EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

79578412800 Kenmore Freezer - Overview

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Refrigerator Door Switch – Part Number: 6600JB1010A
$24.67
In Stock
Refrigerator Door Switch
★★★★★
★★★★★
(98)
Part #6600JB1010A
Opening the refrigerator door releases this push-button switch to turn on the interior light, making stored food easier to see. When the door closes, it presses the button and turns the light off. A stuck, worn, or broken switch may leave the light off when the door is open or keep it on after closing. Replacing a faulty switch helps restore normal lighting control and reliable response to door movement. Disconnect the refrigerator from power before removing or installing the switch. This is an OEM part sourced directly from the manufacturer.
Plastic Tube - 5/16 Inch – Part Number: MJU62070602
$28.55
In Stock
Plastic Tube - 5/16 Inch
★★★★★
★★★★★
(24)
Part #MJU62070602
Water travels between refrigerator plumbing components through this plastic water line tubing. The tube provides an enclosed path for water supplied to the dispenser and ice maker, helping maintain delivery through the internal system. Cracks, punctures, or brittle sections may cause leaks, while kinks can restrict flow and reduce dispenser output or ice maker filling. Replacing damaged tubing helps restore a contained water path and steady flow. Shut off the refrigerator water supply before disconnecting the line, and inspect the completed connections for leaks after installation. This is an OEM part sourced directly from the manufacturer.
Refrigerator Water Filter LT600P – Part Number: 5231JA2006F
$65.48
In Stock
Refrigerator Water Filter LT600P
★★★★★
★★★★★
(13)
Part #5231JA2006F
This refrigerator water filter is designed to improve the taste and odor of both water and ice by reducing a wide range of contaminants. Utilizing an activated carbon block filtration method, it effectively captures impurities such as lead, chlorine, mercury, cysts, asbestos, and particulates, while allowing fluoride to pass through. The filter is certified to meet NSF/ANSI Standards 42 and 53 for water purification, ensuring reliable performance and safety. With a lifespan of approximately six months or 300 gallons—depending on water quality and usage—it provides consistent filtration and supports the overall efficiency of your refrigerator’s water system.
Drawer Rail Guide  - Right Side – Part Number: 4975JJ2028C
No Longer Available
Drawer Rail Guide - Right Side
★★★★★
★★★★★
(26)
Part #4975JJ2028C
This guide rail, also known as a drawer slide rail, is a genuine OEM replacement part for the freezer section of your refrigerator. This slide rail supports the storage basket in your freezer, allowing you to slide it open with ease. Our customers have rated this repair as easy.
Door Stopper – Part Number: 4620JJ2009A
$25.25
In Stock
Door Stopper
★★★★★
★★★★★
(8)
Part #4620JJ2009A
Controlled door travel helps prevent a refrigerator door from swinging beyond its intended opening range. This white plastic door stopper mounts near the bottom of the door and provides a stopping point as it opens. A cracked, worn, or broken stopper may allow excessive movement or fail to stop the door normally. Replacing a damaged stopper helps restore the intended swing limit and reduces strain caused by overextension. The stopper works with the hinge assembly to provide a mechanical limit during everyday opening and closing. This is an OEM part sourced directly from the manufacturer.
Bushing – Part Number: 4984JJ3003A
$25.25
In Stock
Bushing
★★★★★
★★★★★
(13)
Part #4984JJ3003A
Smooth refrigerator door movement depends on a stable pivot around the hinge pin. This white plastic door hinge bushing fits inside the door and provides a low friction surface for the metal pin as the door opens and closes. Wear, cracks, or a broken bushing may allow the door to sag, move unevenly, or make squeaking and grinding noises. Replacing a damaged bushing helps restore hinge support and smoother movement, allowing the door to settle more evenly against the cabinet for proper gasket contact. This is an OEM part sourced directly from the manufacturer.
Plastic Tube – Part Number: 5210JA3005E
$36.25
In Stock
Plastic Tube
★★★★★
★★★★★
(4)
Part #5210JA3005E
This part is the replacement water line or tube for your refrigerator. It is made of white plastic and is sold individually. This tube supplies water to the ice maker and water dispenser If your refrigerator is leaking, or it will not dispense water or ice, you may have a damaged water line. When you replace the water line, you may want to pick up a new water tube union as well. You can use a utility knife to cut the old water line where it is damaged and use the union to attach the new water line to the old one. This tubing is an OEM part from the manufacturer.
Lower Holder Cover – Part Number: 4930JJ2021A
$26.91
Special Order
Lower Holder Cover
★★★★★
★★★★★
(11)
Part #4930JJ2021A
This lower holder cover is also known as a toe grille clip, or a kickplate clip. It is designed for use with refrigerators. The main purpose of this part is to hold the molding at the base of your refrigerator in place, it also makes removing the piece of molding simple. If you notice that the kickplate on your appliance is loose or will not stay in place you may need to replace one or more of these clips. This part is made of plastic, and it is sold individually.
Screw – Part Number: 1SZZJA3011B
$17.55
In Stock
Rail Guide Assembly - Left Side – Part Number: 4975JJ2028D
No Longer Available
Rail Guide Assembly - Left Side
★★★★★
★★★★★
(15)
Part #4975JJ2028D
This is the left side drawer slide for models of LG refrigerator-freezers. This drawer slide supports the drawer inside the freezer of your refrigerator and allows it to slide back and forth smoothly. This specific slide is installed on the left side and cannot be installed on the right side of the freezer. This slide measures approximately 15 inches long and is made of white plastic. If your current drawer slide is broken and unable to support the drawer inside your freezer, it must be replaced immediately for the drawer to safely move and be supported. Replacing this slide only requires a screwdriver to disconnect the old one and install the new one. This slide is sold individually and does not include the necessary securing screw or the slide for the right side.
Crisper Frame - White – Part Number: 3550JJ1108A
$299.94
Special Order
Crisper Frame - White
★★★★★
★★★★★
(11)
Part #3550JJ1108A
Glass is NOT included. Frame only.
Refrigerator Shaft Cam – Part Number: 4430JJ2005A
$36.25
In Stock
Refrigerator Shaft Cam
★★★★★
★★★★★
(1)
Part #4430JJ2005A
This shaft cam regulates the doors pivoting movement, allowing it to open and close smoothly while maintaining proper alignment. It helps control door tension, ensuring the door seats correctly against the gasket for a reliable seal.

