EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

79573165610 Kenmore Refrigerator - Overview

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Refrigerator Water Filter LT700P – Part Number: AGF80300702
$72.73
In Stock
Refrigerator Water Filter LT700P
★★★★★
★★★★★
(22)
Part #AGF80300702
This refrigerator water filter replacement is for 2010 LG refrigerators that have either forward French doors or are the four-door dispensing models. This filter is designed to minimize impurities that can cause ill-tasting water or an unpleasant smell. It reduces sediment, dirt, rust, limescale, sand, and many other contaminants that can be harmful to your health and the life of your appliance. This filter should be replaced every 6 months or 200 gallons to ensure top quality performance. To remove your unwanted filter, press the push button to open the filter cover (water may spill from the hole), pull out the old cartridge in a downward motion. To install the new filter, make it so the ears are in the horizontal position and push the new cartridge into the housing until it stops. Push the filter upward until it is secure. Click the cover to lock it in place. Run water for approximately 5 minutes to prep the filter for use, and discard water. Reset the “filter reset” button if applicable.
Plastic Tube - 5/16 Inch – Part Number: MJU62070602
$28.55
In Stock
Plastic Tube - 5/16 Inch
★★★★★
★★★★★
(24)
Part #MJU62070602
Water travels between refrigerator plumbing components through this plastic water line tubing. The tube provides an enclosed path for water supplied to the dispenser and ice maker, helping maintain delivery through the internal system. Cracks, punctures, or brittle sections may cause leaks, while kinks can restrict flow and reduce dispenser output or ice maker filling. Replacing damaged tubing helps restore a contained water path and steady flow. Shut off the refrigerator water supply before disconnecting the line, and inspect the completed connections for leaks after installation. This is an OEM part sourced directly from the manufacturer.
Door Shelf Bin Assembly – Part Number: AAP73252302
$82.15
In Stock
Door Shelf Bin Assembly
★★★★★
★★★★★
(20)
Part #AAP73252302
This refrigerator door bin provides handy storage for condiments, jars, bottles, and other small items. It attaches to the inside of the door, keeping everyday foods easy to reach while freeing up space on the main shelves. The raised sides help keep items in place as the door opens and closes. Cracks, broken mounting tabs, or a damaged base may leave the bin loose or unable to hold items safely. Replacing a broken bin restores useful storage and helps keep your refrigerator organized. This is an OEM part sourced directly from the manufacturer.
Air Cleaner Filter Assembly – Part Number: ADQ73214408
$47.40
In Stock
Air Cleaner Filter Assembly
★★★★★
★★★★★
(17)
Part #ADQ73214408
This air filter assembly is a genuine replacement part designed to improve air quality inside select LG and Kenmore Elite refrigerators. Using activated carbon, it effectively traps and neutralizes odors and airborne impurities, helping maintain a clean environment that supports longer food freshness. The filter is housed within a dedicated compartment and should be replaced approximately every six months or when indicated by the refrigerator’s filter light. Installation involves locating the filter housing, powering off the appliance, removing the old filter, and inserting the new one with proper alignment. After installation, reassemble the housing, restore power, and reset the filter indicator to ensure accurate tracking. This OEM component ensures a precise fit and optimal performance for compatible models.
Freezer Door Gasket – Part Number: MDS38201426
$83.04
In Stock
Freezer Door Gasket
★★★★★
★★★★★
(5)
Part #MDS38201426
Keep frozen food protected from warm air leaks with this freezer door gasket. Its flexible sealing edge fits around the door perimeter and rests against the cabinet when closed, helping retain cold air and limit incoming moisture. Tears, cracks, or warped sections may cause frost buildup, condensation, or longer running times. Replacing a damaged gasket helps restore a snug seal. Before installation, smooth shipping creases with warm water and clean the retaining groove, then seat the corners first and check for even contact along every edge. This is an OEM part sourced directly from the manufacturer.
Door Gasket Assembly – Part Number: ADX72930461
$104.88
In Stock
Door Gasket Assembly
★★★★★
★★★★★
(7)
Part #ADX72930461
