EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

79075443410 Kenmore Range - Overview

Diagrams for 79075443410

See every part. Know exactly what you need.

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
IGNITOR,BAKE – Part Number: 5304534663
$84.65
In Stock
IGNITOR,BAKE
★★★★★
★★★★★
(17)
Part #5304534663
This gas oven bake igniter is designed to initiate the heating process by activating the burner during baking cycles. It functions by heating up until it reaches the ignition point, allowing gas to ignite and maintain consistent oven temperatures. A failing igniter is a common cause of heating issues, including longer preheat times, uneven baking, or complete failure to heat. Replacing the igniter restores proper oven function and ensures reliable performance. Installation should be performed with the appliance disconnected from power and gas supply for safety.
Left Front Orifice - 9.5K – Part Number: 316527500
$36.30
In Stock
Left Front Orifice - 9.5K
★★★★★
★★★★★
(2)
Part #316527500
This orifice is a replacement fuel-delivery component designed to regulate gas flow to a burner. It plays a critical role in maintaining proper flame size and efficiency and is commonly replaced when flow becomes restricted or uneven.
SCREW – Part Number: 316021109
$26.35
In Stock
SCREW
Part #316021109
Sold Individually.
Range Grate Set – Part Number: A00263801
$179.98
In Stock
Range Grate Set
Part #A00263801
This surface burner grate set is for ranges. The surface burner grate set provides a stable surface for cookware on the surface burner.
PROBE – Part Number: 5304525427
$46.18
In Stock
PROBE
Part #5304525427
This OEM-manufactured metal temperature sensor, or oven probe, measures and regulates the temperature within the oven. If you find that your food is being overcooked, undercooked, or is not cooking evenly, the sensor may be faulty. You can verify this by testing it with a multimeter or looking out for an error code on the control board. If you do not replace the broken sensor, your oven will run too hot or too cold. To replace the sensor, you first need to turn off the power to the oven and let it cool down. Access the probe inside the oven cavity, it is commonly attached to the rear wall. Using a screwdriver or pliers, remove any screws or clips that are securing the sensor in position. You may also need to unscrew or unclip the wire attached to the probe from the back of the oven. This sensor is sold as a single unit.
SCREW – Part Number: 5304507924
$13.77
In Stock
SCREW
Part #5304507924
This is an authentic door handle mounting screw, which works with ranges, wall ovens and microwaves.
Leveling Leg – Part Number: 318175510
$36.06
In Stock
Leveling Leg
Part #318175510
This part is a levelling leg and it is used in conjunction with your range. The function of this part is to supply stability and support to your appliance. This part is adjustable to allow you to tailor each leg to meet your levelled cooking needs. A range typically uses four of these parts, and this model is sold individually. This part measures to be just over a square inch wide, and almost two inches high. The body of this part resembles a screw and is made of metal. The bottom of the leg is black, flat, and made of plastic.
SCREW – Part Number: 316282700
$20.85
In Stock
SCREW
Part #316282700
Sealed Burner - 5K – Part Number: 316438200
$59.35
In Stock
Sealed Burner - 5K
Part #316438200
This sealed surface burner delivers controlled heat for precise cooking while preventing spills from entering internal components. Designed for efficiency and easy cleaning, it is replaced when ignition fails, heat output weakens, or burner performance becomes inconsistent.
Range Ignitor/Orifice Assembly – Part Number: 316536610
$81.35
In Stock
Range Ignitor/Orifice Assembly
Part #316536610
This genuine OEM top burner igniter and orifice assembly is designed to ensure reliable ignition and proper gas flow for your cooktop burner. Combining the igniter electrode and gas orifice in one unit, it helps deliver a steady flame and consistent cooking performance. Ideal for replacing a faulty assembly, it resolves issues such as burners failing to light, delayed ignition, or uneven flames. Built for dependable operation, it helps restore safe and efficient use of your appliance.
BULB – Part Number: 318946400
$53.85
In Stock
CONVECTION FAN MOTOR – Part Number: 316256900
$144.05
In Stock
CONVECTION FAN MOTOR
Part #316256900

Common Symptoms of the 79075443410

How this model fails, and the parts that fix it.

Watch our pros, then fix it yourself.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Oven wouldn't heat - broiler and burners worked fine-Bake Burner Igniter didn't work
190 of 229 people found this instruction helpful.
  • Debbie from Rockford, MI
  • Easy
  • 15 - 30 mins
  • Nutdriver, Screw drivers
It was the week before Thanksgiving and we didn't know what to do without an oven. I did some research on Google and of all the websites out there, I found a decent price here at Parts Select and ordered it on Friday. I was shocked when FEDEX pulled up to the door on Saturday afternoon. I went online to youtube and found a step by step video specifically for this part. It's posted by the Repair Clinic. http://www.youtube.com/watch?v=cLxKoF16gac. I was able to fix the part and probably saved at least $150.00 for a service call and repair time. The part cost about $90 and I was done in less than 15 minutes. We just got this stove about 2 years ago and I'm thinking maybe we could have saved my old stove since it had the same problem. Great job Parts Select - I got just what I needed and saved a ton of money in the process. Thanks also for their great informative video online. We had a great Thanksgiving and were very thankful for all our hot food fresh from the oven.
Was this helpful?
Thank you for voting!
The oven would not ignite on bake setting
19 of 20 people found this instruction helpful.
  • Michael from NOBLESVILLE, IN
  • Really Easy
  • 15 - 30 mins
  • Nutdriver, Screw drivers
After reading a lot of reviews online, I came to the conclusion it was the bake igniter. The "glow rod" would glow but would not ignite the oven. The broiler would ignite and the top burners would work. I removed the racks, took a screwdriver and removed the 2 screws in the back corners. I then slid the bottom shield towards the back then lifted up and the shield came off and exposed the flame shield. I removed the screws the hold that in place on the front of the oven with my 6 way screwdriver. I used the nutdriver part. Lifted that off which exposed the the actual flame tube and bake igniter. There were two screws, used the nutrdiver on the 6 way screwdriver, holding the bake igniter on. The screws are on the side of it. Removed those and the igniter came free. I pulled out the warming drawer and followed the wire from the igniter to a wiring harness. Pulled that apart and pulled the whole thing out through the oven. Got the new part, reversed order of removal. Fired right up. Pretty pricey part. But, saved 500+ dollars for a new range. Actual removal and install of new part, maybe 20 minutes if that. Super easy.
Was this helpful?
Thank you for voting!
Oven would not ignite, gas smell, igniter glows
11 of 13 people found this instruction helpful.
  • John from PORT JEFF STA, NY
  • Really Easy
  • 30 - 60 mins
  • Nutdriver, Screw drivers, Socket set
Disconnected power, I removed the igniter from oven. Measured the resistance (275 ohms) and then the current draw. DO NOT ATTEMPT THIS UNLESS YOU ARE ABLE TO ACCOMPLISH THIS SAFELY. I made a harness and connected the old igniter to 110 V ac, Current draw thru the meter settled at 2.7 Amps. Too weak to fully open gas valve. Valve require s 3.2 - 3.6 amps to fully operate properly. New igniter measured 300 ohms and current draw was 3.4 amps. Installed new part and everything works fine. Correct part and good service from this site
Was this helpful?
Thank you for voting!