This handle screw, also known as a mounting bolt, is a mounting screw to help secure the door handle to your refrigerator door. If your handle is loose, you may just need to tighten the screw. If your screw is missing or broken, it may need to be replaced. There are multiple handle screws on your fridge, please consider ordering extra as ...Read morethey commonly wear at the same rate. This is about 1 inch long and metallic in color.
This is an authentic OEM part sourced directly from the manufacturer. The crisper slide rail for your refrigerator allows the crisper drawer to slide in and out, and supports the drawer as it does so. This part is for the right side of your crisper drawer. Please note that the roller for this guide rail is a separate part under part number PS11759956.
This genuine OEM lever spring exerts tension between the ice maker door plunger and the ice maker itself on your refrigerator. If there is little to no tension holding your ice door seal in place, the spring may be faulty. This spring is approximately 1-inch long. Remember to disconnect the power to your refrigerator before beginning this repair.
Filters water without removing minerals that are of value to your health, such as fluoride. Lessens the presence of iron, dirt, and rust, among other impurities. This filter needs to be replaced every six months or 500 gallons. It measures 5.6 inches high and 3.3 inches in diameter. To replace, first remove the old filter, which can be ac...Read morecessed by removing the top shelf. Pull it down and turn counter-clockwise to remove. Take your new filter and check to make sure the tabs are in the horizontal position. Now push it into the compartment and rotate it until it is secure. To remove trapped air, run 2.5 gallons of water through the system in cycles of 30 seconds on and 60 second off. If your model has an indicator on the display, push and hold the Filter or Reset button for about 5 seconds to reset.
Ask our experts a question about this model and we'll get back to you as soon as possible!
We may have answered a similar question already! Search questions and answers left by others using simple keywords like "fit", "broken", "easy", or "quality" to find questions that match.
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Sort by:
Prev
1
Next
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Kristin - For model number 79551022012
June 13, 2025
Water and ice have floaters. Changing refrigerator filter did not help. What parts do I need to replace to get clear clean water?
Hello Kristin, thank you for reaching out. Inspect the water tubes or lines that connect the filter to the ice maker and water dispenser. If they're clogged, kinked, or damaged, they might be introducing debris into the water system. If that does not help, we would suggest checking the water inlet valve, part number PS3527457. This valve supplies water to the water dispenser and ice maker. If it's clogged or faulty, it can cause floaters in the water and ice. Replacing the water inlet valve may resolve the issue. We hope this solves your problem!
my ice maker is making too much ice. the little ice flap wont close causing too much moisture in the freezer. the water outlet is very slow. is there a monitor switch that controls one or more of these?
Hello Vicki, thank you for the question. Based on our understanding, there is no monitor switch in your model for the ice maker, the issue is most probably with the ice maker assembly, part number PS3528732. You may need to replace the ice maker to fix the issue. We hope this solves your problem!
Hello Donald, thank you for contacting us. Based on the description that you have provided, we would recommend checking the temperature sensor, part number PS3598284, to fix the issue. We hope this solves your problem!
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Broken Guide Rail
4 of 6 peoplefound this instruction helpful.
Nicole from BROOKSVILLE, FL
Very Easy
Less than 15 mins
Screw drivers
This site was awesome! I was able to very quickly look up my refrigerator model, find the proper part number, and order the part. The only suggestion I would make is to update the cut sheet with a more clear version, it was a little difficult to make out the part number because the scan/drawing was fuzzy, but I was still able to make it
... Read moreout. Got the part in the mail very quickly and it was super easy to remove the old rail and install the new one. Take out the screws from the old one, remove the old rail, line up the holes, install the new one, and put back the screws. It's so nice to have a site like this to fine parts and order them! Too cool! Thank you so much!
Read less
Was this helpful?
Thank you for voting!
Brocken rails
3 of 4 peoplefound this instruction helpful.
Jose from PHOENIX, AZ
Very Easy
Less than 15 mins
Very easy to replace right and left rail 3 screws on each side
whater valve whith a defected selenoid and water leaks.
2 of 2 peoplefound this instruction helpful.
Albert from NORTHRIDGE, CA
Really Easy
30 - 60 mins
Screw drivers, Socket set, Wrench set
First ,I unplug the refrigerator . 2nd i remove the back cover, clean the dust. 3th disconnect the water line, remove the all valve.. 4th unplug all the wires and code ea with a No,remove the water lines 5th replace the valve reconnect the wires and water lines.replace the back cover at last screw back the w
... Read moreater line.check for water leaks . i found ease the valve replacement installation. .Thanks for the video.
My Orders
