79359 MTD Tiller - Overview

This is an original replacement part sourced directly from the manufacturer. The screw is commonly found in yard equipment from Craftsman, such as lawn tractors, snow blowers, and edgers. This part is made of metal, and may be found in various locations in the machine, depending on model. Please be aware that there are different screws...Read more used in the machine. Refer to the parts diagram to be sure of ordering the correct part. You will require a wrench when replacing this item. The screw is sold as an individual replacement part.

The Jamlock Nut is a 3/8-16 inch metal nut which can be installed using a socket or wrench set. It's used to secure and lock parts in place. If the part is damaged and comes loose it should be replaced. This is an authentic part authorized by the manufacturer.

This silver metal lock washer helps prevent the nut on the drive belt pulley shaft from backing off during operation, it has a 5/16-inch inner diameter and a 1/2-inch outer diameter. one washer is included, replace it if fatigue or damage allows the connected shafts to spin freely, verify fit using the equipment model or owner manual

The air valve attaches to the wheel and is made of a durable material. This is a genuine MTD, Ryobi, Yard Machines, Bolens, Troy-Bilt, and Yard Man part sourced directly from the manufacturer for use in chippers, shredders, cultivators, edgers, lawn tractors, snowblowers, and trimmers. Keep in mind that this part is sold individually. Whe...Read moren replacing this item a set of pliers might be required during the installation process. It might wear out over time and will need replacing.

This ball bearing is an authentic replacement part used in outdoor power equipment. It has an outer diameter of 1.575 inches and features a retaining ring to secure it in place. It is also double sealed to maintain lubrication and provide additional protection. The ball bearing is responsible for reducing friction between moving parts and...Read more ensuring smooth rotation. If the ball bearing is worn down, damaged or inadequately lubricated, it can result in damage to the equipment parts, overheating, excessive noise, and decreased power during operation. A faulty bearing should be replaced promptly to ensure the longevity of your equipment. Remove the faulty bearing using a bearing puller and clean the mating surface thoroughly. Place the new bearing in position and apply steady pressure using press tools or a bearing installer to secure it in place.

This screw is a high quality hardware that is specially manufactured for use on MTD and Yard Machines lawn and garden equipment. It is an authentic part that has multiple uses depending on the equipment. Make sure to check appropriate diagrams for correct location and applications of this screw. Please note, one hex head screw is included per order that will require a wrench to install or remove it.

This is a genuine OEM sourced replacement part that is intended to be used with lawnmowers, snowthrowers, and tillers from Bolens, Ryobi, Yard Machines, MTD, Troy-Bilt, and Yard-Man. The sealed bearing is used to limit friction between a rotating shaft and a fixed part assembly. It is recommended to review your models illustrated part dia...Read moregram to confirm the bearing\\\'s compatibility. This item is sold as an individual replacement part.

This Bell-Wash Flat Washer is an OEM part that measures .40 inches I.D. x 88 inches O.D. This washer is a silver, metal, washer sold individually. This part is rated as Easy to install by customers. If missing or damaged (likely due to fatigue) it should be replaced. Refer to your owners manual to ensure this is the correct part for you.

This T-knob, is a manufacturer-approved replacement part for use in tillers and lawn tractors. It is a T-shaped handle used in a variety of applications, such as adjusting the equipment RPMs (revolutions per minute) or it can be attached to the depth bar and used to control the depth that the tines or blades penetrate the soil, for tasks ...Read moresuch as tilling soil or cutting grass. However, if the threads on the bolt wear out or the plastic body of the knob becomes damaged, you will not be able to control your equipment using the knob. A faulty T-knob may result in inconsistent speed, inaccurate depth settings, uneven tilling, or inefficient grass cutting. Remove the fasteners that secure the t-knob and pull it off the equipment. It is recommended to replace the fasteners at the same, especially if they are worn down or damaged. Place the new T-knob in position and secure it with the fasteners

This authentic manufacturer-sourced component is specially designed for use on lawn and garden equipment. It is an identical replacement for a missing or a damaged hardware that was installed on a new unit. Make sure to refer to the diagrams for your specific model for the exact location and the correct application of this screw. Keep in ...Read moremind this high-quality product is made of durable metal and is sold as an individual item. A wrench will be needed to secure or remove it.