80392 - Overview
Models starting with 80392
Click on the best match to narrow your results.
Keep searches simple, eg. "belt" or "pump".
Grommet
PartSelect #: PS9064851
Manufacturer #: 692187
This grommet is an OEM part that is a 45-degree elbow for the crankcase breather tube of your mower engine. That is why it is also known as a 45-degree breather tube.
The part is made of rubber and ...
$6.40
In Stock
Lawn Mower Cotter Pin
PartSelect #: PS9999599
Manufacturer #: 703312
This cotter pin is an OEM part that is 1.25 inches long, gold in color, and sold individually. Made of metal, it can have a range of applications on a variety of lawn and garden equipment. Generally, ...
$6.40
In Stock
Seal-oil
PartSelect #: PS8948679
Manufacturer #: 299819S
This OEM Oil Seal is an individually sold rubber part which is attached around the axis shaft on the crankcase housing to provide a proper seal. A broken seal will lead to a leak, and the part should ...
$7.47
In Stock
Gasket-intake
PartSelect #: PS8941014
Manufacturer #: 27355S
This is an authentic manufacturer sourced replacement part designed for use with a variety of lawn and garden equipment. This carburetor intake gasket which provides an air tight seal for the carburet...
$6.40
In Stock
Line-fuel
PartSelect #: PS9140673
Manufacturer #: 791745
This fuel line is compatible with several different makes and models of small engine equipment and is sold as an individual part. Equipped with the securing clamp, this rubber fuel line is used to tra...
$16.54
On Order
Gasket-breather
PartSelect #: PS8943888
Manufacturer #: 27549S
The Breather Gasket is OEM and used to provide an airtight seal for the breather assembly. It is a gray part, attached between the breather cap and engine. Installation is rated "Easy" and will requir...
$6.40
In Stock
Engine Spark Plug Boot
PartSelect #: PS9055852
Manufacturer #: 66538S
This spark plug boot is a genuine OEM Briggs & Stratton replacement designed to fit securely over the spark plug, protecting the connection from moisture, dirt, and debris. Its durable, elbow-style de...
$6.40
In Stock
Screw, Self Tapping
PartSelect #: PS9084841
Manufacturer #: 7091075SM
It is a genuine item that is supplied by the original equipment manufacturer for use in walk-behind mowers made by Murray, Briggs & Stratton, Snapper, and Simplicity. The self tapping screw attaches t...
$6.40
In Stock
Lawn Mower Nut
PartSelect #: PS9999668
Manufacturer #: 703409
This hex nut is a fastener made from steel and is used to secure the end of a bolt in various lawn and garden equipment and machinery. It is a genuine OEM replacement part that comes in a standard siz...
$8.19
In Stock
Filter-pre Cleaner
PartSelect #: PS8937831
Manufacturer #: 271466
This is an OEM approved replacement part designed for gas trimmers/brush cutters. Its purpose is to filter out dust and debris from the air that goes into the unit. Over time it will get dirty and clo...
$6.40
In Stock
Clamp-hose
PartSelect #: PS9140678
Manufacturer #: 791850
This is a genuine manufacturer-sourced part which is designed for use on lawn and garden equipment. It is an identical replacement for a missing or a damaged clamp that is used to secure the hose. Kee...
$6.40
In Stock
Pin, 3/32 X 1.6
PartSelect #: PS9999596
Manufacturer #: 703300
The hair pin is a silver, metal pin used to secure and lock parts in place. If broken, the part being secured will come loose and the pin should be replaced. This is an OEM part directly from the manu...
$6.40
In Stock
Exact Part matches for your search term
[Viewing 1 of 1]
Side Table, Single, Black, Q 300
This part number matches the current model number 80392
PartSelect #: PS16611430
Manufacturer #: 80392
$56.14
Special Order
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Could not keep an aftermarket muffler on the engine.
Once I determined what OEM muffler I needed, installation was relatively easy. I have a 1982 4hp Briggs on my Snapper tiller. There was a 90* galvanized elbow coming out of the exhaust port, with a bezel nut to lock it down. Do not remove the elbow, even though it appears that you should. If you install the muffler without the elbow the m
... Read more
uffler will parallel the the vacuum for the carburetor and can melt the rubber couplers. Use the elbow to direct the heat away from the carburetor. Use a pipe wrench to lock down the bezel nut because the weight of the muffler, especially under vibration, can work loose and fall down on the tine belt cover and melt it. The bezel nut that comes with the muffler should also be used to lock down the muffler to the threaded intake bracket that comes with the muffler, not to replace the bezel nut for the elbow.
Read less
Parts Used:
-
Richard from KERNERSVILLE, NC
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Wrench set
13 of 17 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!