This part must be installed by a licensed and trained LG technician that is able to perform a software update, which is required for the installation of this compressor. Part number CJT30000002 is needed to perform the update.
Also, the three pins on the side of the new compressor may be oriented differently than the original. If diff...Read moreerent, when installing the new compressor the compressor electrical connector must be rotated 45 degrees counter-clockwise.
This handle screw, also known as a mounting screw is designed for LG fridge door handles. It Is responsible for securing the handle to the fridge door and ensuring that it remains firmly attached. A secure door handle allows you to easily open and close the refrigerator as needed. Over time the screw may break, become corroded, or the thr...Read moreeads may wear down. If this happens, the handle may become loose or wobbly, or detach completely from the door. It is recommended to replace the handle screw if it is no longer in good working condition in order to avoid potential damage to the door panel. Each handle screw is sold individually.
Keep ice dispensing smoothly with this refrigerator ice chute door motor. It opens the chute door when you request ice and closes it afterward to help keep cold air inside. A failed motor may leave the door stuck shut, blocking ice, or stuck open, allowing warm air into the chute. This can lead to frost buildup, condensation, or melting i...Read morece that clumps together. Replacing a faulty motor helps restore proper door movement and closure. Unplug the refrigerator before working on the dispenser. This is an OEM part sourced directly from the manufacturer.
Defrost water flows to the drain pan through the refrigerators drain tube assembly. Confirm this OEM part matches your refrigerators model number. Unplug the refrigerator and wear work gloves before installation.
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Noise coming from refrigerator
3 of 5 peoplefound this instruction helpful.
Herb from YUMA, AZ
Very Easy
30 - 60 mins
Screw drivers, Wrench (Adjustable)
Opened the back and noticed a fan blade off making the motor unbalanced. Ordered a new fan and motor and went to (you tube ) that explained the whole procedure. Couldn’t get any easier.
Was this helpful?
Thank you for voting!
Right side door creaky squeaky annoying
3 of 5 peoplefound this instruction helpful.
Chris from MURFREESBORO, TN
Easy
30 - 60 mins
Screw drivers, Wrench (Adjustable)
Took off door per normal instructions. Removed the old stopper and hinge assembly (the hard rubbery parts had worn enough against each other to cause the annoying sound when opening and closing the door). Inserted the new stopper and hinge assembly. There was no locking nut on the newer part, so just had to level the fridge
... Read more door without that part of the instructions (from normal LG instructions) Overall easy for a non-handy person and the annoying sound is gone. Wife is happier now.
Removed ice dispenser and display with small screwdriver from front of the fridge. Pried out the whole piece slowly. This exposed the motor that activates the chute. Plugged in the new motor before any removal to verify the motor was the problem. When it worked, removed old and installed new. 3 screws. Piece of cake.