EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

79573105710 Kenmore Refrigerator - Overview

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Refrigerator Front Plate Assembly – Part Number: AGU75188619
$164.47
In Stock
Refrigerator Front Plate Assembly
★★★★★
★★★★★
(102)
Part #AGU75188619
This front plate assembly, also known as a mullion or flipper, is a genuine replacement part designed for select LG and Kenmore French-door refrigerators. It serves a critical function by sealing the gap between the doors, preventing cold air from escaping and helping maintain consistent internal temperatures. Constructed from durable plastic, it supports both the performance and appearance of the appliance. A failing mullion may result in poor sealing, visible gaps, increased energy consumption, and potential food spoilage. Replacing this component can restore proper door alignment and improve overall efficiency. Compatibility should be confirmed using your refrigerator’s model number prior to installation.
Door Gasket - Gray - Right Side – Part Number: ADX73550624
$56.33
In Stock
Door Gasket - Gray - Right Side
★★★★★
★★★★★
(41)
Part #ADX73550624
This door gasket is used to make an air-tight seal for the cabinet when the door is closed
Door Stopper – Part Number: 4620JJ2009A
$15.00
In Stock
Door Stopper
★★★★★
★★★★★
(8)
Part #4620JJ2009A
The door stop, or door stopper, is used in refrigerators. This door stop helps keep the door in position and in balance. This part is attached to the bottom of the door and it keeps it from opening and hitting the side of the refrigerator cabinet. If you find your door hits and scratches your lower cabinet when you open your fridge door, installing this part can be a solution to this problem. Make sure to unplug your appliance from the power source before installing this part and safely store food to prevent it from deteriorating. Refer to the diagram provided by the manufacturer for further instruction.
Roller Assembly – Part Number: AHJ72909001
$23.60
In Stock
Roller Assembly
★★★★★
★★★★★
(11)
Part #AHJ72909001
This is a drawer roller for the freezer compartment of your LG refrigerator. This roller is made of white plastic, and acts as a wheel to allow the drawer to glide smoothly back and forth when you open and close the freezer compartment. Over time and with further frequent use, this roller can crack, break, or stop rolling smoothly, at which point it will need replacing. Your refrigerator comes with two rollers, and this roller is sold individually, so consider how many rollers you require before ordering.
Water Inlet Valve Assembly – Part Number: AJU72992601
$122.57
In Stock
Water Inlet Valve Assembly
★★★★★
★★★★★
(16)
Part #AJU72992601
This includes the primary and secondary valves along with the wire harness.
Refrigerator Water Filter LT1000P – Part Number: AGF80300704
$75.43
In Stock
Refrigerator Water Filter LT1000P
★★★★★
★★★★★
(2)
Part #AGF80300704
The Water filter reduces contaminants such as lead, iron, and chlorine from drinking water. This OEM filter is a genuine part manufactured by LG for use in refrigerators. We recommend you replace every 6 months or 200 gallons for best performance.
Refrigerator Ice Maker Kit Assembly – Part Number: AEQ73110210
$194.94
In Stock
Refrigerator Ice Maker Kit Assembly
★★★★★
★★★★★
(34)
Part #AEQ73110210
This ice maker assembly kit is designed to restore reliable ice production in select LG refrigerators by replacing worn or malfunctioning components. The kit includes essential parts such as the ice mold and ejection controls, which work together to manage water intake, freezing, and automatic dispensing of ice cubes. By maintaining consistent ice output, it supports everyday use and entertaining needs. Replacing a faulty ice maker can resolve issues such as failure to produce or dispense ice, as well as unusual operational noises. Installation involves removing the old assembly and securely fitting the new unit, ensuring proper alignment and connection to the refrigerator’s water and cooling systems. This repair enhances convenience and restores full functionality to your appliance.
Door Gasket - Gray - Left Side – Part Number: ADX73550621
$56.33
In Stock
Door Gasket - Gray - Left Side
★★★★★
★★★★★
(11)
Part #ADX73550621
This is a door gasket for the right side of various models of LG refrigerators. Door gaskets, also known as seals, are used to create a barrier between the outside ambient temperature of your home and the cool-controlled internal temperature of the refrigerator. If your refrigerator door seal is warped, cracking, or damaged in any way, it is important to replace it as soon as possible to ensure optimal cooling performance from your fridge. This is a gray-colored OEM door seal that simply needs to be wrapped carefully around the perimeter of your refrigerator door.
Micro Switch – Part Number: 6600JB3001C
$31.58
In Stock
Micro Switch
★★★★★
★★★★★
(4)
Part #6600JB3001C
This is a micro switch for various models of LG refrigerators. This switch is responsible for turning the ice dispenser on and off within the freezer compartment of the fridge. If this switch is damaged or shorted, it will cause the ice maker to work inconsistently, or not at all. This switch is different from the water dispenser switch, which has an entirely different shape all together. Replacing this switch is simple and only requires a Philips-head screwdriver to disconnect the old switch and install the new one. This switch is a genuine OEM LG part and does not come with any other parts or accessories.
Freezer Door Gasket - Gray – Part Number: MDS64172919
$73.04
In Stock
Freezer Door Gasket - Gray
★★★★★
★★★★★
(6)
Part #MDS64172919
This door gasket is used to seal the freezer door when closed.
Compressor – Part Number: TCA38151706
$492.75
Special Order
Compressor
★★★★★
★★★★★
(1)
Part #TCA38151706
This part must be installed by a licensed and trained LG technician that is able to perform a software update, which is required for the installation of this compressor. Part number CJT30000002 is needed to perform the update. Also, the three pins on the side of the new compressor may be oriented differently than the original. If different, when installing the new compressor the compressor electrical connector must be rotated 45 degrees counter-clockwise.
Refrigerator Water Reservoir – Part Number: AJL72911502
$63.64
In Stock
Refrigerator Water Reservoir
★★★★★
★★★★★
(2)
Part #AJL72911502
The water reservoir holds the water for the water dispenser as the water chills.

