8313 - Parts

An authentic replacement part that is supplied directly from the original equipment manufacturer for use with Briggs and Stratton engines commonly installed on lawn and garden equipment. It is the special component which is attached to the starter rope to provide a user with a comfortable grip to pull-start the engine. This durable part is made of high-quality plastic and it is sold individually.

It is a genuine item that is supplied directly from the original equipment manufacturer for use with Ariens lawn and garden equipment. This special seal helps to provide an air-tight seal between connected pieces, please refer to the appropriate diagrams of your model for the correct location and application of this hardware. Keep in mind this durable rubber component is sold individually.

This Bearing Cone, or Cone Bearing, is used to support the helicon pinion shaft to allow it to rotate where it passes through an assembly. It is sourced directly from the manufacturer for use in snow blowers, is made of metal, is silver, is not part of a kit or assembly, and is sold individually. A grinding, growling, or squealing sound ...Read morefrom your bearing suggests that your bearing cone will need to be replaced. If you find signs of wear, fatigue, or damage on the Cone, it needs to be replaced. You will need a wrench set, a socket set, a screwdriver, and a nut driver to complete this repair. When you install the new Cone, ensure that you pack the bearing with grease before installing it. Customers rate this repair as Medium difficulty.

This Woodruff Key is used in a variety of lawn and garden equipment, its purpose is to hold a shaft with a mating part, such as a gear. It may be found in various locations on your machine, refer to your owners manual to ensure this is the correct part. It is made of metal, is gray, is not part of a kit or assembly, and is sold individual...Read morely. This part will need to be replaced when it becomes broken, damaged, or the mating shaft or gear will no longer rotate together.

This genuine OEM lock nut is designed for use with Ariens snow blowers and throwers. It helps secure the skid shoe runner to the deck and is engineered to resist loosening when properly threaded onto a bolt, ensuring a stable and reliable connection. Made from durable metal, this high-quality part is sold individually. For safe installation, be sure to use a properly sized wrench.

This Bearing Cup is a genuine replacement part for various models of snow blowers. It is used to carry the maximum combinations of radial and thrust loads simultaneously. It is made of metal, is silver, is not part of a kit or assembly, and is sold individually. This part may make a grinding noise when it is malfunctioning. It should be...Read more replaced when it is visibly worn or damaged. It is found on the helicon shaft with the Cone Bearing and Adjustment Plug. You will need a screwdriver, pliers, a socket set, and a wrench set to complete this repair. Customers rate this repair as Medium difficulty.

This replacement carburetor is designed for small engines used on lawn mowers, where it helps regulate the air-to-fuel mixture for smooth starting and dependable performance. Built to restore proper fuel delivery, it can resolve common issues such as loss of power, rough running, or poor throttle response. Designed for a precise fit and r...Read moreeliable operation, it’s an effective solution for maintaining consistent engine performance.

The spark plug is made out of metal and helps to ignite the fuel. This is an authentic part from Briggs & Stratton for use in engines. Keep in mind this high-quality item is sold individually. When replacing this part a wrench and a set of pliers may be needed. It will need to be replaced if it stops working.

This is a genuine replacement part sourced directly from the manufacturer. The screw is commonly found in Briggs & Stratton engines. This part is made of metal, and may be found in various locations in the machine, depending on model. Please be aware that there are different screws used in the machine. Refer to the parts diagram to be...Read more sure of ordering the correct part. You may require a screwdriver or wrench when replacing this item. The screw is sold as an individual replacement part.

This OEM part is a zerk fitting that is sometimes called a grease fitting, lube fitting, grease zerk, or Alemite fitting. It is a metal nipple that you connect a grease gun to, allowing you to lubricate the moving parts in your lawn equipment, usually on joints or bearings. This fitting is 1/4 inch wide, has 28 threads per inch, and a thr...Read moreeaded portion that is .256 inches long. If the fitting is broken, you may notice that your machine is moving sluggishly, or the fitting may appear cracked or clogged with debris. It is important to replace a damaged fitting right away, because if you do not, debris can prevent the fitting from accepting grease and the moving parts of your machine will wear out faster and eventually break down completely. To replace the fitting, you will need to use a wrench to remove it from your machine. Keep in mind that this replacement part is sold separately, so you may want to consider stocking up on fittings before you need them. Since the fittings on your machine wear out at the same rate, having a few extra on hand can save you time and hassle down the road.

This replacement part is used to connect the mower blade to the base of the mower deck. It is made of metal, is gold, is not part of a kit or assembly, and is sold individually. The Bearing Slinger is most often located on the spindle housing of the mower deck and needs to be replaced if it is broken, worn, or damaged. This part is know...Read moren to become worn through regular use of your machine. Customers rated this repair as Medium difficulty.