EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

79071412403 Kenmore Range - Overview

Diagrams for 79071412403

See every part. Know exactly what you need.

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Light Bulb – Part Number: 316538904
$27.45
On Order
Light Bulb
★★★★★
★★★★★
(13)
Part #316538904
This OEM 40 watt appliance light bulb is used for some ranges, refrigerators, freezers, and microwaves. Simply locate the existing bulb, unscrew it from its socket, and replace with new light bulb. If the existing bulb is broken in the socket, disconnect the power to the refrigerator and use a pair of needle nose pliers to grip the internal fragments of the bulb to unscrew. Replace with the new bulb and reconnect the power to the refrigerator. These bulbs are sold individually and are a commonly replaced part; consider ordering a spare.
PROBE – Part Number: 316233903
$53.85
In Stock
PROBE
★★★★★
★★★★★
(24)
Part #316233903
Note: Connector could be different than original. If so cut & splice wires together with porcelain wire nuts.
LP Conversion Kit – Part Number: GRLP3
$56.33
In Stock
LP Conversion Kit
★★★★★
★★★★★
(9)
Part #GRLP3
This kit is used to convert your appliance to liquid propane. This liquid petroleum gas conversion kit contains seven orifices, each under an inch long.
GLASS – Part Number: 5304506004
No Longer Available
GLASS
★★★★★
★★★★★
(11)
Part #5304506004
This part is the replacement inner oven door glass for your oven. It is made of glass and is approximately 16 inches wide and 7 inches long. The oven door glass allows you to see inside the oven when the door is closed. The main reason to replace the inner oven door glass is if the old glass is cracked, broken, or missing. This part is an OEM part sourced directly from the manufacturer.
Leveling Leg Assembly – Part Number: 5304509869
$12.05
In Stock
Leveling Leg Assembly
★★★★★
★★★★★
(3)
Part #5304509869
Sold Individually. These legs should be adjusted to make your appliance level on uneven flooring.
Front Burner Igniter/Orifice Assembly – Part Number: 316237805
$94.68
In Stock
Front Burner Igniter/Orifice Assembly
★★★★★
★★★★★
(3)
Part #316237805
This igniter and orifice assembly is a legitimate OEM replacement part for your gas stove, and includes the igniter, orifice assembly, and gas tube. This part may need replacing if the igniter fails or the tube is leaking gas. It is a very easy repair. Remove the grates and burners from the range. Unscrew the existing assemblies and pry off the cooktop. Locate the assembly you are replacing and undo the nut holding it in place. Pull out the igniter wire by hand, and install the new one, replacing the rest of the parts in reverse order.
OVERLAY – Part Number: 316220728
$48.48
In Stock
OVERLAY
★★★★★
★★★★★
(1)
Part #316220728
White in color. Overlay only.
Igniter/Orifice Mounting Screw – Part Number: 316240600
$21.79
In Stock
Igniter/Orifice Mounting Screw
★★★★★
★★★★★
(1)
Part #316240600
This part is the igniter/orifice mounting screw for your cooktop or range. It is approximately ½ an inch in length and is made of metal. The mounting screw connects the orifice to the cooktop. If the orifice is loose, or the screw is missing, this is the part that will replace it. This part is sold individually and is a genuine OEM part sourced directly from the manufacturer.
Burner Cap - LF, LR, RR – Part Number: 316213500
$52.96
In Stock
Burner Cap - LF, LR, RR
★★★★★
★★★★★
(1)
Part #316213500
This burner cap is a replacement cooking surface component designed to distribute heat evenly across the burner. It is commonly replaced when chipped, warped, or damaged by heat exposure.
Steel Washer – Part Number: 316008401
$23.05
In Stock
Steel Washer
Part #316008401
This steel washer is also known as the range washer and is used on your oven door. The measurements for the steel washer are a three quarter inch outer diameter, and a one quarter inch inner diameter. This washer is an OEM part, made of steel, which is sourced directly from the manufacturer. This specific steel washer is used with your range, to secure the inner and outer door together and to secure the oven door handle back in place. Users have ranked this repair as a simple installation that should take you less than fifteen minutes to complete.
Safety Valve – Part Number: 3203459
$253.00
In Stock
Safety Valve
★★★★★
★★★★★
(2)
Part #3203459
This safety valve ensures that no gas is released until the igniter has received the proper voltage needed to ignite the gas range.
Oven Door Seal with Clips – Part Number: 316239700
$108.74
In Stock
Oven Door Seal with Clips
★★★★★
★★★★★
(4)
Part #316239700
This oven door gasket is designed to form a secure seal around the perimeter of the oven door, helping to retain heat during cooking and improve energy efficiency. By preventing heat from escaping, it ensures consistent temperatures inside the oven for better cooking performance. The gasket is typically located along the inner edge of the oven door and can be replaced easily by removing the old seal and pressing the new one into place along the designated groove. Regular inspection is recommended, as a worn or damaged gasket can lead to uneven cooking and increased energy use.

Manuals & Care Guides for 79071412403

Click to download

Common Symptoms of the 79071412403

How this model fails, and the parts that fix it.

Watch our pros, then fix it yourself.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Safety valve would not open
126 of 159 people found this instruction helpful.
  • Ed from Darby, PA
  • Easy
  • 15 - 30 mins
  • Nutdriver, Screw drivers, Wrench set
I am an HVAC tech by trade so it wasn't difficult to diagnose problem with safety valve. The hard part was being without an oven for a week. Repair was simple and effective--oven works good as new.
Shut off gas and unplugged oven. Removed floor of oven between broiler and bake section, used wrenches to disconnect gas line from saf ety valve in back of oven, used philipps head screwdriver to remove burner assembly and gas valve, reversed process to replace. Checked out operation--OK.
Was this helpful?
Thank you for voting!
Bought a new gas oven that did not come with a propane conversion kit.
125 of 179 people found this instruction helpful.
  • Denny from Bishop, CA
  • Easy
  • 30 - 60 mins
  • Nutdriver, Wrench set
I followed the simple instructions that were included in the kit. I started by replacing the 5 orifices on the top burners. The orifices are well labeled with numbers and colors. Next, I tightened the broiler burner orifice and the oven burner orifice with a 1/2 inch wrench. I had to tighten them pretty good to get the flame down where it is supposed to be. Then, I checked for leaks and I was then ready to cook.
Was this helpful?
Thank you for voting!
Stove was set up for natural gas and needed to be converted to LP
118 of 193 people found this instruction helpful.
  • Ed from Orange, TX
  • Easy
  • 30 - 60 mins
  • Nutdriver, Screw drivers
The LP conversion kit contained very good, detailed instructions. I replaced the gas orifices, took off the bottom door and adjusted the regulator.

Used the screwdriver to adjust the low flame and everything was done.
Was this helpful?
Thank you for voting!