EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

79574015411 Kenmore Refrigerator - Overview

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Door Bin – Part Number: AAP73252202
$81.35
In Stock
Door Bin
★★★★★
★★★★★
(26)
Part #AAP73252202
Add useful storage space inside a refrigerator door with this clear plastic door bin. It holds bottles, jars, drinks, and condiments where they are easy to see and reach. The bin measures about 13-1/2 inches wide and 4-1/4 inches high. Its shaped base is about 9-1/2 inches deep on one side and 10-1/8 inches deep on the other. Installation requires no tools. Place the bin slightly above the mounting points, then slide it down until it locks into place. Compare the size, shape, and side mounts with the original bin before ordering.
Air Cleaner Filter Assembly – Part Number: ADQ73214408
$47.40
In Stock
Air Cleaner Filter Assembly
★★★★★
★★★★★
(17)
Part #ADQ73214408
This air filter assembly is a genuine replacement part designed to improve air quality inside select LG and Kenmore Elite refrigerators. Using activated carbon, it effectively traps and neutralizes odors and airborne impurities, helping maintain a clean environment that supports longer food freshness. The filter is housed within a dedicated compartment and should be replaced approximately every six months or when indicated by the refrigerator’s filter light. Installation involves locating the filter housing, powering off the appliance, removing the old filter, and inserting the new one with proper alignment. After installation, reassemble the housing, restore power, and reset the filter indicator to ensure accurate tracking. This OEM component ensures a precise fit and optimal performance for compatible models.
Roller Assembly – Part Number: AHJ72909001
$37.35
In Stock
Roller Assembly
★★★★★
★★★★★
(11)
Part #AHJ72909001
Easier access to frozen food starts with a drawer that rolls smoothly along its supports. This freezer drawer roller assembly supports the drawer during movement and reduces friction as it opens and closes. A cracked, worn, or seized roller may cause dragging, uneven travel, or difficulty reaching items inside the freezer. Replacing a damaged assembly helps restore stable drawer movement and smoother operation. The roller turns against the drawer track, carrying the load as the drawer moves in and out during everyday use. This is an OEM part sourced directly from the manufacturer.
Refrigerator Ice Maker Assembly – Part Number: AEQ72909603
$286.20
In Stock
Refrigerator Ice Maker Assembly
★★★★★
★★★★★
(26)
Part #AEQ72909603
This ice maker assembly is for refrigerators. This Ice maker assembly contains the complete ice maker and housing. The assembly may include multiple parts; refer to your parts diagram for a complete list of parts included.
Glass Shelf – Part Number: MHL42613220
$48.45
In Stock
Glass Shelf
★★★★★
★★★★★
(21)
Part #MHL42613220
This glass shelf provides storage space in your refrigerator above the crisper. Shelves can crack and chip due to frequent use, and should be replaced immediately if cracks start to appear. This shelf measures approximately 30.5 inches wide by 15 inches deep and is for LG refrigerators. Replacing a damaged shelf is easy, carefully remove the faulty shelf and install the new one. Be sure to wear protective gloves if the existing shelf is cracked or broken.
Freezer Door Gasket – Part Number: MDS38201426
$83.04
In Stock
Freezer Door Gasket
★★★★★
★★★★★
(5)
Part #MDS38201426
Keep frozen food protected from warm air leaks with this freezer door gasket. Its flexible sealing edge fits around the door perimeter and rests against the cabinet when closed, helping retain cold air and limit incoming moisture. Tears, cracks, or warped sections may cause frost buildup, condensation, or longer running times. Replacing a damaged gasket helps restore a snug seal. Before installation, smooth shipping creases with warm water and clean the retaining groove, then seat the corners first and check for even contact along every edge. This is an OEM part sourced directly from the manufacturer.
Door Gasket Assembly – Part Number: ADX72930461
$104.88
In Stock
Door Gasket Assembly
★★★★★
★★★★★
(7)
Part #ADX72930461
This is a door seal, also known as a door gasket, for LG refrigerators. This door gasket is used to seal the warmer room temperature from the cooler fridge interior. If the gasket for your refrigerator is warped, moldy, or damaged in any way, it needs to be replaced immediately. To replace this gasket, simply pull off the old gasket to remove it, and carefully wrap the new gasket around the door perimeter. This gasket is sold individually and does not include any other parts.
Compressor – Part Number: TCA38151706
$497.15
Special Order
Compressor
★★★★★
★★★★★
(1)
Part #TCA38151706
This part must be installed by a licensed and trained LG technician that is able to perform a software update, which is required for the installation of this compressor. Part number CJT30000002 is needed to perform the update. Also, the three pins on the side of the new compressor may be oriented differently than the original. If different, when installing the new compressor the compressor electrical connector must be rotated 45 degrees counter-clockwise.
GASKET ASSEMBLY,DOOR – Part Number: ADX72930460
$104.88
In Stock
GASKET ASSEMBLY,DOOR
Part #ADX72930460
This fridge gasket, also known as a door seal, is an authentic OEM part supplied by LG for use with various models of LG refrigerators. It is a flexible strip of rubber that sits along the perimeter of the refrigerator. It creates an airtight seal between the door and fridge body to prevent cold air from escaping and warm air from entering. This helps to keep your fridge cool and energy efficient. If the gasket is worn out, torn, or can no longer maintain a tight seal, your fridge will have to work harder to maintain the correct temperature inside the fridge. You may also notice that the door may not be able to close properly.
Clip – Part Number: 4004JA3002A
$36.25
Special Order
Clip
★★★★★
★★★★★
(2)
Part #4004JA3002A
This water tubing clip holds the water fill tube in place in your refrigerator. The water fill tube attaches and supplies water to the ice maker/water dispenser in your fridge-freezer. If the tubing is in working order, but is hanging loose inside the unit, the issue could be that the clip meant to hold it in place is broken. If this is the case, you should look to replace the clip. This clip is made of black plastic, and is just over half an inch long. This is a genuine OEM replacement part, and is sold separately.
Water Valve – Part Number: 5220JB2010A
$77.65
In Stock
Water Valve
★★★★★
★★★★★
(3)
Part #5220JB2010A
Controlled water delivery starts with this refrigerator water inlet valve, which opens in response to an electrical signal and closes when the water request ends. It regulates incoming water used by the ice maker and dispenser. A leaking or failed valve may prevent filling, interrupt water dispensing, or produce unusual buzzing during operation. Replacing a faulty valve helps restore reliable water flow and proper shutoff between requests. The valve connects the household supply line to the refrigerator water system, keeping incoming water controlled throughout normal use. This is an OEM part sourced directly from the manufacturer.
Fan Assembly – Part Number: 5901JA1021A
$28.26
In Stock
Fan Assembly
★★★★★
★★★★★
(1)
Part #5901JA1021A
A damaged evaporator fan blade may cause ticking, buzzing, weak airflow, or uneven cooling. These problems can also come from ice buildup or a faulty fan motor, so inspect the area before ordering. This replacement blade circulates cold air inside select refrigerators. Use the complete refrigerator model number to guarantee the proper fit. Unplug the refrigerator and safely store frozen food before removing the freezer panel. If ice blocks the fan, allow it to melt fully. Do not use sharp tools or direct high heat to remove the ice. This is an OEM part sourced directly from the manufacturer.