This is a door seal, also known as a door gasket, for LG refrigerators. This door gasket is used to seal the warmer room temperature from the cooler fridge interior. If the gasket for your refrigerator is warped, moldy, or damaged in any way, it needs to be replaced immediately. To replace this gasket, simply pull off the old gasket to remove it, and carefully wrap the new gasket around the door perimeter. This gasket is sold individually and does not include any other parts.
Micro Switch – Part Number: 6600JB3001C
$47.25
In Stock
Micro Switch
★★★★★
★★★★★
(4)
Part #6600JB3001C
This is a micro switch for various models of LG refrigerators. This switch is responsible for turning the ice dispenser on and off within the freezer compartment of the fridge. If this switch is damaged or shorted, it will cause the ice maker to work inconsistently, or not at all. This switch is different from the water dispenser switch, which has an entirely different shape all together. Replacing this switch is simple and only requires a Philips-head screwdriver to disconnect the old switch and install the new one. This switch is a genuine OEM LG part and does not come with any other parts or accessories.
Compressor – Part Number: TCA38151706
$497.15
Special Order
Compressor
★★★★★
★★★★★
(1)
Part #TCA38151706
This part must be installed by a licensed and trained LG technician that is able to perform a software update, which is required for the installation of this compressor. Part number CJT30000002 is needed to perform the update. Also, the three pins on the side of the new compressor may be oriented differently than the original. If different, when installing the new compressor the compressor electrical connector must be rotated 45 degrees counter-clockwise.
GASKET ASSEMBLY,DOOR – Part Number: ADX72930460
$104.88
In Stock
GASKET ASSEMBLY,DOOR
Part #ADX72930460
This fridge gasket, also known as a door seal, is an authentic OEM part supplied by LG for use with various models of LG refrigerators. It is a flexible strip of rubber that sits along the perimeter of the refrigerator. It creates an airtight seal between the door and fridge body to prevent cold air from escaping and warm air from entering. This helps to keep your fridge cool and energy efficient. If the gasket is worn out, torn, or can no longer maintain a tight seal, your fridge will have to work harder to maintain the correct temperature inside the fridge. You may also notice that the door may not be able to close properly.
WATER INLET VALVE – Part Number: AJU72992603
$134.87
In Stock
WATER INLET VALVE
★★★★★
★★★★★
(1)
Part #AJU72992603
Dispensing water and filling the ice maker require controlled flow through this refrigerator water inlet valve assembly. Electrically operated solenoids open the water passages when requested by the appliance controls and close them when delivery ends. A cracked or faulty valve may leak, restrict dispenser flow, or prevent the ice maker from receiving enough water. Replacing a failed assembly helps restore reliable water routing and proper shutoff between requests. It connects the incoming supply to the internal water circuits used during everyday dispensing and ice production. This is an OEM part sourced directly from the manufacturer.
Clip – Part Number: 4004JA3002A
$36.25
Special Order
Clip
★★★★★
★★★★★
(2)
Part #4004JA3002A
This water tubing clip holds the water fill tube in place in your refrigerator. The water fill tube attaches and supplies water to the ice maker/water dispenser in your fridge-freezer. If the tubing is in working order, but is hanging loose inside the unit, the issue could be that the clip meant to hold it in place is broken. If this is the case, you should look to replace the clip. This clip is made of black plastic, and is just over half an inch long. This is a genuine OEM replacement part, and is sold separately.
Refrigerator Ice Maker – Part Number: AEQ73130004
$219.15
In Stock
Refrigerator Ice Maker
★★★★★
★★★★★
(4)
Part #AEQ73130004
Enjoy a ready supply of ice with this refrigerator ice maker assembly. It receives water from the inlet valve, holds it in a mold while it freezes, and releases finished cubes into the storage bin. The assembly then repeats the cycle as more ice is needed. A failed mechanism may stop making ice or leave frozen cubes stuck in the mold. Replacing a faulty unit helps restore automatic ice production. Unplug the refrigerator and shut off its water supply before removing or installing the assembly. This is an OEM part sourced directly from the manufacturer.

