This door shelf bin, also known as a door basket, is made to store things, like bottles and jars, in your fridge. It is a clear shelf that fits across your fridge door, easily hooking into place. It measures around 27 inches in length and 5 inches in both width and height. Please note that this genuine OEM replacement part is sold individually. Check how many you will need before making your purchase.
This is a shelf assembly for various models of LG refrigerators. This assembly features the glass pane and outer plastic frame together as one. If the plastic or glass portion of your refrigerator shelf have cracked or are damaged, they will need to be replaced immediately to ensure food items are supported properly. This shelf measures a...Read morepproximately 29 inches wide and 19.5 inches deep, and can be replaced by simply sliding out the old one and sliding in the new one.
This refrigerator door hinge bushing is a durable white plastic component that provides a smooth pivot point for the hinge pin, helping keep the door properly aligned and sealed. It is commonly used to correct doors that sag, make noise, or are difficult to open or close due to a worn or damaged bushing. The bushing installs at the door h...Read moreinge pivot point and typically requires removing the hinge bracket with a 10?mm socket. Color is white, and size and dimensions may vary by refrigerator model.
This is a door bin that is compatible with various models of LG refrigerators. This door bin measures approximately 29 inches long and 3.5 inches tall and is made of clear plastic. If this bin in your refrigerator door is broken, chipped, or damaged in any way and unable to support food items, it needs to be replaced immediately. This doo...Read morer bin is an OEM part that is sold individually, so depending on your model of refrigerator, you may need more than one of this door bin, so consider that before ordering.
This freezer door gasket assembly creates an airtight seal around the door to maintain a stable internal temperature, improve energy efficiency, and prevent frost buildup. Designed as a replacement for worn or damaged gaskets, it helps reduce condensation and ensures food stays properly chilled. For easier installation, warm the gasket wi...Read moreth a hair dryer on a low setting or soak it in warm water to remove any creases before fitting it securely into place.
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
old bushing worn and broken
23 of 43 peoplefound this instruction helpful.
Jerry from CORSICANA, TX
Really Easy
30 - 60 mins
Screw drivers, Socket set
removed the upper freezer door to access screws to remove lower door. laid bottom door on its side, removed bad bushing, put new bushing in, put bottom door back on refridge, put upper door back on fridge. Door worked easy as when new. good closure of door and story..Happy customer, and wife even happier.....thank you....
Was this helpful?
Thank you for voting!
bottom door dropped slightly and bottom hinge area rubbing on steel door support
12 of 27 peoplefound this instruction helpful.
Louis from PHILADELPHIA, PA
Really Easy
30 - 60 mins
Screw drivers, Socket set, Wrench set
removed 3 fasteners for top door and placed freezer door aside, then removed 3 more fasteners on bottom refrigerator door and place that aside. replaced bushing on lower door bracket and reversed the above procedure to reinstall doors.
Was this helpful?
Thank you for voting!
Replacing the middle door shelf on the refrigerator door
6 of 10 peoplefound this instruction helpful.
RUSTY from Phoenix, AZ
Really Easy
30 - 60 mins
Extremely easy. Open the refrigerator door, remove all food items from the damaged door shelf and set them aside. Remove the divider by prying the back curved grip from the back wall of the shelf. Bump the bottom of the shelf with your hand in an upward motion until the shelf is dislodged from its mounting points. Remove the damaged d
... Read moreoor shelf and install the replacement shell by aligning the door mounting points with the groves built into the door shelf and press downward until the shelf is locked into place. Replace the divider and all the food items removed. Shut the door and you're done