7951 - Overview

A washer is used for things such as load distribution, stability, alignment and protection for whatever equipment it is fastened between. This curved washer, also known as a wave washer or spring washer, is made of metal and features a curved design that allows for applications in settings where objects being fastened together are also cu...Read morerved or to exert a continuous level of tension. This washer measures approximately 1-inch in outer diameter and 1/3-inch inner-diameter and is compatible with and used on equipment like snowblowers, chainsaws and lawnmowers. This washer is installed between a round fastener or knob to better secure them together and if you notice that where the washer is normally connected is loose or vibrates excessively, this washer likely needs replacing. Depending on your model the replacement process may appear different, but it is just as simple as placing the washer between two things that are connected and securing them tightly.

This genuine OEM oil filter helps to remove harmful contaminants from engine oil. It is designed for a variety of Engines. It is sold Individually. This part maintains optimum performance of your engine in accordance with applicable EPA emissions regulations. It is recommended to replace an Oil Filter at least once a season.

This ignition key is used in lawn equipment to start and stop its engine. Inserting the key into the ignition switch activates the starter motor. Thus, it is a safety device which prevents accidental or unauthorized use of the equipment. A broken key might be loose or hard to turn. In some cases, it might have completely fallen out of the...Read more switch. Without the ignition key, it will be difficult or impossible to start the engine. Locate your ignition key by reading your user manual. To remove a stuck ignition key, you may need to use a small amount of lubricant on it. While turning the key in the ignition switch, gently wriggle it back and forth. There may also be a release button that you could press, depending on your model type. This replacement part is an OEM product and is sold per unit.

This replacement push rod is specially designed for Kohler engines commonly installed on a variety of lawn and garden equipment. It is an authentic high-quality item that is sourced from the original equipment manufacturer. The rod is attached to the camshaft to push the exhaust valve open during the exhaust stroke. A bent pushrod can not...Read more only affect your engine\\\'s performance, but it can also seriously damage other parts if the problem is not taken care of immediately. Make sure to check the diagrams of your model for the exact location and the correct installation of this part. It is made of durable metal and is sold individually. You will need a screwdriver and a wrench set to take the engine apart in order to perform this repair.

This oil seal is a genuine OEM replacement part designed for lawn and garden equipment. It is a small, circular rubber seal with a diameter of 2 3/8 inches, used to prevent oil leakage between the gear cover and gear shaft, and prevent the entry of contaminants. You will need to replace this oil seal if it is brittle, cracked, or has lost...Read more elasticity. A faulty seal will cause the gears to lose lubrication, increase friction damage, and prematurely wear down the parts. Remember to drain the oil from your equipment before beginning any repairs. Carefully pry the old seal from its mounting position and clear off any debris and residue on the area. Place the new seal in position and ensure it is securely fitted.

It is a genuine Kohler item that is supplied by the original equipment manufacturer for use with engines that are commonly installed on a variety of lawn and garden equipment. This is an identical replacement for a faulty or a missing hardware that was installed on a new unit. To ensure the proper repair procedure, refer to the appropriat...Read moree diagrams for your model. Keep in mind this high-quality part is made of durable metal and is sold as an individual item. A wrench set will be needed to replace it.

Kohler Original Equipment 52 050 02-S Pro Performance Oil Filter. For optimum performance, we recommend changing the oil in your small engine after the first five hours of use. After that, change the oil on a yearly basis or after every 50 hours of use (whichever comes first).

This OEM part is sold individually and is a direct replacement part sourced from the manufacturer. The Woodruff Key is used to allow mating parts such as a shaft and gear to rotate together. It is made of silver-colored metal and is found in various locations, depending on your model. This part will wear over time and needs to be replace...Read mored when damaged, worn, or if the mating parts no longer rotate together. Customers rate this repair as Easy.

This screw is an authentic OEM sourced hardware, it is not an aftermarket imitation. It is commonly utilized on Toro snow throwers. It is a standard hardware which has multiple uses depending on your unit, please make sure to check appropriate diagrams for correct location and use of this hardware. One hex head screw is included per order.

Made of durable black rubber, this Oil Seal is an authentic OEM part for use in over 150 models of small engines. This part is sold individually, not as part of a kit or assembly. It will be found on the crankcase opening, where the crankshaft is. The Seal should be replaced when it becomes worn or damaged. When it malfunctions, you'll s...Read moreee oil visibly leaking. To complete this repair, you will need a screwdriver, pliers, a socket set, a wrench set, a nut driver, and an impact wrench. Customers rated the difficulty of this repair as Expert.

This authentic manufacturer-sourced gasket kit is made for use with Kohler engines commonly installed on a variety of lawn and garden equipment. The parts in this kit are utilized to ensure a tight fit between the cylinder and the cylinder head. Over time gaskets may wear out and begin to crack eventually requiring replacements. For the e...Read morexact locations and the correct installation of the new components, please refer to the appropriate diagrams of your model. This high-quality kit includes the head gasket, the intake port o-rings, the muffler gaskets, the intake manifold gaskets, the head bolt washers, the head bolt nuts and the installation instructions. You will need a wrench set to take the engine apart when performing this repair.