8330 - Overview

The Ni Lock Nut (Nylock Nut) is a Silver, 5/16x18, individually sold metal nut. It can be adjusted and replaced using a wrench or socket and torque wrench to the manufacturer specfications, and is used to secure the sheer pin in place on the augur. These nuts are a one time use part due to their locking mechanism. You'll know the nut has...Read more broken because the augur will not spin, and this is when the part should be replaced. Customers found this to be an easy repair.

This genuine OEM lock nut is designed for use with Ariens snow blowers and throwers. It helps secure the skid shoe runner to the deck and is engineered to resist loosening when properly threaded onto a bolt, ensuring a stable and reliable connection. Made from durable metal, this high-quality part is sold individually. For safe installation, be sure to use a properly sized wrench.

This replacement bolt is sourced from original equipment manufacturer for use with Ariens snow blowers/throwers. It is a standard hardware which has multiple applications based on your unit. This bolt is designed with a square area under its head which allows the bolt to stay secure while the lock nut is tightened. It is sold individually.

This OEM part is a zerk fitting that is sometimes called a grease fitting, lube fitting, grease zerk, or Alemite fitting. It is a metal nipple that you connect a grease gun to, allowing you to lubricate the moving parts in your lawn equipment, usually on joints or bearings. This fitting is 1/4 inch wide, has 28 threads per inch, and a thr...Read moreeaded portion that is .256 inches long. If the fitting is broken, you may notice that your machine is moving sluggishly, or the fitting may appear cracked or clogged with debris. It is important to replace a damaged fitting right away, because if you do not, debris can prevent the fitting from accepting grease and the moving parts of your machine will wear out faster and eventually break down completely. To replace the fitting, you will need to use a wrench to remove it from your machine. Keep in mind that this replacement part is sold separately, so you may want to consider stocking up on fittings before you need them. Since the fittings on your machine wear out at the same rate, having a few extra on hand can save you time and hassle down the road.

This is a genuine OEM approved replacement gas cap assembly which is specially designed for use with Toro lawn mowers. It is utilized to keep the fuel in the tank, over time the material tends to deteriorate and may crack eventually requiring replacement. It is a high-quality part which is made of durable black plastic and it is sold individually.

This is a manufacturer-approved carriage bolt designed for use with Ariens snow blowers and snow throwers. Made from durable metal, this standard hardware component is suitable for a variety of applications. The bolt features a square section beneath the rounded head, which fits securely into a matching square hole in the workpiece. This ...Read moredesign prevents the bolt from turning when the nut is tightened, ensuring a secure and stable fit. Sold individually, this bolt is a reliable replacement part. For proper installation and compatibility, please refer to your equipment’s diagrams or user manual.

This is an authentic Ariens replacement part. The control cable is designed by the manufacturer for use in snowblowers and lawn tractors. This part is made of metal, and comes with the plastic tee handle. It is used to adjust the discharge chute. You may require a screwdriver when replacing this item.