EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

79681072310 Kenmore Dryer - Overview

Diagrams for 79681072310

See every part. Know exactly what you need.

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
4 PACK ROLLER ASSEMBLY – Part Number: 4581EL2002L
$144.76
In Stock
4 PACK ROLLER ASSEMBLY
★★★★★
★★★★★
(82)
Part #4581EL2002L
This part is sold individually. The drum support roller is found in your dryer. It is used to hold the drum in place in the cabinet while letting the drum rotate on the support rollers. It is recommended that you replace both rollers at once. You may notice that this part needs to be replaced if you are experiencing a squeaking noise, which could be due to the bearing going bad. The bearing could be severely damaged if you hear a very loud thumping noise, much like you would when you are drying a pair of shoes.
Thermal Fuse – Part Number: 6931EL3003D
$19.75
In Stock
Thermal Fuse
★★★★★
★★★★★
(28)
Part #6931EL3003D
This thermal fuse acts as a high-limit thermostat, and shuts off the heating element when the dryer overheats by cutting off power to the dryer. If the thermal fuse has blown, the dryer will not start. These fuses cannot be reset, so if yours has blown, you will need to replace it. A common reason for the thermal fuse to blow on a dryer is if the exhaust vent on your dryer is restricted or blocked. Hot air will be confined in the dryer and the fuse will trip and stop the electricity from flowing to the gas valve or heating element.
Blower Thermostat – Part Number: 6931EL3002M
$53.85
In Stock
Blower Thermostat
★★★★★
★★★★★
(8)
Part #6931EL3002M
Monitor exhaust air temperature with this dryer blower housing thermostat. Mounted on the blower assembly, it responds to heat and opens its electrical circuit when the temperature reaches its set limit, helping protect the dryer from overheating. A failed thermostat may interrupt operation, leaving the dryer unable to start or heat properly. Replacing a faulty thermostat helps restore the temperature safety circuit. Unplug the dryer before opening the cabinet, and clear lint from the exhaust path to support proper airflow. This is an OEM part sourced directly from the manufacturer.
High Limit Thermostat and Thermistor Kit – Part Number: AGM30045804
$103.35
In Stock
High Limit Thermostat and Thermistor Kit
★★★★★
★★★★★
(14)
Part #AGM30045804
This dryer thermistor temperature sensor helps monitor and regulate the temperature inside a dryer. This part includes the wire harness. If your dryer overheats, does not produce enough heat, or takes too long to dry, then the thermistor might be defective or damaged. This can cause a fault code and could begin either prolonging or shortening drying time. As a safety precaution, make sure to unplug the dryer from the power source before beginning this installation, and wear gloves to protect your hands. Refer to the installation instructions provided by the manufacturer for further guidance.
Lint Filter – Part Number: ADQ73373201
$77.22
In Stock
Lint Filter
★★★★★
★★★★★
(27)
Part #ADQ73373201
Trap loose fibres and lint with this dryer lint screen filter assembly. Its fine mesh catches debris from the air leaving the drum, while the plastic frame holds the screen securely in place. Torn mesh, a cracked frame, or warping may let lint pass through or keep the filter from seating properly. Replacing a damaged filter helps restore lint collection and proper fit. Remove lint after every load to maintain airflow, and gently wash away residue when needed, allowing the filter to dry fully before reinstalling it. This is an OEM part sourced directly from the manufacturer.
Dryer Thermostat Assembly – Part Number: 6931EL3001F
$58.25
In Stock
Dryer Thermostat Assembly
★★★★★
★★★★★
(2)
Part #6931EL3001F
Temperature protection in the dryer heating system depends on this rear high-limit thermostat assembly. It senses heat at its mounting location and opens the heating circuit when the temperature reaches its cutoff point, helping prevent excessive heat from damaging surrounding components. A faulty thermostat may interrupt heating, leave clothes damp, or prevent normal temperature control. Replacing a failed assembly helps restore the protective switching function needed during drying. The thermostat works within the heating circuit to limit heat when operating temperatures rise too high. This is an OEM part sourced directly from the manufacturer.
Safety Switch Assembly – Part Number: EBF61496102
$52.75
In Stock
Pulley Idle – Part Number: 4560EL3001A
$30.53
In Stock
Pulley Idle
★★★★★
★★★★★
(5)
Part #4560EL3001A
The drive belt moves smoothly around this dryer idler pulley wheel as the motor turns the drum. Working within the belt tensioning mechanism, the pulley guides the belt and helps maintain steady contact with the drive system. A worn, cracked, or seized wheel may cause squealing, grinding, belt slippage, or interrupted tumbling. Replacing a damaged pulley helps restore free belt movement and reliable drum rotation. Its rotating surface supports the belt during operation, reducing the friction that can lead to noise and premature belt wear. This is an OEM part sourced directly from the manufacturer.
Heating Element Assembly – Part Number: 5301EL1001J
$305.98
In Stock
Heating Element Assembly
★★★★★
★★★★★
(9)
Part #5301EL1001J
Heat for drying clothes comes from this electric dryer heating element assembly. Inside the metal housing, resistance coils warm the air before it passes through the drum and removes moisture from laundry. A burned out or broken coil may leave the dryer tumbling without heat or prevent clothes from drying within a normal cycle. Replacing a faulty assembly helps restore heated airflow and normal drying performance. The housing holds the element in place and directs air across the coils as the blower operates. This is an OEM part sourced directly from the manufacturer.
Clamp – Part Number: 4861FR3068A
$16.45
In Stock
Clamp
Part #4861FR3068A
A secure hose connection helps keep water contained inside the appliance. This hose clamp applies pressure around the hose end, holding it firmly against its fitting during operation. A weakened, bent, or broken clamp may allow the connection to loosen and leak into the cabinet or onto the floor. Replacing a damaged clamp helps restore the grip needed to keep the hose attached and sealed. It secures the connection while allowing the hose to be removed when maintenance or replacement is required. This is an OEM part sourced directly from the manufacturer.
Motor Pulley Assembly – Part Number: 4561EL3002A
$69.25
In Stock
Motor Pulley Assembly
★★★★★
★★★★★
(1)
Part #4561EL3002A
Proper belt tension keeps the dryer drum turning steadily during a cycle. This idler pulley assembly guides the drive belt and maintains tension as the motor rotates the drum. A worn, damaged, or seized pulley may cause squealing, allow the belt to slip, or prevent the drum from tumbling. Replacing a faulty assembly helps restore smooth belt movement and reliable drum rotation. The pulley turns continuously against the belt during operation, making a freely rotating wheel important for reducing friction and belt wear. This is an OEM part sourced directly from the manufacturer.
Locker Assembly – Part Number: 4027EL1001B
$35.33
In Stock
Locker Assembly
Part #4027EL1001B

