79572189211 Kenmore Refrigerator - Overview

Diagrams for 79572189211

See every part. Know exactly what you need.

Diagram

Parts for the 79572189211

$18.22

Plastic Tube - 5/16 Inch

★★★★★

(24)

Part #MJU62070602

This water tube, or plastic tube, is used in refrigerators and freezers. The tube ensures water is directed to parts of the refrigerator that need it, such as the water dispenser and ice maker. If you find that your current one is leaking or broken in any way, replacing the tube can fix this problem. Make sure to unplug the appliance from...Read more

Read less

$15.00

Handle Screw

★★★★★

(8)

Part #MJB63190001

This handle screw, also known as a mounting bolt, is a mounting screw to help secure the door handle to your refrigerator door. If your handle is loose, you may just need to tighten the screw. If your screw is missing or broken, it may need to be replaced. There are multiple handle screws on your fridge, please consider ordering extra as ...Read more

Read less

$65.73

Door Shelf Bin Assembly

★★★★★

(20)

Part #AAP73252302

This door basket assembly is supplied by the original manufacturer to provide storage for various food items in refrigerators. It consists of a white plastic base and a transparent shield, measuring 14.5 inches in length and 4 inches in width. The basket is securely attached to the right side of the refrigerator and offers a compartment f...Read more

Read less

$47.40

Air Cleaner Filter Assembly

★★★★★

(5)

Part #ADQ73214408

This air filter assembly is a genuine replacement part designed to improve air quality inside select LG and Kenmore Elite refrigerators. Using activated carbon, it effectively traps and neutralizes odors and airborne impurities, helping maintain a clean environment that supports longer food freshness. The filter is housed within a dedicat...Read more

Read less

$23.60

Door Holder

★★★★★

(5)

Part #MEG61899901

This is a manufacturer-approved refrigerator door closure for your refrigerator. It is made of white plastic and measures approximately 3 inches by 2 inches. If your old closure is damaged, your refrigerator door may not open and shut properly, and therefore it should be replaced.

$15.00

Refrigerator Lever Spring

★★★★★

(1)

Part #4970JA3011K

$31.58

Micro Switch

★★★★★

(4)

Part #6600JB3001C

This is a micro switch for various models of LG refrigerators. This switch is responsible for turning the ice dispenser on and off within the freezer compartment of the fridge. If this switch is damaged or shorted, it will cause the ice maker to work inconsistently, or not at all. This switch is different from the water dispenser switch, ...Read more

Read less

$492.75

Compressor

★★★★★

(1)

Part #TCA38151706

This part must be installed by a licensed and trained LG technician that is able to perform a software update, which is required for the installation of this compressor. Part number CJT30000002 is needed to perform the update. Also, the three pins on the side of the new compressor may be oriented differently than the original. If diff...Read more

Read less

$63.64

Refrigerator Water Reservoir

★★★★★

(2)

Part #AJL72911502

The water reservoir holds the water for the water dispenser as the water chills.

$229.16

Ice Maker Assembly - 3 Wire

★★★★★

(13)

Part #AEQ73110203

NOTE: The Secondary (smaller) wire connector has 3 wires in it. If original ice maker has 6 wire connector see part number AEQ73110205. Please verify connector before ordering.

$133.72

WATER INLET VALVE

★★★★★

(1)

Part #AJU72992603

This water inlet valve in your refrigerator, also called a solenoid valve or water control valve, regulates water flow to the icemaker and dispenser. It is found at the rear of the appliance, where it connects to the household water supply line. It uses electrical solenoids to control the flow of water. It needs to be replaced when your f...Read more

Read less

$31.58

Clip

★★★★★

(2)

Part #4004JA3002A

This water tubing clip holds the water fill tube in place in your refrigerator. The water fill tube attaches and supplies water to the ice maker/water dispenser in your fridge-freezer. If the tubing is in working order, but is hanging loose inside the unit, the issue could be that the clip meant to hold it in place is broken. If this is t...Read more

Read less

Common Symptoms of the 79572189211

How this model fails, and the parts that fix it.

Leaking

Fixed by
these parts

Show All

Door won’t open or close

Ice maker won’t dispense ice

Fixed by
these parts

Show All

Ice maker not making ice

Fridge and Freezer are too warm

Fixed by
these parts

Show All

Ice maker dispenses too much ice

Repair Tips From Fixers Like You

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Water feed line running from water valve to filter housing was leaking

13 of 21 people found this instruction helpful.

Tom from EASTON, PA
Easy
30 - 60 mins
Screw drivers, Wrench (Adjustable)

Shut off water supply. Disconnect main supply line. Remove rear lower panel on back of refrigerator. Remove all tubing clamps on back. Disconnect leaking tubing from water supply valve. Remove water filter and unscrew/remove water filter housing. Replace tubing - connect to water filter housing then to water supply valve. Reconnect filter ... Read more

Read less

Was this helpful?

Fridge waterline for ice maker / door water

6 of 8 people found this instruction helpful.

Todd from MARS HILL, NC
Really Easy
Less than 15 mins
Screw drivers

The heavy work is moving the fridge, then take off the lower plans. Use a bowel or cup for screws and the water line connector spacers so you don't loos them.
undo connections holding water line, including the bottom brakes for the solenoid. Reuse the spring around the lower waterline to prevent external wear on the line.
... Read more r />NOTE: remove the waterline connector spacers and save!
NOTE: you must compress (not pull) the connect to then pull the waterline out of the connectors.
NOTE: You must also remove the water filter and housing inside the fridge but this is easy.
MOTE: Test the line for leaks by turning on the water and then using the door water. The filter will need to refill so it may take a minute before water comes up. This line only have pressure when the door water is used or the ice maker needs to make ice.

After replacing the line, test the line for leaks by using the door water so the solenoid fills the lines
Read less

Was this helpful?

Thank you for voting!

Changing out the Ice Maker tube

9 of 19 people found this instruction helpful.

HARRY from SPARKS, NV

Really Easy

15 - 30 mins

Screw drivers, Wrench (Adjustable)

An easy way to get a refrigerator out from the wall is to use a tow strap or 1/2 to 3/4 in. rope. Throw a loop behind refer while keeping both ends in your hands. Let it settle down to the lower half of unit and pull using both hands. Comes right out.
Remove lower panel. Unscrew water valve from cabinet. Remove all tube holders L ... Read more ay some rags down to catch a little water drainage.
Turn off water supply valve at wall. Unplug Power. Remove filter and filter holder. (one screw).
remove tube from valve by removing plastic C clip. Push plastic ring towards the valve and pull out tube at same time.
With the tube free, remove filter, then mount screw to remove the inside filter holder. When it is out, pull the tube doing the same process as the lower end. Pull tube out and replace with new one putting everything back in reverse order.
Before placing tube holders back on, turn on water to check for leaks.
After turning water back on and plugging in power, push refer back into place.
While I was there, I also replaced the hose from the wall to the refer.
Read less

Was this helpful?

Thank you for voting!

View More