8068410 Roper Range - Overview

Diagrams for 8068410

See every part. Know exactly what you need.

Optional Drip Pans And Rings

Parts for the 8068410

Agitator Assembly

★★★★★

(5)

Part #285574

Does not include softener dispenser. **** Some assembly required.****

Small Ring (3 Req)

Part #285573

Small Pan (3 Required)

Part #329942

Large Pan (2 Required)

Part #329943

Instruction Sheet

Part #331933

Pan ring kit

Part #8068410

Exact Part matches for your search term

PAN AND RING KIT COMPLETE

This part number matches the current model number 8068410

Part #8068410

Pan ring kit

This part number matches the current model number 8068410

Part #8068410

Common Symptoms of the 8068410

How this model fails, and the parts that fix it.

Will not agitate

Fixed by
these parts

Show All

Repair Tips From Fixers Like You

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Agitator wasn't spinning well

26 of 31 people found this instruction helpful.

Nora from Marshall, TX
Really Easy
Less than 15 mins
Socket set

First I removed the screw that held it in place with a socket. The agitator became loose and easy to remove at this time so I lifted it from the washing machine. I then just placed the new agitator in place and replaced the screw being careful not to do it too tight. The replacing of this part was an easy job and thanks to Part Select ... Read more

Read less

Was this helpful?

agitator top half would not turn

11 of 13 people found this instruction helpful.

patrick from steubenville, OH
Really Easy
15 - 30 mins
Socket set

unplugged unit,removed liquid cup,removed nut holding agitator,removed agitator installed new one installed nut tightened and tested operation very easy job!

Was this helpful?

top of agitator was stripped

5 of 6 people found this instruction helpful.

Joseph from Winter Haven, FL
Really Easy
Less than 15 mins
Socket set

pulled the detergent cup off, pulled the cap out of the upper part of agitator, removed bolt and pulled assembly out. then reversed the process with the new assembly.

Was this helpful?