Questions And Answers for 79681072310

Ask our experts a question about this model and we'll get back to you as soon as possible!

Sort by:
  • 1
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Dawn - For model number 79681072310
March 5, 2023
I need a lint trap
Chris Boyle Profile
Hello Dawn, We are glad you asked! The lint trap is PS7787727. We are pleased to have been able to help.
$77.22
In Stock
Lint Filter
2 people found this instruction helpful.
Was this helpful?
Thank you for voting!
Margaret - For model number 79681072310
September 20, 2023
I need a new dryer belt
Chris Boyle Profile
Hi Margaret, thank you for contacting us. The dryer belt compatible with your model is part number PS7785075. Glad to be of help!
$85.65
In Stock
BELT,POLY V
Was this helpful?
Thank you for voting!
Lee - For model number 79681072310
April 7, 2024
I need a front-mount lint filter but cannot find it listed anywhere. I keep getting the message that you can't find such a thing! I'm getting my information from my Use & Care Guide that came with my dryer when I bought it. Where can I get a new replacement for it?
Chris Boyle Profile
Hello Lee, thank you for reaching out. The lint filter for your model is part number PS7787727. If you need help placing an order, customer service is open 7 days a week!
$77.22
In Stock
Lint Filter
Was this helpful?
Thank you for voting!
Leonardjon - For model number 79681072310
December 23, 2024
I brought this dryer home to the Philippines. The power company here supplies 220v line to Ground. Would this dryer be able to work here with this type of supply? My house is wired as L1 - Earth Ground - N
Chris Boyle Profile
Hi Leonardjon, thank you for contacting us. The electrical requirements for this dryer are 240 VAC, 60 Hertz, single-phase circuit fused at 30 amps. This means you will need a step-up transformer to convert the 220-volt supply to 240 volts and ensure the wiring configuration is compatible. We hope this helps.
Was this helpful?
Thank you for voting!
Gloria Sanders - For model number 81072310
June 25, 2026
S/N 510KWNM4U479 This kenmore dryer drys a load of clothes perfectly but then after it’s finished I can’t use the dryer again for a little while as if it’s cooling Down 1st
Chris Boyle Profile
Hi Gloria, thank you for the question. Ensure that there is no air flow restriction and the lint filter is clear from blockage. If it is fine, the issue could be with the thermal fuse, part number PS3530485. It shuts off the heating element when the dryer overheats by cutting off power to the dryer. You may need to replace it to fix the issue. We hope this sorts out your problem!
$19.75
In Stock
Thermal Fuse
Was this helpful?
Thank you for voting!
  • 1

