This genuine OEM oven probe is also known as an oven temperature sensor or range probe. This part is manufactured for a range, stove, or oven to detect the temperature within the oven cavity. The prob...
This OEM 40 watt appliance light bulb is used for some ranges, refrigerators, freezers, and microwaves. Simply locate the existing bulb, unscrew it from its socket, and replace with new light bulb. If...
This part is found inside your oven. This oven rack comes in the color chrome and measures 24 inches in width and 16 inches in length. This is an extremely simple repair that requires no tools. The pa...
The oven burner igniter simply ignites the gas so it can heat the oven burner. The igniter does this by drawing electrical currents through the oven safety valve to open it. If the element shortens ou...
The Frigidaire light bulb lens covers the interior light bulb in an oven. No tools are necessary to replace this item. After unplugging the appliance, slide off the wire bracket to remove the existing...
This rear drawer glide, also known as a storage drawer glide, is used in ranges. This helps hold the front side of the storage drawer and allows the drawer to easily slide in and out of the range. If ...
The surface Meduim 9.5K burner cap is located on the top of the burner head and is used in ranges and ovens. The burner cap helps spread out the burner flame for even heating, and protects the burner...
The anti-tip bracket kit comes with one metal bracket and two installation screws, and is sourced directly from the genuine manufacturer. It prevents the freestanding oven, range, or stove from tippin...
Sold Individually. These legs should be adjusted to make your appliance level on uneven flooring.
$5.45
In Stock
Questions And Answers for 79074233311
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
3 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Toby
January 20, 2020
The clock turns off everytime the left front burner is turned on. None of the other burners affect the clock. I would like to figure this out. Thanks
For model number 79074233311
Hello and thank you for writing.
This could possibly indicate a malfunctioning or shortened electronic control board PS8746793, you should check for signs of damage ( burn marks), and replace the part(s) as necessary. We hope this helps. Please contact us anytime if you require further assistance.
My oven lites sometimes but doesn’t get really hot. Does the igniter come one more than once in the operation of the oven when cooking something?It glows red but it doesn’t ignite the gas.
For model number 79074233311
Hello Thank you for contacting us. We have researched the model you have provided and have found
the part you are looking for is PartSelect Number PS2364063. The oven burner igniter simply ignites the gas so it can heat the oven burner. The igniter does this by drawing electrical currents through the oven safety valve to open it. We hope this helps.
My control board is black and nothing is working when I push the buttons. Last month I woke to the clock being off. Had to reset it happened several times. Board has been changed several times and was told defective boards. Hard to connect to sears for help. Is there something that can be reset maybe.
For model number 79074233311
Hi Rebecca, thank you for contacting us. You can perform a reset by unplugging your unit for a few minutes and then restarting it. If this does not help, we suggest that you check the wiring harness, door lock switch, part number PS16555576, and temperature sensor, part number PS1528542, for any damage, as these could be damaging your control board. If you require assistance to place an order, please contact customer service. We hope that helps!
Turned power off at electrical panel. Pulled oven away from wall. Removed back cover (6 screws), then unplugged wires from old receptacle. I had to pull the squeeze clips backwards & break them to remove the old receptacle - couldn't squeeze them enough to remove them otherwise. The old receptacle came out through the inside of the oven, and the new one snapped in easily from inside the oven as well. Replaced wiring, installed new bulb, restored power & tested. Replaced back cover. Good time to vacuum under/behind where the oven usually lives before sliding it back to the wall.
I called a repair place. They charged $54 to diagnose, (said it needed a new latch motor) then wanted $220 to complete the repair. I checked online prices and did it myself for about 15 minutes work and the latch motor itself ($44?).
Was necessary to uplug the range, pull it away from the wall and remove the back panel sheet metal, then 3 screws that mount the motor. Replace motor, reattach sheet metal. Plug in. Done. Ready to bake cookies.
The Fix App makes it easy to manage all your stuff in one place. Just snap a photo and we'll find and store your user manuals, receipts, and product information in one easy-to-find place!
"Like magic. I took a picture of the model number on my refrigerator, and the app identified it right away … Very convenient. I'm impressed." ★★★★★ - Clever Jeff
