79094172310 Kenmore Range - Overview

Diagrams for 79094172310

See every part. Know exactly what you need.

Parts for the 79094172310

$51.29

Infinite Burner Switch - Large Element

★★★★★

(87)

Part #316436001

The infinite burner switch controls the stove top eight-inch surface burner, which is the large surface element. If your surface element is not warming up, the element can be tested to determine whether or not it is defective. If your element is not defective, then it is more than likely that the infinite burner switch is the issue. Befor...Read more

Read less

$57.15

Temperature Sensor

★★★★★

(53)

Part #316490000

This genuine OEM oven probe is also known as an oven temperature sensor or range probe. This part is manufactured for a range, stove, or oven to detect the temperature within the oven cavity. The probe allows the oven to maintain the set temperature by sensing the temperature and sending the information to the ovens motherboard. You may n...Read more

Read less

$27.45

Light Bulb

★★★★★

(13)

Part #316538904

This OEM 40 watt appliance light bulb is used for some ranges, refrigerators, freezers, and microwaves. Simply locate the existing bulb, unscrew it from its socket, and replace with new light bulb. If the existing bulb is broken in the socket, disconnect the power to the refrigerator and use a pair of needle nose pliers to grip the intern...Read more

Read less

$63.75

Infinite Burner Switch - Small Element - 240V

★★★★★

(10)

Part #316436000

This is a part for your range. This switch controls the stovetop surface burner. If you notice that your stove top is not turning on or is not adjusting to the corresponding desired heat, it is mostly likely due to the burner switch needing to be replaced. You will need a #1 square-head screwdriver and needle-nose pliers. Disconnect the p...Read more

Read less

$81.35

Oven Rack

★★★★★

(19)

Part #316496201

This part is found inside your oven. This oven rack comes in the color chrome and measures 24 inches in width and 16 inches in length. This is an extremely simple repair that requires no tools. The package you will receive will contain one rack. The rack may warp or become distressed over time and will need to be replaced. The rack is wha...Read more

Read less

$26.37

LENS

★★★★★

(15)

Part #5304524341

The Frigidaire light bulb lens covers the interior light bulb in an oven. No tools are necessary to replace this item. After unplugging the appliance, slide off the wire bracket to remove the existing light bulb lens. Be sure to remove all broken glass, if applicable, before installing the new lens. It is recommended to check the state of...Read more

Read less

$95.93

GLASS

★★★★★

(14)

Part #5304503232

This tempered glass is supplied by the original manufacturer and measures 20 inches by 13 inches. It is an inner door glass, designed for use in ranges/ovens and has several purposes which include providing heat insulation, acting as protective barrier, and providing an opening to monitor the cooking/heating process. Over time the glass c...Read more

Read less

$91.46

Bottom Panel

★★★★★

(31)

Part #316400601

This is used as the "floor" of the oven cabinet. Note: Does not come with rivets or screws. Must be purchased locally.

$18.31

DRAWER GLIDE

★★★★★

(13)

Part #316407402

This rear drawer glide, also known as a storage drawer glide, is used in ranges. This helps hold the front side of the storage drawer and allows the drawer to easily slide in and out of the range. If your glide is damaged or missing, replacing it could solve any difficulty using the drawer. First, remove the storage drawer and locate the ...Read more

Read less

$21.95

GLIDE

★★★★★

(9)

Part #807047102

$96.75

Radiant Element with Limiter - 1200W

★★★★★

(16)

Part #318178110

This is a six-inch radiant element with limiter. It works in conjunction with your stove top range. The purpose of this part is to heat up the cooking area that is located on top of the range, also known as your stove top. If you suspect that your surface element is not properly heating then you may want to test the element for continuity...Read more

Read less

$92.35

Dual Element with Limiter

★★★★★

(14)

Part #316555800

This dual radiant surface element is designed for electric ranges and cooktops, offering two heating zones—9 inches and 6 inches—to accommodate a variety of cookware sizes. It delivers consistent, even heat for efficient cooking and serves as a direct replacement for damaged or underperforming elements. Operating at 240 volts, the unit fe...Read more

Read less

Questions And Answers for 79094172310

Ask our experts a question about this model and we'll get back to you as soon as possible!

Sort by:

James - For model number 79094172310

January 9, 2025

Left rear small burner will not come on. Tried to locate switch online but I can’t locate one with this model number.

Hi James, thank you for reaching out. The switch for the left rear burner is part number PS1145039. We hope this information is useful!

2 people found this instruction helpful.

Was this helpful?

Alice - For model number 79094172310

December 4, 2024

A code came up and it is F 10 Can you help me with that?