Common Symptoms of the 79681072310

How this model fails, and the parts that fix it.

Watch our pros, then fix it yourself.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Dryer making a thumping and squealing noise when running
132 of 171 people found this instruction helpful.
  • Mark from WAVERLY, OH
  • Easy
  • 30 - 60 mins
  • Screw drivers, Wrench (Adjustable), Wrench set
Had to replace front drum support rollers. Removed screws underneath top in back that held bracket that keeps top in place. Slid top towards rear and lifted up. Removed 4 screws that hold plastic front panel in place (inside..2 on each corner) Unplugged front panel electric plugs to remove panel. Opened door..removed 2 screws at bottom of door opening. Removed screws on top of front panel. Unplugged door switch plug. Removed front panel. Removed right front roller with 9/16th wrench for nut. Adjustable for back of stud. Lifted up on drum to get roller out. Reversed to install. Left roller a bit harder to get to stud. Removed and installed same as right side. Did not attempt to replace rear rollers. Have them if needed but very much more involved to replace.
Was this helpful?
Thank you for voting!
Dryer would run with no heat
98 of 116 people found this instruction helpful.
  • Richard from ORMOND BEACH, FL
  • Easy
  • 30 - 60 mins
  • Screw drivers
I actually went to mr fix it on u tube. Great instruction on how to take dryer apart. First I unplugged the dryer. I found I could reach the heating system by removing the lint tube in the back of the dryer. I put my I phone with the light on inside the back of the dryer and tested the connections to see if all were working. The thermal f use was not working. I removed the two wires , red on top and white on the bottom. Then used a small Phillips screwdriver to remove the two mounting screws and removed the fuse. I then used a vacuum to clear any lint from the back of the dryer and inside the dryer. This took me about an hour and a half. I did it this way because I did not want to disassemble the entire dryer to get to the components. I received the fuse in 3 days and tested it. It was fine. I then put it in the dryer screwed it in place, connected the wires. Replaced the lint tube. This took about 10 minutes. Dryer is running great.
Was this helpful?
Thank you for voting!
Screeching during operation
66 of 101 people found this instruction helpful.
  • CAROL from NAMPA, ID
  • Really Easy
  • More than 2 hours
  • Pliers, Screw drivers
Found disassembly video and watched several times. Suspected that one of the drum wheels had seized up. Found extreme volume of lint and hair inside unit as well as a dryer sheet melted on top of heating unit. Front left drum wheel was worn down from lint and hair jamming its movement. Video made it easy, not a really complicated piec e of machinery. Replaced all 4 wheels due to normal wear on other three. Wanted to be sure drum evenly balanced on all 4. Parts came quickly and were easy to install. My sister and I did this together. Would not recommend doing it alone. Took time to vac and wipe down entire unit. Now it runs so quiet we have to look to see if it is operating. Got a brand new machine out of it, saved a couple of hundred dollars in repair bills, and found 11 cents inside the machine. For your own piece of mind, if you have had your dryer for several years, you need to open it up and clean it out. Its not hard... added note, we are both in our 60's... so if we can do it so can you.... Such a feeling of accomplishment, can't buy that in a store....
Was this helpful?
Thank you for voting!