Quick Question!

Have you ever purchased from PartSelect.com before?

Models > 79579773903

79579773903 Kenmore Freezer - Overview

Get Parts and Repair Help for 79579773903

If you know the freezer repair part you need, you can browse the list of all parts on the 79579773903, or you can search by name or part description. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your freezer. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$8.63

Tube,Plastic

This water tube, or plastic tube, is used in refrigerators and freezers. The tube ensures water is directed to parts of the refrigerator that need it, such as the water dispenser a...

$4.35

Handle Screw

$85.35

Water Filter

The water filter in your refrigerator reduces chlorine, taste, odor, sediment, and rust. This filter needs to be replaced every 300 gallons. If you notice that your water filter in...

$46.54

SHELF, GLASS

$4.35

Spring,Lever

$4.35

Cam,Shaft

$4.35

Cam,Shaft

The purpose of the door latch cam is to keep the door latched when you shut it. If your door is not staying shut, you may need to replace the door latch cam. This part is made of w...

$102.43

Water Inlet Valve Assembly

This includes the primary and secondary valves along with the wire harness.

$59.13

Gasket Assembly,Door

$59.13

Gasket Assembly,Door

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

replace leaking water inlet valve assembly

  • Customer: Richard from JACKSONVILLE, FL
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 5 of 6 people found this instruction helpful
1. Shut off water to refrigerator. 2. Removed bottom sheet metal cover (6 screws). 3. Removed leaking water inlet valve assembly from refrigerator (1 screw). 4. Remove water inlet tube (loosen nut) and tube back to refrigerator (pull from water valve after remove cotter pin washer). 5. Detach two electrical wire harnesses. 6. Install new water inlet valve as... read more

Replace Thermistor in back of freezer

  • Customer: Scott from JUPITER, FL
  • Difficulty: Easy
  • Time to Complete: 1- 2 hours
  • Tools Required: Pliers, Screw drivers
  • 4 of 5 people found this instruction helpful
Turn off power, remove upper and lower drawers (may need to open upper refrigerator doors to remove large freezer bin,) remove drawer supports (upper and lower), remove rear freezer panel (trick is to loosen 4 screws on fan bumpout to get the panel to come free from the freezer side wall), test thermistor with multimeter (should have continuity or near zero ... read more

Broken door gasket retainer

  • Customer: Claude from SAN DIEGO, CA
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 1 of 1 people found this instruction helpful
Go to this site on You Tube to watch the "how to" replace the gasket retainer. The retainer I needed did not come with brackets or the cam you will need. You will need transfer them from the old retainer to the new one. Not hard, just be mindful of position of the items you remove to put them back in place the same way. A metal rod holds the brackets and spr... read more