EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

79572189315 Kenmore Refrigerator - Overview

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Door Bin – Part Number: AAP73252202
$81.35
In Stock
Door Bin
★★★★★
★★★★★
(26)
Part #AAP73252202
Add useful storage space inside a refrigerator door with this clear plastic door bin. It holds bottles, jars, drinks, and condiments where they are easy to see and reach. The bin measures about 13-1/2 inches wide and 4-1/4 inches high. Its shaped base is about 9-1/2 inches deep on one side and 10-1/8 inches deep on the other. Installation requires no tools. Place the bin slightly above the mounting points, then slide it down until it locks into place. Compare the size, shape, and side mounts with the original bin before ordering.
Air Cleaner Filter Assembly – Part Number: ADQ73214408
$47.40
In Stock
Air Cleaner Filter Assembly
★★★★★
★★★★★
(17)
Part #ADQ73214408
This air filter assembly is a genuine replacement part designed to improve air quality inside select LG and Kenmore Elite refrigerators. Using activated carbon, it effectively traps and neutralizes odors and airborne impurities, helping maintain a clean environment that supports longer food freshness. The filter is housed within a dedicated compartment and should be replaced approximately every six months or when indicated by the refrigerator’s filter light. Installation involves locating the filter housing, powering off the appliance, removing the old filter, and inserting the new one with proper alignment. After installation, reassemble the housing, restore power, and reset the filter indicator to ensure accurate tracking. This OEM component ensures a precise fit and optimal performance for compatible models.
Micro Switch – Part Number: 6600JB3001C
$47.25
In Stock
Micro Switch
★★★★★
★★★★★
(4)
Part #6600JB3001C
This is a micro switch for various models of LG refrigerators. This switch is responsible for turning the ice dispenser on and off within the freezer compartment of the fridge. If this switch is damaged or shorted, it will cause the ice maker to work inconsistently, or not at all. This switch is different from the water dispenser switch, which has an entirely different shape all together. Replacing this switch is simple and only requires a Philips-head screwdriver to disconnect the old switch and install the new one. This switch is a genuine OEM LG part and does not come with any other parts or accessories.
Connector,Tube – Part Number: 4932JA3009A
$36.25
Special Order
Refrigerator Water Reservoir – Part Number: AJL72911502
$65.42
In Stock
Refrigerator Water Reservoir
★★★★★
★★★★★
(2)
Part #AJL72911502
Water cools inside the refrigerator before dispensing with help from this reservoir tank assembly. The tank holds a supply of water in the fresh food compartment, allowing it to chill between uses. Cracks, punctures, or damaged connections may cause leaks inside the cabinet and interrupt delivery to the dispenser. Replacing a damaged reservoir restores the enclosed storage path for chilled water. As water leaves the tank during dispensing, incoming water replenishes the supply so it can cool before the next use. This is an OEM part sourced directly from the manufacturer.
WATER INLET VALVE – Part Number: AJU72992603
$134.87
In Stock
WATER INLET VALVE
★★★★★
★★★★★
(1)
Part #AJU72992603
Dispensing water and filling the ice maker require controlled flow through this refrigerator water inlet valve assembly. Electrically operated solenoids open the water passages when requested by the appliance controls and close them when delivery ends. A cracked or faulty valve may leak, restrict dispenser flow, or prevent the ice maker from receiving enough water. Replacing a failed assembly helps restore reliable water routing and proper shutoff between requests. It connects the incoming supply to the internal water circuits used during everyday dispensing and ice production. This is an OEM part sourced directly from the manufacturer.
Clip – Part Number: 4004JA3002A
$36.25
Special Order
Clip
★★★★★
★★★★★
(2)
Part #4004JA3002A
This water tubing clip holds the water fill tube in place in your refrigerator. The water fill tube attaches and supplies water to the ice maker/water dispenser in your fridge-freezer. If the tubing is in working order, but is hanging loose inside the unit, the issue could be that the clip meant to hold it in place is broken. If this is the case, you should look to replace the clip. This clip is made of black plastic, and is just over half an inch long. This is a genuine OEM replacement part, and is sold separately.
Refrigerator Water Filter – Part Number: AGF80300801
$85.94
In Stock
Refrigerator Water Filter
Part #AGF80300801
This refrigerator water filter and filter assembly is designed to improve the quality of drinking water and ice by reducing contaminants such as chlorine, lead, and sediment. Certified to NSF standards 42 and 53, it enhances taste and clarity while allowing beneficial minerals to pass through. Compatible with select bottom-freezer refrigerator models, this genuine replacement part should be installed using a simple twist-in method and replaced every six months or when water flow slows. After installation, flushing approximately four gallons of water ensures optimal performance and removes any residual carbon particles. Regular replacement supports consistent filtration and helps maintain the appliance’s performance.
Fan Assembly – Part Number: 5901JA1021A
$28.26
In Stock
Fan Assembly
★★★★★
★★★★★
(1)
Part #5901JA1021A
A damaged evaporator fan blade may cause ticking, buzzing, weak airflow, or uneven cooling. These problems can also come from ice buildup or a faulty fan motor, so inspect the area before ordering. This replacement blade circulates cold air inside select refrigerators. Use the complete refrigerator model number to guarantee the proper fit. Unplug the refrigerator and safely store frozen food before removing the freezer panel. If ice blocks the fan, allow it to melt fully. Do not use sharp tools or direct high heat to remove the ice. This is an OEM part sourced directly from the manufacturer.
ICE BUCKET – Part Number: AKC73369914
$212.94
Special Order
ICE BUCKET
★★★★★
★★★★★
(3)
Part #AKC73369914
This ice bucket assembly is designed to store and dispense ice within select refrigerator models. It includes both the ice bin and the auger mechanism, which rotates to push ice through the dispenser when activated. The assembly is intended to replace a damaged or malfunctioning unit, restoring full ice dispensing functionality. Measuring approximately [insert dimensions if known], it is constructed from durable, food-safe plastic and features a clear finish for easy visibility of ice levels. Installation is straightforward and typically requires no tools—simply remove the old assembly and slide the new one into place, ensuring it aligns securely with the dispenser mechanism. Before purchasing, verify compatibility with your refrigerator model to ensure a proper fit.
Defrost Sensor Assembly – Part Number: 6500JB2001B
$50.55
In Stock
Defrost Sensor Assembly
Part #6500JB2001B
Ice Water Tube Assembly – Part Number: AJR56656503
$50.55
In Stock

Common Symptoms of the 79572189315

How this model fails, and the parts that fix it.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Ice maker needed replaced
4 of 4 people found this instruction helpful.
  • Lee from BELTON, TX
  • Very Easy
  • Less than 15 mins
  • Screw drivers
Removed 4 screws then removed ice maker unit. Unplugged the old unit. Checked and verified the inlet tube was clean and not blocked. Plugged in the new unit. Placed unit into proper location and verified it was properly in place. Replaced the 4screws. Turned on the unit closed the ice door and it started making ice maybe an hour later by morning the ice bucket was full. Super easy.
Was this helpful?
Thank you for voting!
The shelf on our refrigerator was cracked so I ordered a replacement.
3 of 5 people found this instruction helpful.
  • Scott from KENT, WA
  • Very Easy
  • Less than 15 mins
Some have said that the installation took 5 minutes. Mine took less than that, and I did it with one hand. I had a beer in my other hand.
Was this helpful?
Thank you for voting!
Broken Door Basket
2 of 3 people found this instruction helpful.
  • Theodore from SACRAMENTO, CA
  • Very Easy
  • Less than 15 mins
Un-wrapped the basket......Installed with NO tools......
Was this helpful?
Thank you for voting!