Models > 79097223412

79097223412 Kenmore Range - Overview

Sections of the 79097223412

[Viewing 6 of 6]
Keep searches simple, eg. "belt" or "pump".
Main Terminal Block Kit – Part Number: 5304409888
Main Terminal Block Kit
★★★★★
★★★★★
(12)
PartSelect #: PS471605
Manufacturer #: 5304409888
Terminal block kits are also known as terminal boards, or terminal strips, and they are found in a wide variety of household appliances. Most often in ranges, wall ovens, and dryers. This kit attaches...
$15.12
  In Stock
Infinite Burner Switch - Small Element - 240V – Part Number: 316436000
Infinite Burner Switch - Small Element - 240V
★★★★★
★★★★★
(9)
PartSelect #: PS1145039
Manufacturer #: 316436000
This is a part for your range. This switch controls the stovetop surface burner. If you notice that your stove top is not turning on or is not adjusting to the corresponding desired heat, it is mostly...
$48.85
  In Stock
Radiant Element with Limiter - 1200W – Part Number: 318178110
Radiant Element with Limiter - 1200W
★★★★★
★★★★★
(13)
PartSelect #: PS1528719
Manufacturer #: 318178110
This is a six-inch radiant element with limiter. It works in conjunction with your stove top range. The purpose of this part is to heat up the cooking area that is located on top of the range, also kn...
$131.57
  Special Order
Dual Element with Limiter – Part Number: 316555800
Dual Element with Limiter
★★★★★
★★★★★
(12)
PartSelect #: PS2581859
Manufacturer #: 316555800
Dual Element with Limiter -9 Inch /6 Inch - 1300W 1200W. With this element, you can adjust the size of the burner you want to use to match your pots/pans.
$175.60
  In Stock
Temperature Sensor – Part Number: 5304504897
Temperature Sensor
★★★★★
★★★★★
(6)
PartSelect #: PS11758156
Manufacturer #: 5304504897
$39.96
  In Stock
Light Lens Indicator – Part Number: 316557300
Light Lens Indicator
★★★★★
★★★★★
(4)
PartSelect #: PS2342816
Manufacturer #: 316557300
$16.27
  In Stock
SCREW – Part Number: 316021109
SCREW
PartSelect #: PS436929
Manufacturer #: 316021109
Sold Individually.
$11.61
  In Stock
Light Indicator - 125v – Part Number: 316022500
Light Indicator - 125v
PartSelect #: PS436960
Manufacturer #: 316022500
$43.91
  In Stock
Dual surface element switch – Part Number: 316238201
Dual surface element switch
★★★★★
★★★★★
(4)
PartSelect #: PS3504401
Manufacturer #: 316238201
This switch controls the stove top surface burner. This surface element control switch is for ranges. Surface element control switch turns the surface element on and off and controls how much heat...
$177.09
  In Stock
Oven Door Light Switch – Part Number: 316445500
Oven Door Light Switch
PartSelect #: PS1146807
Manufacturer #: 316445500
$49.22
  In Stock
Terminal Block Screw – Part Number: 5308014215
Terminal Block Screw
PartSelect #: PS474106
Manufacturer #: 5308014215
Size: 6-20 x 0.312 inch. Sold individually.
$2.29
  In Stock
Leveling Leg – Part Number: 318175510
Leveling Leg
PartSelect #: PS7784156
Manufacturer #: 318175510
This part is a levelling leg and it is used in conjunction with your range. The function of this part is to supply stability and support to your appliance. This part is adjustable to allow you to tail...
$20.83
  In Stock

Questions And Answers for 79097223412

Ask our experts a question about this model and we'll get back to you as soon as possible!

1 question answered by our experts.
    Sort by:
    Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
    Rick
    February 9, 2020
    Upper convection fan not working
    For model number 79097223412
    Hi Rick, thank you for your question. There are two parts that could cause this issue for you. You may need to check your fan itself. If that part is getting power but still not working then the issue is the fan. If the part is not getting any power then your issue may be with the control board itself. Good luck with your repair.

    1 person found this helpful.

    Was this helpful?
    Thank you for voting!

      Common Symptoms of the 79097223412

      [Viewing 6 of 6]
      Element will not heat
      Fixed by
      these parts
      Show All
      Little to no heat when baking
      Fixed by
      these parts
      Show All
      Will Not Start
      Fixed by
      these parts
      Show All
      Oven is too hot
      Fixed by
      these parts
      Show All
      Oven not heating evenly
      Fixed by
      these parts
      Show All
      Little to no heat when broiling
      Fixed by
      these parts
      Show All
      Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
      Cord was not tightened enough by delivery crew.
      PF alarm appeared on display. Noticed clicking when cord was moved. Had arced for some time and melted original block. New part slightly different. Only has 3 lugs, old one had six. Stack using washers provided. Take note of colors before disassembly. Use caution while working through access opening. The edges are sharp. Only tools needed are phillips screwdriver, deep socket for lug nuts. Nut driver optional. Hope this is helpful.
      Parts Used:
      Main Terminal Block Kit
      • Timothy from Spring Valley, AL
      • Difficulty Level:
        Really Easy
      • Total Repair Time:
        15 - 30 mins
      • Tools:
        Screw drivers, Socket set
      90 of 138 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      burned out burner
      First we removed two screws under the rim of the range top to open the lid. Lifted the lid and removed the screws from the bracket that holds the elements, Be careful with the clips that hold the element in, if you break them or bend them there aren't any more! Also note which holes they were in, they are marked according to the different sizes of elements. Disconnected the wires, needed needlenose pliers to grip them...connected new element, popped it back in place, replaced bracket, closed top ...Easy peasy!!!
      Parts Used:
      Radiant Element with Limiter - 1200W
      • Lori from Winter Haven, FL
      • Difficulty Level:
        Easy
      • Total Repair Time:
        Less than 15 mins
      • Tools:
        Pliers, Screw drivers
      59 of 72 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      Switch Was Making A Arcing Sound When Burner Was On
      Removed the back cover of the range. Removed the knob from the front of the switch. Removed 2 screws holding switch to range. Removed wires one at a time and connected to proper poles on replacement switch and reinstalled new switch on range
      Parts Used:
      Infinite Burner Switch - Small Element - 240V
      • Gerald from Paris, TN
      • Difficulty Level:
        Easy
      • Total Repair Time:
        15 - 30 mins
      • Tools:
        Screw drivers
      56 of 78 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!