EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

79060702900 Kenmore Range - Overview

Diagrams for 79060702900

See every part. Know exactly what you need.

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Leveling Leg Assembly – Part Number: 5304509869
$12.05
In Stock
Leveling Leg Assembly
★★★★★
★★★★★
(3)
Part #5304509869
Sold Individually. These legs should be adjusted to make your appliance level on uneven flooring.
Light Lens Indicator – Part Number: 316557300
$20.85
In Stock
Light Lens Indicator
★★★★★
★★★★★
(4)
Part #316557300
This range indicator light lens is designed to cover and protect the appliance’s indicator light, allowing you to easily see when a burner or oven is in use. Made from clear, heat-resistant plastic, it helps shield internal components from grease, moisture, and everyday wear. Replacement is ideal if the original lens is cracked, discolored, or missing, helping restore visibility and maintain safe, reliable operation.
Steel Washer – Part Number: 316008401
$23.05
In Stock
Steel Washer
Part #316008401
This steel washer is also known as the range washer and is used on your oven door. The measurements for the steel washer are a three quarter inch outer diameter, and a one quarter inch inner diameter. This washer is an OEM part, made of steel, which is sourced directly from the manufacturer. This specific steel washer is used with your range, to secure the inner and outer door together and to secure the oven door handle back in place. Users have ranked this repair as a simple installation that should take you less than fifteen minutes to complete.
Oven Door Seal with Clips – Part Number: 316239700
$108.74
In Stock
Oven Door Seal with Clips
★★★★★
★★★★★
(4)
Part #316239700
This oven door gasket is designed to form a secure seal around the perimeter of the oven door, helping to retain heat during cooking and improve energy efficiency. By preventing heat from escaping, it ensures consistent temperatures inside the oven for better cooking performance. The gasket is typically located along the inner edge of the oven door and can be replaced easily by removing the old seal and pressing the new one into place along the designated groove. Regular inspection is recommended, as a worn or damaged gasket can lead to uneven cooking and increased energy use.
Broiler Pan Grate Insert – Part Number: 5304494997
No Longer Available
Broiler Pan Grate Insert
★★★★★
★★★★★
(3)
Part #5304494997
This OEM broiler pan and grate insert are cooking accessories used in your oven to broil food. The pan catches drippings and prevents them from falling into the appliance, while the grate insert ensures the food is cooked evenly. You can usually find them at the bottom of your appliance. If your broiler pan and grate insert are broken, your food may not cook evenly and the drippings may fall into your appliance. Additionally, it can be difficult to clean a damaged pan or grate. These authentic accessories come together when you purchase them, ensuring that you can enjoy evenly-cooked food without any mess.
Terminal Block Kit – Part Number: 5303935271
$56.89
In Stock
Terminal Block Kit
★★★★★
★★★★★
(6)
Part #5303935271
This range terminal block kit provides a secure connection point between the household power cord and the appliance’s internal wiring. It helps distribute electrical power safely and reliably to the range’s heating and control components. A damaged or worn terminal block can prevent the oven or burners from operating correctly, cause buzzing noises, or lead to power interruptions, and replacing it can help restore proper electrical function and safe operation.
SCREW – Part Number: 316021109
$26.35
In Stock
SCREW
Part #316021109
Sold Individually.
Leveling Leg – Part Number: 316272900
$25.25
In Stock
Leveling Leg
★★★★★
★★★★★
(1)
Part #316272900
This part is sold individually. The leveling leg is black in color and measures approximately 2 inches in length. It is made of plastic. The leveling leg is found underneath your range and may crack or wear down over time. This will need to be replaced if it has broken or gone missing. If you notice your oven is wobbling or uneven it may be due to the leveling leg needing to be replaced. This part can be adjusted to accommodate different heights due to uneven flooring. This is a genuine OEM part sourced directly from the manufacturer.
Screw – Part Number: 5303288565
$8.60
In Stock
Screw
Part #5303288565
This is an authentic mounting screw, which works with ranges, wall ovens, cooktops and warming drawers.
Handle Mounting Screw – Part Number: 316001009
$25.25
In Stock
End Cap – Part Number: 316137000
No Longer Available
End Cap
Part #316137000
Terminal Block Screw – Part Number: 5308014215
$6.55
In Stock
Terminal Block Screw
★★★★★
★★★★★
(1)
Part #5308014215
Size: 6-20 x 0.312 inch. Sold individually.

Common Symptoms of the 79060702900

How this model fails, and the parts that fix it.

Watch our pros, then fix it yourself.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
In a seasonal house, a mouse got into the oven insulation during the winter. We have gotten rid of the mouse but when we used the oven we could smell mouse urine! Upon inspection we could see that the mouse lived and urinated in the oven insulation.
25 of 26 people found this instruction helpful.
  • Susan from Newington, CT
  • Easy
  • 15 - 30 mins
  • Screw drivers
My husband removed the screws that held the top of the stove on and then lifted the top up. It is hinged. He then took out the old insulation, wiped down all visible parts of the interior with a bleach solution and replaced the blanket insulation with the new insulation. That took care of the problem!
Was this helpful?
Thank you for voting!
Burner indicator light lense broke off
5 of 5 people found this instruction helpful.
  • Kathy from NEW BERN, NC
  • Really Easy
  • Less than 15 mins
  • Nutdriver
The light apparatus was loose behind the panel. Remove the remaining part of the lens. Install the new lens from the outside of the panel and hold it in position, protruding into the inside of the panel. Slide the light apparatus onto the lens from the inside, allowing the bracket to hold it in place - it will be spring loaded, which will hold it in place.
Was this helpful?
Thank you for voting!
Rusted leveling foot
6 of 9 people found this instruction helpful.
  • Melinda from Three Rivers, MA
  • Really Easy
  • Less than 15 mins
  • Pliers, Screw drivers, Socket set, Wrench (Adjustable)
I couldn't unscrew the leveling foot because it was rusted and corroded. The bracket holding it was easy to remove so I took the bracket with the corroded foot off and replaced it with the new foot and bracket. Very simple. I made sure I oiled it so it wouldn't rust again.
Was this helpful?
Thank you for voting!