This handle screw, also known as a mounting bolt, is a mounting screw to help secure the door handle to your refrigerator door. If your handle is loose, you may just need to tighten the screw. If your screw is missing or broken, it may need to be replaced. There are multiple handle screws on your fridge, please consider ordering extra as ...Read morethey commonly wear at the same rate. This is about 1 inch long and metallic in color.
This genuine OEM door basket, also known as a bin, rack, or tray, offers additional storage on your refrigerator door for items like bottles, jars, and condiments. It is white and designed to be mounted on the inside of the door. You should replace the basket when it becomes damaged or cracked as it may no longer securely hold items, whic...Read moreh could potentially lead to spills when you open the door. It is important to keep in mind that this basket is sold individually, so it is advisable to check how many you will need based on your refrigerator model.
This genuine OEM lever spring exerts tension between the ice maker door plunger and the ice maker itself on your refrigerator. If there is little to no tension holding your ice door seal in place, the spring may be faulty. This spring is approximately 1-inch long. Remember to disconnect the power to your refrigerator before beginning this repair.
This part must be installed by a licensed and trained LG technician that is able to perform a software update, which is required for the installation of this compressor. Part number CJT30000002 is needed to perform the update.
Also, the three pins on the side of the new compressor may be oriented differently than the original. If diff...Read moreerent, when installing the new compressor the compressor electrical connector must be rotated 45 degrees counter-clockwise.
This fan assembly circulates air to support cooling or ventilation functions. Designed for reliable airflow, it helps maintain consistent temperatures and efficient operation.
This handle screw, also known as a mounting screw is designed for LG fridge door handles. It Is responsible for securing the handle to the fridge door and ensuring that it remains firmly attached. A secure door handle allows you to easily open and close the refrigerator as needed. Over time the screw may break, become corroded, or the thr...Read moreeads may wear down. If this happens, the handle may become loose or wobbly, or detach completely from the door. It is recommended to replace the handle screw if it is no longer in good working condition in order to avoid potential damage to the door panel. Each handle screw is sold individually.
Ask our experts a question about this model and we'll get back to you as soon as possible!
We may have answered a similar question already! Search questions and answers left by others using simple keywords like "fit", "broken", "easy", or "quality" to find questions that match.
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Sort by:
Prev
1
Next
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Thomas Williams - For model number 79551813410
December 12, 2019
Why after being unplugged for some hours and plug back in, it gets cold but after running for some time, it warms up and stop cooling until i unplug it again for some hours?
Hello Thomas, thank you for writing. This sounds like a faulty Capacitor, part number PS11710162 for your model refrigerator. Good luck with your repair!
1 personfound this instruction helpful.
Was this helpful?
Thank you for voting!
Kevin - For model number 79551813410
December 13, 2022
what is the model number for the automatic ice maker that works with this refrigerator
Hi Kevin,
Thank you for your question. The part number listed under your model number for the ice maker assembly kit is PS11706461. If you need help placing an order for it, customer service is open 7 days a week and anyone will be happy to assist you. Please feel free to give us a call. We look forward to hearing from you!
Was this helpful?
Thank you for voting!
Maurice - For model number 795 51813 410
July 15, 2026
when i push the ice/water dispenser nothing happens, but sometimes when i push half way it works
Hi Maurice, thank you for getting in touch. We would suggest checking the dispenser lever, part number PS3629133. The plastic pivot points behind the paddle may be bent, cracked, or worn down, preventing it from depressing fully. You may need to replace it to fix the issue. We hope this sorts out your problem!
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Right side door creaky squeaky annoying
3 of 5 peoplefound this instruction helpful.
Chris from MURFREESBORO, TN
Easy
30 - 60 mins
Screw drivers, Wrench (Adjustable)
Took off door per normal instructions. Removed the old stopper and hinge assembly (the hard rubbery parts had worn enough against each other to cause the annoying sound when opening and closing the door). Inserted the new stopper and hinge assembly. There was no locking nut on the newer part, so just had to level the fridge
... Read more door without that part of the instructions (from normal LG instructions) Overall easy for a non-handy person and the annoying sound is gone. Wife is happier now.
I paid for the expedited shipping and they sent me a cheap knockoff attempt at the part that had the wrong size hole. So they refunded me the money I paid for the part but not the shipping, and then I crushed the part they sent me with a hammer and threw it away.
Was this helpful?
Thank you for voting!
Ice chute would not open.
18 of 54 peoplefound this instruction helpful.
Steve from MUKWONAGO, WI
Easy
30 - 60 mins
Screw drivers
Removed ice dispenser and display with small screwdriver from front of the fridge. Pried out the whole piece slowly. This exposed the motor that activates the chute. Plugged in the new motor before any removal to verify the motor was the problem. When it worked, removed old and installed new. 3 screws. Piece of cake.