Hi Alice, Thank you for your great question. The F10 error code indicates that the oven's temperature is outside the safe operating range. This may be caused by loose or faulty wiring connections, power surges, or malfunctioning parts. To resolve the issue press cancel on the control panel and unplug the range from the electrical outlet or turn the circuit breaker off for 2 minutes. If the error code reappears when you plug it back in, you will need to check the temperature sensor and the electronic control board. We hope this helps!

$57.15

Temperature Sensor

$352.98

Electronic Control Board

Was this helpful?

Common Symptoms of the 79094172310

How this model fails, and the parts that fix it.

Element will not heat

Fixed by
these parts

Little to no heat when baking

Fixed by
these parts

Show All

Oven not heating evenly

Little to no heat when broiling

Fixed by
these parts

Show All

Door won’t open after self cleaning cycle

Gas igniter glows, but will not light

Fixed by
these parts

Show All

Videos related to models starting with 79094172310

Watch our pros, then fix it yourself.

Replacing the Infinite Burner Switch - Large Element

Replacing the Temperature Sensor

Replacing the Light Bulb

Replacing the Infinite Burner Switch - Small Element - 240V

Replacing the Bottom Panel

Replacing the GLASS

Replacing the DRAWER GLIDE

Replacing the Light Lens Indicator

Repair Tips From Fixers Like You

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Back Burner didn't function

136 of 152 people found this instruction helpful.

William from Burke, VA
Easy
15 - 30 mins
Screw drivers

We moved into our townhouse about 6 yrs ago. During the home inspection we checked the range and saw the Red light come on when we turned on each burner. After moving in we realized the large back burner did not work. The light came on but the element never got hot. I of course replaced the element but that did not work. Several years ... Read more passed and we just ignored the issue. We just got by with 3 burners. Lately we realized how much easier it would be to have all four burners working. Knowing that we will be selling our townhome soon we figured we should either fix the problem or replace the range.

I didn't want to call a repair man because I didn't want to be charged a $150 to have him come out and they to pay extra for parts (and of course a 2nd visit). So I went to www.Partselect.com and typed in the model of my range. Found the diagrams for my range and saw that from the switch ran a pair of wires to a Universal Receptacle (aka Terminal Block Kit). I figured since the Red light turns on when I turn the switch on it has to be the Terminal Block.

I ordered the part from www.Partselect.com ($14.00 including shipping) and replaced the part. The burner still would not get hot. I decided to test the switch. I removed the Control Panel cover (which is secure by 2 screws just below the digital clock). Once the cover was off, I saw the Blue wires going from the switch to the Terminal Block. To test the switch, I disconnected the two Blue Wires from connectors H1 and H2 and temporarily connected them to H1 and H2 of another switch. Sure enough, when I turned the other switch the element got hot.

So I placed another order from www.Partselect.com for a replacement switch ($50 including shipping). When that part came, I flipped the electrical circuit going to the range. I then removed the Control Panel cover again. With the new switch in hand (holding it near the old switch still attached to the Control Panel, I used the pliers to pull out each wire from it's connector and place it to it's corresponding connector on the new switch. Once all the wires were connected to the new switch, I pulled the knob of the switch off then used a phillips screwdriver to remove the two screws holding the switch to the control panel. I replaced the old switch with the new one put the screws back in, replaced the knob. Turned the circuit back on and tested to make sure that the element got hot. When it did, then I replaced the Control Panel cover and enjoyed a nice dinner that was cooked in less time than we're accustomed to because of the new burner. So I spent a total of $64.00 to fix our range. Less than half the amount I would've spent if I called for a technican. And far less then buying a new range.

Partselect is a great resource for information. They have diagrams and schematics available to view and/or download. And when ordering it's a snap because there's an "Add to Cart" button next to each part it lists. So there's no confusion. I've already recommended Partselect.com to about 5 people. And will continue to do so!!

Read less

Was this helpful?

Oven wouldn't operated. Error code F9

76 of 101 people found this instruction helpful.

Richard from Centennial, CO
Really Easy
Less than 15 mins
Nutdriver

I called a repair place. They charged $54 to diagnose, (said it needed a new latch motor) then wanted $220 to complete the repair. I checked online prices and did it myself for about 15 minutes work and the latch motor itself ($44?).

Was necessary to uplug the range, pull it away from the wall and remove the back panel sheet m ... Read more

Read less

Was this helpful?

burned out burner

70 of 99 people found this instruction helpful.

Lori from Winter Haven, FL
Easy
Less than 15 mins
Pliers, Screw drivers

First we removed two screws under the rim of the range top to open the lid. Lifted the lid and removed the screws from the bracket that holds the elements, Be careful with the clips that hold the element in, if you break them or bend them there aren't any more! Also note which holes they were in, they are marked according to the differ ... Read more

Read less

Was this helpful?