All Installation Instructions for 8273

Purchased home but stove had no broiler pan.

16 of 33 people found this instruction helpful.

Raymond from BLOOMINGTON, MN
Very Easy
Less than 15 mins

Purchased 2 piece broiler pan from this site

Was this helpful?

light bulb in water ice freezer door went bad

8 of 14 people found this instruction helpful.

Carl from RIVERSIDE, CA
Very Difficult
More than 2 hours
Screw drivers

I didn't. Don't know how to get to light bulb to change it for this specific model

Was this helpful?

Replacing the bulb in the freezer side

5 of 11 people found this instruction helpful.

Yafa (and David) from Bothell, WA
Easy
Less than 15 mins
Nutdriver

Removed the ice brucket,
Removed the light shield by releasing one screw using a nutdriver.
Replacing the bulb and reinstalled the light shield.

Your web site is one of the best and most helpfull service sites I ever used. Just wish that in the future you will ship parts overseas.

Was this helpful?

light wont come on

4 of 9 people found this instruction helpful.

James from Fort Collins, CO
A Bit Difficult
1- 2 hours
Pliers, Screw drivers, Wrench set

Well, when you put the back cover on and screw it down make sure you have nothing touching the white wire leading to the oven light. I did and it blew the push switch when I threw the 220 breaker. Actually, the light was on when I came in the room, but when I pushed the switch on the front panel it sparked in the rear and popped the break ... Read more

Read less

Was this helpful?

broiler pan missing

1 of 2 people found this instruction helpful.

RAYMOND from JACKSONVILLE, FL
Really Easy
Less than 15 mins

ordered new broiler pan

Was this helpful?

burned oven bulb

3 of 9 people found this instruction helpful.

Ivanka from Atlantra, GA
Really Easy
30 - 60 mins
Pliers, Screw drivers

The hardest part was taking out original light bulb because screws on shield where hard to unscrew after all this years . The old bulb vent out leaving neck in socket. It took narrow electrical pliers to get neck out .The generic appliance bulb did not fit and had aluminum neck ,not recommended for brass sockets in ovens.Putting new ligh ... Read more

Read less

Was this helpful?

oven light burnt out

3 of 10 people found this instruction helpful.

William from Schwenksville, PA
Easy
Less than 15 mins

1. Unscrewed glass cover on bulb
2. Removed old bulb
3. Screwed in new bulb
4. Replaced glass cover
5. Mixed drink & baked cupcakes

Was this helpful?

light bulb went out in my oven

2 of 7 people found this instruction helpful.

Janet from Ada, MI
Really Easy
Less than 15 mins

My husband took the plastic cover off and took out old bulb and screwed in the new one. Then put the cover back on.

Was this helpful?

replaced oven lightbulb

0 of 1 people found this instruction helpful.

peggy ann from forest city, NC
Really Easy
Less than 15 mins

very easy

Was this helpful?

Light burned out in upper oven

0 of 1 people found this instruction helpful.

Shirley from Las Vegas, NV
Really Easy
Less than 15 mins

Screwed in light bulb and glass protector

Was this helpful?

Bulb Replacement

0 of 2 people found this instruction helpful.

Judith from Phoenix, AZ
Really Easy
Less than 15 mins

I pulled down the wire around the glass cover. . . Released on end of the wire from its holder being careful to not let the glass cover drop. Unscrewed the bulb and replaced with replacement. Easy, easy.

Was this helpful?

Screws on the door of the dishwasher were very loose.

1 of 6 people found this instruction helpful.

Kathryn from Carol Stream, IL
Really Easy
Less than 15 mins
Screw drivers

Went to PartsSelect. Put in Dishwasher model number. Chose the screws for that model number. Ordered the screws. Can't get any easier than that!

Was this helpful?

Light bulb failure

Grant from Alexandria, VA
Really Easy
Less than 15 mins

Received the part the day after ordering. Appreciated the quick service and repair took less than a minute.

Was this helpful?

8273 - Instructions