80345 ((PMA8610)(Series 0)) Snapper Lawn Tractor Accessories - Parts

This danger decal in your lawn equipment is a warning sticker that reminds users to keep their hands and feet away from certain parts of your machine. Measuring approximately 4 inches in both length and width, it has the message DANGER, KEEP HANDS and FEET AWAY written on it in English. Typically, this decal is placed near the dangerous p...Read morearts of your machine, such as its blades, discharge chute, nozzle, impeller, or dashboard. If the danger decal becomes worn, torn, or difficult to read, you must replace it as soon as possible to prevent accidents from occurring. You must place it in a visible location where the person operating your machine can see it and it needs to be near the part that it is warning them about. This OEM-certified sticker is sold individually.

This flange nut is designed for use in lawn and garden equipment. It is an OEM replacement part with a diameter of 0.375 inches and a thread pitch of 16 threads per inch. The nut has a ring-shaped extension on one end, known as a flange which helps to evenly distribute the clamping force of the nut and provide a more secure hold. Addition...Read moreally, the flange eliminates the need for separate washers and reduces the risk of abrasion on the surface being fastened. It is normal for the nut to corrode, crack, or for the threads to wear down over time. To replace the flange nut, unthread it from the fastener, and insert and secure the new one using a socket/wrench. Each sold individually.

This is an authentic OEM sourced replacement part that has been sourced from the original manufacturer to be used with lawn tractors from Snapper and Simplicity. The metal bushing fits into the front wheel mounting bracket. This item is used to provide spacing between the caster and the bracket assembly. The caster busing is sold individually.

This hex bolt is sourced from the original equipment manufacturer. The bolt is designed to fasten two individual parts together in your lawn and outdoor equipment. It is made of steel to withstand harsh environmental conditions and measures 0.25 inches in diameter and 0.62 inches in length. The hex bolt gets its name from its hexagon-shap...Read moreed head, which makes it easy to grip with a wrench or socket. Before installing the new bolt, first clean the threaded hole where the bolt rests to remove any dirt or debris in the area. Once the area is clean you can place the bolt in position using your hands and tighten it using a wrench or socket. It is important not to overtighten as this could damage the area and the bolt. Sold individually.

Spacer 1.0 od x.640

This is an original replacement part manufactured for use with riding lawnmowers. The washer is commonly used to provide a wider surface area to disperse the pressure put on the blade by the bolt that is fastened to the spindle. This washer is available as an individual replacement part, please see model diagram for associative parts.

This item is made of metal and is available as an individual replacement part. The blade handle spring attaches to the idler control rod and the blade on-off handle. When replacing this part a set of pliers might be required during the installation process. Over time this item may break or bend and will need to be replaced. This is a Murr...Read moreay and Snapper replacement part directly sourced from the manufacturer for use in rear engine riders.

Lockwasher split 3/8

This is an authentic Snapper replacement part that has been sourced from the original manufacturer to be used with riding lawnmowers. The coated metal blade connects to the spindle and rotates to cut grass. Over time the mower's blade can wear out and a worn blade can rip and tear the grass rather than cutting it cleanly. Frayed grass end...Read mores can cause a discoloration of the lawn and replacing the worn mower blade can improve the way the grass is cut and can result in a healthier looking lawn. This item is available as an individual replacement part.

This is a genuine manufacturer-supplied part that is made for use with lawn and garden equipment. Washers are commonly utilized to provide a tight fit between connected components. Over time the material will wear out and it may begin to fail eventually requiring a replacement. This high-quality washer is made of durable metal and is sold...Read more individually. Refer to the parts diagrams for your model to ensure the correct repair procedure.

This is a genuine replacement part sourced directly from the manufacturer. The straight lube fitting is commonly found in riding mowers and snowblowers from Snapper and Murray. This part is made of metal, and is generally placed in the hub of the wheel assembly to allow the axle to be lubricated. This item is sold as an individual replacement part.

Pin lynch 7/16