison rotation. This feather key is sold individually, please see model diagram for associative parts.

This Bearing Cone, or Cone Bearing, is used to support the helicon pinion shaft to allow it to rotate where it passes through an assembly. It is sourced directly from the manufacturer for use in snow blowers, is made of metal, is silver, is not part of a kit or assembly, and is sold individually. A grinding, growling, or squealing sound ...Read morefrom your bearing suggests that your bearing cone will need to be replaced. If you find signs of wear, fatigue, or damage on the Cone, it needs to be replaced. You will need a wrench set, a socket set, a screwdriver, and a nut driver to complete this repair. When you install the new Cone, ensure that you pack the bearing with grease before installing it. Customers rate this repair as Medium difficulty.

This is a genuine OEM sourced replacement part which is specially designed for use with Ariens lawn and garden equipment. This is a standard hardware which has multiple applications based on the model of your unit, please refer to the appropriate diagrams for the correct location and application of this item. Keep in mind this high-quality item is made of durable metal and is sold individually.

This genuine OEM lock nut is designed for use with Ariens snow blowers and throwers. It helps secure the skid shoe runner to the deck and is engineered to resist loosening when properly threaded onto a bolt, ensuring a stable and reliable connection. Made from durable metal, this high-quality part is sold individually. For safe installation, be sure to use a properly sized wrench.

This Bearing Cup is a genuine replacement part for various models of snow blowers. It is used to carry the maximum combinations of radial and thrust loads simultaneously. It is made of metal, is silver, is not part of a kit or assembly, and is sold individually. This part may make a grinding noise when it is malfunctioning. It should be...Read more replaced when it is visibly worn or damaged. It is found on the helicon shaft with the Cone Bearing and Adjustment Plug. You will need a screwdriver, pliers, a socket set, and a wrench set to complete this repair. Customers rate this repair as Medium difficulty.