833005 (000101) Gravely Lawn Tractor Accessories - Overview

This genuine OEM lock nut is designed for use with Ariens snow blowers and throwers. It helps secure the skid shoe runner to the deck and is engineered to resist loosening when properly threaded onto a bolt, ensuring a stable and reliable connection. Made from durable metal, this high-quality part is sold individually. For safe installation, be sure to use a properly sized wrench.

This replacement bolt is sourced from original equipment manufacturer for use with Ariens snow blowers/throwers. It is a standard hardware which has multiple applications based on your unit. This bolt is designed with a square area under its head which allows the bolt to stay secure while the lock nut is tightened. It is sold individually.

This OEM part is a zerk fitting that is sometimes called a grease fitting, lube fitting, grease zerk, or Alemite fitting. It is a metal nipple that you connect a grease gun to, allowing you to lubricate the moving parts in your lawn equipment, usually on joints or bearings. This fitting is 1/4 inch wide, has 28 threads per inch, and a thr...Read moreeaded portion that is .256 inches long. If the fitting is broken, you may notice that your machine is moving sluggishly, or the fitting may appear cracked or clogged with debris. It is important to replace a damaged fitting right away, because if you do not, debris can prevent the fitting from accepting grease and the moving parts of your machine will wear out faster and eventually break down completely. To replace the fitting, you will need to use a wrench to remove it from your machine. Keep in mind that this replacement part is sold separately, so you may want to consider stocking up on fittings before you need them. Since the fittings on your machine wear out at the same rate, having a few extra on hand can save you time and hassle down the road.

This is an authentic Ariens replacement part. The control cable is designed by the manufacturer for use in snowblowers and lawn tractors. This part is made of metal, and comes with the plastic tee handle. It is used to adjust the discharge chute. You may require a screwdriver when replacing this item.

This genuine OEM lock nut is designed for use with Ariens snow blowers and throwers. It plays a key role in securing the skid shoe runner to the deck, helping to maintain proper alignment and performance. The lock nut is engineered to resist loosening when properly threaded onto a bolt, ensuring a secure and lasting fit. Made from dura...Read moreble metal, this high-quality part is sold individually. For safe and effective installation, use a properly sized wrench.

Metallic screw that is less than an inch long. Does not include the plastic washer.