Models > 79060702901

79060702901 Kenmore Range - Overview

Sections of the 79060702901

[Viewing 4 of 4]
Keep searches simple, eg. "belt" or "pump".
Oven Bake Element – Part Number: 316075103
Oven Bake Element
★★★★★
★★★★★
(384)
PartSelect #: PS438018
Manufacturer #: 316075103
The Oven Bake Element is a black, metal part which supplies heat to the oven. This element is 19-1/2" wide x 18-1/2" long and has 3-1/2" inserts. It is rated as "Easy" to install by users, and attache...
$47.12
  In Stock
Steel Washer – Part Number: 316008401
Steel Washer
PartSelect #: PS436497
Manufacturer #: 316008401
This steel washer is also known as the range washer and is used on your oven door. The measurements for the steel washer are a three quarter inch outer diameter, and a one quarter inch inner diameter....
$17.42
  In Stock
LEVELING LEG ASSY – Part Number: 5304509869
LEVELING LEG ASSY
★★★★★
★★★★★
(3)
PartSelect #: PS12364627
Manufacturer #: 5304509869
Sold Individually. These legs should be adjusted to make your appliance level on uneven flooring.
$5.07
  In Stock
Broiler Pan Grate Insert – Part Number: 5304494997
Broiler Pan Grate Insert
★★★★★
★★★★★
(3)
PartSelect #: PS9864838
Manufacturer #: 5304494997
This includes pan and insert.
$63.35
  In Stock
Light Lens Indicator – Part Number: 316557300
Light Lens Indicator
★★★★★
★★★★★
(4)
PartSelect #: PS2342816
Manufacturer #: 316557300
$16.27
  In Stock
Oven Door Seal with Clips – Part Number: 316239700
Oven Door Seal with Clips
★★★★★
★★★★★
(3)
PartSelect #: PS440011
Manufacturer #: 316239700
Also known as gasket.
$111.81
  In Stock
SCREW – Part Number: 316021109
SCREW
PartSelect #: PS436929
Manufacturer #: 316021109
Sold Individually.
$11.61
  In Stock
Leveling Leg – Part Number: 316272900
Leveling Leg
PartSelect #: PS977569
Manufacturer #: 316272900
This part is sold individually. The leveling leg is black in color and measures approximately 2 inches in length. It is made of plastic. The leveling leg is found underneath your range and may crack o...
$16.57
  In Stock
Terminal Block Kit – Part Number: 5303935271
Terminal Block Kit
★★★★★
★★★★★
(3)
PartSelect #: PS2333392
Manufacturer #: 5303935271
$56.78
  In Stock
Handle Mounting Screw – Part Number: 316001009
Handle Mounting Screw
★★★★★
★★★★★
(1)
PartSelect #: PS436183
Manufacturer #: 316001009
Sold individually.
$25.72
  In Stock
Door/Bracket Screw – Part Number: 215822000
Door/Bracket Screw
PartSelect #: PS423766
Manufacturer #: 215822000
Sold Individually.   No Longer Available
End Cap – Part Number: 316137000
End Cap
PartSelect #: PS439479
Manufacturer #: 316137000
$49.36
  In Stock

Questions And Answers for 79060702901

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Common Symptoms of the 79060702901

[Viewing 7 of 7]
Little to no heat when baking
Fixed by
these parts
Show All
Element will not heat
Fixed by
these parts
Show All
Oven not heating evenly
Fixed by
these parts
Show All
Will Not Start
Fixed by
these parts
Show All
Oven is too hot
Fixed by
these parts
Show All
Little to no heat when broiling
Fixed by
these parts
Show All
Touchpad does not respond
Fixed by
these parts
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Oven woudn't heat
1. Removed two screws, pulled out the element, voltage tested the element and determined it was an open circuit (bad element).
2. Ordered the part from partselect.com
3. Disconnected element, connected the new one, and screwed it back in.
Parts Used:
Oven Bake Element
  • David from Shawnee, KS
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
1264 of 1327 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Element cracked in two pieces
Shut off circuit breaker to stove and collected the tool from the basement. Turned on flashlight. Unscrewed the two hex nuts from the old element/back of the oven. Slid the old element prongs out of the back, exposing the connecting wires. Pulled the connecting wires off of the old element, carefully, so that the connections wouldn't come off of the wires. Threw the old element pieces in the garbage. Connected the new element to the connecting wires and re-fastened the hex nuts. My husband had wanted to call the repair man, but it didn't look too difficult, so I decided to try it on my own. Boy was he surprised when I fixed it, and for a fraction of the cost of hiring a repairman! Ladies, we can do this ourselves!!! :) Thank you for being there for us to order our part from, Parts Select, we had our new part in less than 24 hours, so the shipping was blazing fast!!! Keep up the good work!!! :)
Parts Used:
Oven Bake Element
  • Michael from Green Bay, WI
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver
798 of 898 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
oven did not heat
removed screws pulled element out. removed wire from old element replaced with new element.very easy
Parts Used:
Oven Bake Element
  • jack from chambersburg, PA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
430 of 454 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!