Questions And Answers for 79574015411

Ask our experts a question about this model and we'll get back to you as soon as possible!

Sort by:
  • 1
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Tim - For model number 79574015411
March 23, 2025
Need PN for door bin on the LEFT side only.
Chris Boyle Profile
Hi Tim, thank you for contacting us. The door bins for the left side of your model are part number PS12076385. They are sold individually. We hope that helps!
$97.01
Special Order
BASKET ASSEMBLY,DOOR
1 person found this instruction helpful.
Was this helpful?
Thank you for voting!
Robert - For model number 79574015411
November 25, 2022
Refrigerator sounds like it's running, but inside is not cold
Chris Boyle Profile
Hi Robert, thank you for the question. According to our research on the model, we would suggest checking the door seals as they may not seal properly if they are dirty, damaged, or worn which can cause your refrigerator to leak cool air. If they are good, we would recommend checking the Defrost Sensor Assembly, part number PS3529165, and Evaporator Fan Motor, part number PS10058947. If you require assistance to place an order, please contact customer service. We hope that helps!
$50.55
In Stock
Defrost Sensor Assembly
$99.29
In Stock
Evaporator Fan Motor
Was this helpful?
Thank you for voting!
  • 1

Common Symptoms of the 79574015411

How this model fails, and the parts that fix it.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Replaced Old Molded Gasket with new one
9 of 9 people found this instruction helpful.
  • Megan from Elk Grove, CA
  • Very Easy
  • Less than 15 mins
  • Screw drivers
For the right side of the refrigerator door, just pulled off the old gasket and replaced it with the new one. Old gasket came off easily. Just had to pull it off. No screws on the right side. Just pushed the new one in place in the groove on the door.

For the left side, needed a Phillip’s screwdriver to remove the flap first. H elps to have a second person hold the door from moving. Once flap was off, pulled the old gasket off and installed the new one just like the right side. Then screwed the flap back on once the gasket was in the groove properly.

Initially after install, it seemed like the magnet on the door was not strong enough but after a couple of days, the magnet seems a lot stronger, sealing the air out. Very happy I replaced it. It was a lot simpler to replace than I thought it would be.
Was this helpful?
Thank you for voting!
Icemaker quit releasing ice from tray and water was pouring and freezing in ice storage bin
13 of 24 people found this instruction helpful.
  • Amber from PEORIA, IL
  • Really Easy
  • 15 - 30 mins
  • Screw drivers
This couldn't have been easier. Two tiny screws in the front needed unscrewed, and then two plastic clips in the middle just had to be popped lose. Finally, you unplugged the power cord. Then, you just needed to reverse the process by plugging the new ice maker in, popping the clips in place, and screwing the two holes back in and turning the whole thing on. Voila! Perfect ice cubes again. And for only a little over $100.
Was this helpful?
Thank you for voting!
needed to replace broken ice maker
11 of 18 people found this instruction helpful.
  • John from WEST ROCKPORT, ME
  • Very Easy
  • Less than 15 mins
  • Screw drivers
Take out 2 screws and unplug unit before removing. Plug-in new unit and screw in 2 screws. That's it.
Was this helpful?
Thank you for voting!