Questions And Answers for 79573105710

Ask our experts a question about this model and we'll get back to you as soon as possible!

Sort by:
  • 1
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Ramsarran - For model number 79573105710
April 10, 2023
They are no cooling. What could be the reason for the compressor not to energized?
Chris Boyle Profile
Hi Ramsarran, thank you for contacting us. If the compressor does not energize, we suggest you check the overload and start relay, part number PS12384295. It starts the compressor motor. We hope this sorts out your problem!
$62.60
In Stock
THERMISTOR ASSEMBLY,PTC
Was this helpful?
Thank you for voting!
Denice - For model number 79573105710
September 14, 2023
Need a water filter
Chris Boyle Profile
Hello Denice, thank you for reaching out. The water filter compatible with your model is PS12724834. If you need help placing an order, customer service is open 7 days a week!
$75.43
In Stock
Refrigerator Water Filter LT1000P
Was this helpful?
Thank you for voting!
Sherry - For model number 79573105710
May 25, 2025
Can I replace the face only to the control panel? It is scratched
Chris Boyle Profile
Hi Sherry, thank you for reaching out. If you looking for the display cover, then its part number is PS12391413. We hope that helps!
$23.60
Special Order
COVER,DISPLAY
Was this helpful?
Thank you for voting!
  • 1

Common Symptoms of the 79573105710

How this model fails, and the parts that fix it.

Watch our pros, then fix it yourself.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
replace leaking water inlet valve assembly
42 of 75 people found this instruction helpful.
  • Richard from JACKSONVILLE, FL
  • Really Easy
  • 15 - 30 mins
  • Screw drivers
1. Shut off water to refrigerator. 2. Removed bottom sheet metal cover (6 screws). 3. Removed leaking water inlet valve assembly from refrigerator (1 screw). 4. Remove water inlet tube (loosen nut) and tube back to refrigerator (pull from water valve after remove cotter pin washer). 5. Detach two electrical wire harnesses. 6. Install new water inlet valve assembly to refrigerator (1 screw). 7. Replace both water tubes to water inlet assembly. 8. Re-attach both wiring harnesses. 9. Turn water to refrigerator on. 10. Check for leaks. 11. Re-attach bottom sheet cover (6 screws).
Was this helpful?
Thank you for voting!
The factory door gasket was split and needed replacing
22 of 36 people found this instruction helpful.
  • Carl from LAKE WYLIE, SC
  • Very Easy
  • Less than 15 mins
I pulled the gasket off and installed the new one. It was very easy. All I had to do was to push the new gasket in place in the grooves in the door. The gasket I received was identical to the one I replaced.
Was this helpful?
Thank you for voting!
My nephew accidentally forced the door closed last year, which resulted in the door having to be re closed manually folding back the flap. Ugh!
25 of 46 people found this instruction helpful.
  • Tiziana from WARWICK, NY
  • Really Easy
  • Less than 15 mins
  • Nutdriver
Unscered 2 screws, unplug electrical connection under the screws, slide her flap into grooves, realign screw holes , and rescrew in. Done.
Was this helpful?
Thank you for voting!