Manuals & Care Guides for 79578412800

Click to download

Common Symptoms of the 79578412800

How this model fails, and the parts that fix it.

Watch our pros, then fix it yourself.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Broken water line
53 of 72 people found this instruction helpful.
  • Debbie from FISHER, AR
  • Really Easy
  • 15 - 30 mins
  • Screw drivers
Remove water filter and water filter holder. Removed cover on back of frig. Removed clip where water line connects to back of water filter. Took half inch wrench pushed in on water line lock to release line. Repeat at other end. Reverse steps to put on new line. Easy repair.
Was this helpful?
Thank you for voting!
Ice was building up in the bottom floor of the freezer
42 of 53 people found this instruction helpful.
  • Ronald S. from SANTA CLARITA, CA
  • A Bit Difficult
  • 30 - 60 mins
  • Screw drivers, Socket set
This refrigerator/freezer problem had been escalating for almost a year, requiring me to frequently knock the ice buildup free with a rubber mallet. I finally decided to try to identify the problem by removing the freezer door and all of the shelves and shelf tracks (easily removed with only a phillips screwdriver). Then I removed the bac k plastic panel to expose the cooling coils, which were partially encased in ice. I deduced that the evaporator fan motor was failing, which blows air over the freezer cooling coils and forces the cool air up into the upper refrigerator section (which was not staying cold). I then found and ordered the fan motor from part select. Their search function and exploded drawing schematics made it easy to identify the part and part number. It seems the original part number had been superceded with a new number, which I ordered. Once it arrived after about a week, I transferred the fan blades from the old motor to the new fan motor, and after completely drying out the freezer compartment, I reinstalled all of the parts and plugged in the unit and waited. By the next day, the refrigerator was operating at peak efficiency, and the ice buildup in the freezer has not returned. I was very close to scrapping the entire refrigerator as junk, but with a little diagnostic effort and about $110 for the new motor, I have a fully functioning refrigerator again. Thanks to Part Select for a great experience.
Was this helpful?
Thank you for voting!
Remove and replace light switch
45 of 91 people found this instruction helpful.
  • Debbie from Waltham, MA
  • A Bit Difficult
  • 30 - 60 mins
  • Pliers, Screw drivers
Video makes it look easy. Kenmore refrigerator does not have "groove" along the right hand side of switch that allows for pushing down on release. Used a thin screwdriver to get under to push while holding switch edge with pliers. Kept slipping. Tape sides to avoid scratching inside of refrigerator.
Was this helpful?
Thank you for voting!