Opening the refrigerator door releases this push-button switch to turn on the interior light, making stored food easier to see. When the door closes, it presses the button and turns the light off. A stuck, worn, or broken switch may leave the light off when the door is open or keep it on after closing. Replacing a faulty switch helps rest...Read moreore normal lighting control and reliable response to door movement. Disconnect the refrigerator from power before removing or installing the switch. This is an OEM part sourced directly from the manufacturer.
This lower holder cover is also known as a toe grille clip, or a kickplate clip. It is designed for use with refrigerators. The main purpose of this part is to hold the molding at the base of your refrigerator in place, it also makes removing the piece of molding simple. If you notice that the kickplate on your appliance is loose or will ...Read morenot stay in place you may need to replace one or more of these clips. This part is made of plastic, and it is sold individually.
This white crisper drawer cover is a genuine replacement component designed for LG and Kenmore refrigerators. Constructed from durable plastic, it serves as both a support frame for the crisper drawer and a shelf surface above it, helping to maintain optimal humidity levels for fresh produce. The design includes integrated rail brackets t...Read morehat allow the drawer to slide smoothly, along with raised edges to help contain spills. This assembly includes only the frame and does not come with the glass shelf insert. For certain models, the original glass may be too large for this frame; in such cases, a compatible glass insert may be required. Compatibility spans a wide range of LG and Kenmore refrigerator models. Sold individually.
This compressor start relay and thermistor assembly helps start the refrigerator's compressor and protects it from overheating during operation. It provides the electrical boost needed to get the compressor running, which is essential for maintaining proper cooling inside the refrigerator. If the refrigerator is not cooling properly, the ...Read morecompressor is not starting, or you hear repeated clicking noises, a faulty relay assembly may be the cause. Replacing this part can help restore reliable compressor operation and keep the refrigerator cooling as intended.
This part is a replacement light socket for your refrigerator. This model is white in color, and it has two sockets that will fit two separate light bulbs. The light socket connects to the power source, and the light bulb is screwed into it. If the light in your refrigerator is not working when you open the door, you could have a faulty s...Read moreocket. It is important to determine if the light bulbs are simply burned out, or if the socket is causing the issue. Be sure to disconnect your refrigerator from the power source before you begin this repair. This is an OEM part sourced directly from the manufacturer.
This part is a temperature sensing devise. It senses the rise in evaporator temperature during a defrost cycle and cycles the defrost heater off after all frost is melted. It is calibrated to permit a defrost cycle only when the temperature is below a preset temperature.
This genuine freezer door gasket assembly is designed to create a secure, airtight seal around the freezer compartment, helping maintain consistent internal temperatures and energy-efficient operation. Made from durable rubber, it compresses when the door is closed to prevent cold air from escaping and warm air from entering. A worn or da...Read moremaged gasket can lead to temperature fluctuations, increased energy use, and reduced food preservation. Replacing the gasket restores proper insulation and helps the appliance operate more efficiently. Installation is straightforward for DIYers. Simply unplug the refrigerator, remove the old gasket, and press the new one into place, ensuring a snug and even fit. This OEM part is engineered for compatibility with select bottom-freezer models. Always confirm your appliance’s model number before purchasing to ensure a proper fit.
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Remove and replace light switch
45 of 91 peoplefound this instruction helpful.
Debbie from Waltham, MA
A Bit Difficult
30 - 60 mins
Pliers, Screw drivers
Video makes it look easy. Kenmore refrigerator does not have "groove" along the right hand side of switch that allows for pushing down on release. Used a thin screwdriver to get under to push while holding switch edge with pliers. Kept slipping. Tape sides to avoid scratching inside of refrigerator.
Was this helpful?
Thank you for voting!
Zero help
9 of 9 peoplefound this instruction helpful.
Janet from LEXINGTON, MA
Very Difficult
1- 2 hours
No one returned emails and no one will answer the phone. Would not buy again from PartSelect. Couldnt do the simple repair without the correct part. Check return policy and shipping. Shipping rate is HIGH. No guarantee they will accept return.