EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

79551029010 Kenmore Refrigerator - Overview

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Handle Screw – Part Number: MJB63190001
$15.00
In Stock
Handle Screw
★★★★★
★★★★★
(8)
Part #MJB63190001
This handle screw, also known as a mounting bolt, is a mounting screw to help secure the door handle to your refrigerator door. If your handle is loose, you may just need to tighten the screw. If your screw is missing or broken, it may need to be replaced. There are multiple handle screws on your fridge, please consider ordering extra as they commonly wear at the same rate. This is about 1 inch long and metallic in color.
Guide Rail - Right Side – Part Number: MEA40002601
$51.61
In Stock
Guide Rail - Right Side
★★★★★
★★★★★
(18)
Part #MEA40002601
This is an authentic OEM part sourced directly from the manufacturer. The crisper slide rail for your refrigerator allows the crisper drawer to slide in and out, and supports the drawer as it does so. This part is for the right side of your crisper drawer. Please note that the roller for this guide rail is a separate part under part number PS11759956.
Push Button Switch – Part Number: 6600JB3007E
$37.54
Special Order
Push Button Switch
★★★★★
★★★★★
(5)
Part #6600JB3007E
This is a genuine replacement switch. It is a push button style switch that is designed for use in your refrigerator. When the door of your appliance is opened the switch is released, and the light comes on. When you close the door the switch is pressed in, and the light turns off. You may need a putty knife to remove your old switch.
Guide,Rail – Part Number: 4974JA1105B
No Longer Available
Water Inlet Valve Assembly – Part Number: 5221JA2006D
$127.64
In Stock
Water Inlet Valve Assembly
★★★★★
★★★★★
(5)
Part #5221JA2006D
This water inlet valve has three solenoid valves and push in fittings. When energized this part releases water from the supply line into the ice mold.
Lever Spring – Part Number: 4970JA3011C
$15.00
In Stock
Lever Spring
★★★★★
★★★★★
(1)
Part #4970JA3011C
This genuine OEM lever spring exerts tension between the ice maker door plunger and the ice maker itself on your refrigerator. If there is little to no tension holding your ice door seal in place, the spring may be faulty. This spring is approximately 1-inch long. Remember to disconnect the power to your refrigerator before beginning this repair.
Light Bulb – Part Number: 6912JB2004M
No Longer Available
Refrigerator Water Tube Fitting – Part Number: 4932JA3002A
$31.58
In Stock
Refrigerator Water Tube Fitting
★★★★★
★★★★★
(2)
Part #4932JA3002A
The water tube fitting connects lines that supply water to components such as the ice maker and water dispenser.
Refrigerator Door Basket – Part Number: MAN61844601
$101.29
In Stock
Refrigerator Inlet Tube – Part Number: 5040JA2015A
$34.74
In Stock
Water Filter – Part Number: 5231JA2002A
No Longer Available
Water Filter
Part #5231JA2002A
Filters water without removing minerals that are of value to your health, such as fluoride. Lessens the presence of iron, dirt, and rust, among other impurities. This filter needs to be replaced every six months or 500 gallons. It measures 5.6 inches high and 3.3 inches in diameter. To replace, first remove the old filter, which can be accessed by removing the top shelf. Pull it down and turn counter-clockwise to remove. Take your new filter and check to make sure the tabs are in the horizontal position. Now push it into the compartment and rotate it until it is secure. To remove trapped air, run 2.5 gallons of water through the system in cycles of 30 seconds on and 60 second off. If your model has an indicator on the display, push and hold the Filter or Reset button for about 5 seconds to reset.

Manuals & Care Guides for 79551029010

Click to download

Questions And Answers for 79551029010

Ask our experts a question about this model and we'll get back to you as soon as possible!

Sort by:
  • 1
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Mitch - For model number 79551029010
October 23, 2024
795.51029.010 ice maker tray looks uneven and when filling the water is flowing over the left front side of tray. is there an adjustment? Refrigerator is perfectly level.
Chris Boyle Profile
Hello Mitch, Thank you for writing. If the Ice maker is sitting level, this could be an indication the Ice Maker or the Ice Maker tray is faulty and the Ice Maker needs to be replaced. Good luck with the repair!
$252.09
In Stock
Ice Maker Assembly
Was this helpful?
Thank you for voting!
  • 1

Common Symptoms of the 79551029010

How this model fails, and the parts that fix it.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Broken Guide Rail
4 of 6 people found this instruction helpful.
  • Nicole from BROOKSVILLE, FL
  • Very Easy
  • Less than 15 mins
  • Screw drivers
This site was awesome! I was able to very quickly look up my refrigerator model, find the proper part number, and order the part. The only suggestion I would make is to update the cut sheet with a more clear version, it was a little difficult to make out the part number because the scan/drawing was fuzzy, but I was still able to make it out. Got the part in the mail very quickly and it was super easy to remove the old rail and install the new one. Take out the screws from the old one, remove the old rail, line up the holes, install the new one, and put back the screws. It's so nice to have a site like this to fine parts and order them! Too cool! Thank you so much!
Was this helpful?
Thank you for voting!
Brocken rails
3 of 4 people found this instruction helpful.
  • Jose from PHOENIX, AZ
  • Very Easy
  • Less than 15 mins
Very easy to replace right and left rail 3 screws on each side
Was this helpful?
Thank you for voting!
whater valve whith a defected selenoid and water leaks.
2 of 2 people found this instruction helpful.
  • Albert from NORTHRIDGE, CA
  • Really Easy
  • 30 - 60 mins
  • Screw drivers, Socket set, Wrench set
First ,I unplug the refrigerator .
2nd i remove the back cover, clean the dust.
3th disconnect the water line, remove the all valve..
4th unplug all the wires and code ea with a No,remove the water lines
5th replace the valve reconnect the wires and water lines.replace the
back cover at last screw back the w ater line.check for water leaks .
i found ease the valve replacement installation.
.Thanks for the video.
Was this helpful?
Thank you for voting!