81590-1 General Electric Freezer - Parts

This light bulb is a 40 watt, 130-volt clear appliance light bulb that is manufactured to fit microwaves with small-base light bulb sockets. The light bulb illuminates the inside of the microwave while the microwave is running. You may need to replace this part if the existing one is burnt-out or broken. If the existing light bulb is brok...Read moreen, disconnect power to the microwave and remove the bulb base with a pair of needle nose pliers. This is a common wear item, so it is recommended to order a spare. These light bulbs are sold individually.

The run capacitor helps the compressor kick on and off while maintaining a constant temperature in your fridge and freezer. You may need to replace your run capacitor if your refrigerator or freezer section will not start, if they are too warm, or if your refrigerator has become too noisy. Replacing the run capacitor is a relatively easy ...Read moreproject. For this repair you will only need a 1/4 inch nut driver and needle nose pliers. Remember to disconnect the power and water supply line to the unit before you begin this repair. For full step by step instructions, simply click on the video below.

Discover the pure genuineness and outstanding quality of the Frigidaire White Door Gasket. This essential OEM part works flawlessly with certain models of Frigidaire appliances, ensuring an excellent harmony with your equipment. As a reliable lid gasket, it provides an efficient seal around your freezer lid, preventing warm air from intru...Read moreding into your freezer, maintaining the necessary cold environment inside. It's notable that the size and shape of this item may slightly vary, yet each piece delivers optimal functionality. For effective installation, smooth the folds and creases in the gasket by soaking it in warm water, or gently warming with a hair dryer on low heat. When repairing, ensure safe storage of any perishable food to avoid deterioration.

This is a plastic OEM drain plug that is attached to the drain system of your appliance and is compatible with several different makes and models of refrigerators, freezers, and air conditioners. This drain plug is used to prevent water from leaking out of the incorrect drain system within the appliance and is normally removed for cleanin...Read moreg and maintenance. If you notice water leaking inside of your appliance, the plug may be improperly positioned or may need replacing. To replace, simply pull off the damaged plug and insert the new plug in its place.

This OEM drain plug in your freezer is a small white circular part located at the bottom. Its purpose is to seal the front hole of the cabinet, which is used to drain water during defrosting. If you notice water leaking or pooling at the bottom, your drain plug may be deformed or broken. Failure to replace the broken plug can result in wa...Read moreter accumulation, ice buildup, and the growth of bacteria or mold. To remove the existing drain plug from your appliance, no tools are needed. You can simply pull it out of its slot. Please keep in mind that this plug is sold individually.

This insulation measures 2.5" thick, 33" wide and 70" long.