Models
>
79573065410
79573065410 Kenmore Refrigerator - Overview
Sections of the 79573065410
[Viewing 7 of 7]
Keep searches simple, eg. "belt" or "pump".
PLATE ASSEMBLY,FRONT
PartSelect #: PS12374439
Manufacturer #: AGU75188619
This is a replacement mullion rail for your French door-style refrigerator. You will typically find the mullion rail on the left side refrigerator door. The mullion rail helps to keep the refrigerator...
$145.42
In Stock
Handle Screw
PartSelect #: PS8752913
Manufacturer #: MJB63190001
This handle screw, also known as a mounting bolt, is a mounting screw to help secure the door handle to your refrigerator door. If your handle is loose, you may just need to tighten the screw. If your...
$9.35
In Stock
FILTER ASSEMBLY,AIR CLEANER
PartSelect #: PS16222687
Manufacturer #: ADQ73214408
Refrigerator Air Filters are a key component for neutralizing odors and ensuring a fresh stream of air into your refrigerator. Swapping your old filter out for a fresh one isn’t difficult and should t...
$48.61
In Stock
Door Gasket - Gray - Right Side
PartSelect #: PS8737433
Manufacturer #: ADX73550624
This door gasket is used to make an air-tight seal for the cabinet when the door is closed
$57.10
In Stock
BASKET ASSEMBLY,DOOR
PartSelect #: PS7786027
Manufacturer #: AAP73631702
This is an OEM door shelf designed for LG refrigerators. This shelf measures 8 inches deep and 14 inches wide, is made of white and clear plastic, and hooks into the side of the door within the refrig...
$29.93
In Stock
Glass Shelf
PartSelect #: PS8737453
Manufacturer #: MHL62691504
This is the replacement shelf glass for your refrigerator. It is made of glass and is approximately 31 inches wide and 16 inches long. The shelf glass for your refrigerator slides over the crisper cov...
$46.00
In Stock
Water Inlet Valve Assembly
PartSelect #: PS3533117
Manufacturer #: AJU72992601
This includes the primary and secondary valves along with the wire harness.
$123.82
In Stock
Door Holder
PartSelect #: PS3535435
Manufacturer #: MEG61899901
This is a manufacturer-approved refrigerator door closure for your refrigerator. It is made of white plastic and measures approximately 3 inches by 2 inches. If your old closure is damaged, your refri...
$22.84
In Stock
Refrigerator Ice Maker Kit Assembly
PartSelect #: PS9865155
Manufacturer #: AEQ73110210
This wiring harness is 20 pin and 3 pin. Replacement ice maker for LG refrigerators. The ice maker assembly contains the mold to form ice and the ejection controls to fill the ice storage bin. Unplug...
$211.03
In Stock
Door Gasket - Gray - Left Side
PartSelect #: PS8749108
Manufacturer #: ADX73550621
This is a door gasket for the right side of various models of LG refrigerators. Door gaskets, also known as seals, are used to create a barrier between the outside ambient temperature of your home and...
$57.10
In Stock
Questions And Answers for 79573065410
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Sort by:
- < Prev
- 1
- Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
ALAN
February 22, 2020
Compressor and condensor are 50 degrees but unit is not working and is only 4 years old
For model number 79573065410
Hello Alan, thank you for your question. If the fridge and freezer sections are both not working (getting cold) the first parts we would recommend testing are the CAPACITOR,ELECTRIC APPLI
Part Number: PS7784536, PartSelect Number PS8751179 start relay and temperature sensor PartSelect Number: PS3636270. If those parts are ok, the issue could be with the main control board PartSelect Number PS11710600. I hope this helps.
Was this helpful?
Thank you for voting!
Related Parts:
THERMISTOR ASSEMBLY,PTC
$60.24
In Stock
Refrigerator Run Capacitor
$35.08
In Stock
SENSOR,TEMPERATURE
$20.32
In Stock
PCB ASSEMBLY,MAIN
$229.72
Special Order
- < Prev
- 1
- Next >
Common Symptoms of the 79573065410
[Viewing 7 of 7]Door won’t open or close
Fixed by
these parts
these parts
Show All
Leaking
Fixed by
these parts
these parts
Show All
Door Sweating
Fixed by
these parts
these parts
Show All
Ice maker not making ice
Fixed by
these parts
these parts
Show All
Not dispensing water
Fixed by
these parts
these parts
Show All
Ice maker won’t dispense ice
Fixed by
these parts
these parts
Show All
Fridge and Freezer are too warm
Fixed by
these parts
these parts
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
replace leaking water inlet valve assembly
1. Shut off water to refrigerator. 2. Removed bottom sheet metal cover (6 screws). 3. Removed leaking water inlet valve assembly from refrigerator (1 screw). 4. Remove water inlet tube (loosen nut) and tube back to refrigerator (pull from water valve after remove cotter pin washer). 5. Detach two electrical wire harnesses. 6. Install new
... Read more
water inlet valve assembly to refrigerator (1 screw). 7. Replace both water tubes to water inlet assembly. 8. Re-attach both wiring harnesses. 9. Turn water to refrigerator on. 10. Check for leaks. 11. Re-attach bottom sheet cover (6 screws).
Read less
Parts Used:
-
Richard from JACKSONVILLE, FL
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
28 of 47 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
My nephew accidentally forced the door closed last year, which resulted in the door having to be re closed manually folding back the flap. Ugh!
Unscered 2 screws, unplug electrical connection under the screws, slide her flap into grooves, realign screw holes , and rescrew in. Done.
Parts Used:
-
Tiziana from WARWICK, NY
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Nutdriver
23 of 36 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The factory door gasket was split and needed replacing
I pulled the gasket off and installed the new one. It was very easy. All I had to do was to push the new gasket in place in the grooves in the door. The gasket I received was identical to the one I replaced.
Parts Used:
-
Carl from LAKE WYLIE, SC
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
21 of 33 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!