79097993410 Kenmore Range - Overview

Sold Individually.

This OEM-manufactured metal temperature sensor, or oven probe, measures and regulates the temperature within the oven. If you find that your food is being overcooked, undercooked, or is not cooking evenly, the sensor may be faulty. You can verify this by testing it with a multimeter or looking out for an error code on the control board. I...Read moref you do not replace the broken sensor, your oven will run too hot or too cold. To replace the sensor, you first need to turn off the power to the oven and let it cool down. Access the probe inside the oven cavity, it is commonly attached to the rear wall. Using a screwdriver or pliers, remove any screws or clips that are securing the sensor in position. You may also need to unscrew or unclip the wire attached to the probe from the back of the oven. This sensor is sold as a single unit.

Sold Individually. Pan Head Screw - 8-18ab X 0.375

This part controls your warming drawer element.

This part is made of stainless steel and is approximately half an inch in diameter. This nut is known as a control mounting hex nut. It is metallic in color. This is an OEM part sourced directly from the manufacturer. This part is sold individually. This nut screws in as opposed to other nuts which can be snapped into place. Many of our c...Read moreustomers have rated this repair as easy. This product is designed mainly for use in a range/cooktop/oven.

This halogen lamp assembly in your oven illuminates the cavity and is often located near the back wall or on the ceiling, so that you can easily monitor the cooking progress of your food. It consists of a bulb and a protective cover. To check if it is broken, look for a burned-out or broken bulb, a cracked or missing cover, or loose conne...Read morections. If the bulb does not light up despite being functional, there may be an issue with the assembly. Not replacing a damaged assembly can make it difficult to check your food or identify heating or spillage issues, so prompt replacement is essential. To remove your lamp assembly, first turn off the oven and allow it to cool down to avoid burns or electrical shock. If there is a separate power switch for the lamp assembly, turn it off. Alternatively, switch off the power at the circuit breaker for complete safety. Consult your user guide to find the wire connection point for the lamp assembly. You may need to remove a small cover or access panel to access it. Carefully unplug or detach the wire from the oven. Once the wire is disconnected, you can remove the entire lamp assembly from its mounting location. This OEM replacement part comes with a covered bulb and a wire connector.

This convection element generates heat to support even air circulation and consistent cooking performance. Its high-output design allows for efficient temperature recovery and uniform results. Replacing a damaged element can restore proper heating and baking performance.

This triple radiant surface element is designed to replace a malfunctioning burner beneath the glass cooktop of select electric ranges. It features a three-zone heating design that accommodates various cookware sizes, with adjustable wattage settings of approximately 1200W, 2000W, and 3000W. The element delivers consistent heat distributi...Read moreon across the cooking surface, helping to eliminate hot spots and improve cooking performance. Installation involves accessing the underside of the cooktop and securely connecting the element to the range’s wiring system. For safety, ensure the appliance is disconnected from power before beginning any replacement. Refer to your appliance’s service manual to confirm compatibility and installation procedures.

This heating element is designed to generate consistent, reliable heat for cooking or warming applications. Built for durability and even heat distribution, it supports effective temperature control and dependable performance during everyday use.