Questions And Answers for 79573165610

Ask our experts a question about this model and we'll get back to you as soon as possible!

Sort by:
  • 1
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Owen - For model number 79573165610
November 22, 2022
I need water tubing for kenmore elite.model #79573165610
Chris Boyle Profile
Hello Owen, thank you for your question. This water tube is part PS3536013. The tube ensures water is directed to parts of the refrigerator that need it, such as the water dispenser and ice maker. . We hope this helps.
$28.55
In Stock
Plastic Tube - 5/16 Inch
Was this helpful?
Thank you for voting!
Bonnie - For model number 79573165610
July 23, 2025
Need right door wide bottom bin.
Chris Boyle Profile
Hi Bonnie, thank you for reaching out. The door bin you are looking for is part number PS7794175. We hope that helps!
$63.24
In Stock
BASKET,DOOR
Was this helpful?
Thank you for voting!
Thomas - For model number 79573165610
July 29, 2026
I don't see a ice maker on your website
Chris Boyle Profile
Hello Thomas, thank you for reaching out. The replacement ice maker for your model is part number PS10063167. We hope this information helps!
$219.15
In Stock
Refrigerator Ice Maker
Was this helpful?
Thank you for voting!
  • 1

Common Symptoms of the 79573165610

How this model fails, and the parts that fix it.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Replaced Old Molded Gasket with new one
9 of 9 people found this instruction helpful.
  • Megan from Elk Grove, CA
  • Very Easy
  • Less than 15 mins
  • Screw drivers
For the right side of the refrigerator door, just pulled off the old gasket and replaced it with the new one. Old gasket came off easily. Just had to pull it off. No screws on the right side. Just pushed the new one in place in the groove on the door.

For the left side, needed a Phillip’s screwdriver to remove the flap first. H elps to have a second person hold the door from moving. Once flap was off, pulled the old gasket off and installed the new one just like the right side. Then screwed the flap back on once the gasket was in the groove properly.

Initially after install, it seemed like the magnet on the door was not strong enough but after a couple of days, the magnet seems a lot stronger, sealing the air out. Very happy I replaced it. It was a lot simpler to replace than I thought it would be.
Was this helpful?
Thank you for voting!
Water feed line running from water valve to filter housing was leaking
13 of 21 people found this instruction helpful.
  • Tom from EASTON, PA
  • Easy
  • 30 - 60 mins
  • Screw drivers, Wrench (Adjustable)
Shut off water supply. Disconnect main supply line. Remove rear lower panel on back of refrigerator. Remove all tubing clamps on back. Disconnect leaking tubing from water supply valve. Remove water filter and unscrew/remove water filter housing. Replace tubing - connect to water filter housing then to water supply valve. Reconnect filter housing and filter. Reinstall lower panel, then main water supply line, then all tubing clamps. Turn water back on and check for leaks after discarding several glasses of water to fill filter. Job complete!
Was this helpful?
Thank you for voting!
Ice Maker Quit Making Ice
8 of 12 people found this instruction helpful.
  • Jeff from HUMBLE, TX
  • Very Easy
  • Less than 15 mins
  • Screw drivers
For this model the ice maker is very easy to replace. All it takes is a phillips head screwdriver. There are two wire connections you have to unplug. Easy out easy in. You do not have to disconnect the water line, just make sure the line is lined up correctly when you reinstall the new icemaker. It seems to take approximately 8 hours befo re you start getting ice again. If you have this same model, you already know this ice maker is very slow in making ice and is not able to keep up with daily usage of ice for a household of 3.
Was this helpful?
Thank you for voting!