Quick Question!

Have you ever purchased from PartSelect.com before?

Models > 79579753904

79579753904 Kenmore Freezer - Overview

Get Parts and Repair Help for 79579753904

If you know the freezer repair part you need, you can browse the list of all parts on the 79579753904, or you can search by name or part description. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your freezer. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$8.63

Tube,Plastic

This water tube, or plastic tube, is used in refrigerators and freezers. The tube ensures water is directed to parts of the refrigerator that need it, such as the water dispenser a...

Order within the next 9 hrs and your part ships today!
$4.35

Handle Screw

Order within the next 9 hrs and your part ships today!
$4.35

Stopper,Door

The door stop, or door stopper, is used in refrigerators. This door stop helps keep the door in position and in balance. This part is attached to the bottom of the door and it keep...

Order within the next 9 hrs and your part ships today!
$4.35

Spring,Lever

Order within the next 9 hrs and your part ships today!
$4.35

Cam,Shaft

Order within the next 9 hrs and your part ships today!
$4.35

Cam,Shaft

The purpose of the door latch cam is to keep the door latched when you shut it. If your door is not staying shut, you may need to replace the door latch cam. This part is made of white plastic and is about 2 inches in length. The door latch cam is located at the top of the door, and you will need to remove the trim that covers the gasket in order to access the door latch cam. To complete this repair, you will need a flat blade screwdriver to pop out the plastic tabs holding the gasket in place. This part is sold individually.

Order within the next 9 hrs and your part ships today!
$102.43

Water Inlet Valve Assembly

This includes the primary and secondary valves along with the wire harness.

Order within the next 9 hrs and your part ships today!
$59.13

Gasket Assembly,Door

Order within the next 9 hrs and your part ships today!
$59.13

Gasket Assembly,Door

Order within the next 9 hrs and your part ships today!
$32.77

Basket Assembly,Door

Order within the next 9 hrs and your part ships today!
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

replace leaking water inlet valve assembly

  • Customer: Richard from JACKSONVILLE, FL
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 5 of 6 people found this instruction helpful
1. Shut off water to refrigerator. 2. Removed bottom sheet metal cover (6 screws). 3. Removed leaking water inlet valve assembly from refrigerator (1 screw). 4. Remove water inlet tube (loosen nut) and tube back to refrigerator (pull from water valve after remove cotter pin washer). 5. Detach two electrical wire harnesses. 6. Install new water inlet valve as... read more

Replace Thermistor in back of freezer

  • Customer: Scott from JUPITER, FL
  • Difficulty: Easy
  • Time to Complete: 1- 2 hours
  • Tools Required: Pliers, Screw drivers
  • 4 of 5 people found this instruction helpful
Turn off power, remove upper and lower drawers (may need to open upper refrigerator doors to remove large freezer bin,) remove drawer supports (upper and lower), remove rear freezer panel (trick is to loosen 4 screws on fan bumpout to get the panel to come free from the freezer side wall), test thermistor with multimeter (should have continuity or near zero ... read more

The lights wouldn't always come on.

  • Customer: Linda from VALE, OR
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Pliers, Screw drivers
  • 2 of 2 people found this instruction helpful
I actually watched a YouTube video for LG refrigerators. The hardest part was taking the wire harness out. Mine was really stuck in there. But got it, put the new switch in and viola it worked. Yay! read more