79049283000 Kenmore Range - Overview

Diagrams for 79049283000

See every part. Know exactly what you need.

Parts for the 79049283000

$53.85

Temperature Sensor

★★★★★

(9)

Part #5304504897

The temperature sensor, also known as an oven probe, helps measure the temperature within the oven cavity. If your oven is too hot, not heating evenly, has little to no heat when baking, or flashing F3/F4 error messages on your control board, you may need to replace this part. This part measures 6" long and is made of metal. Please make s...Read more

Read less

$19.68

SCREW

Part #216858001

Sold Individually.

$25.25

SCREW 10-32X.375 CO

Part #134154100

$6.55

Flat Washer

Part #134716700

CHANNEL

Part #318259410

BRACKET

Part #318247402

CHANNEL

Part #318259310

CHANNEL

Part #318259311

$19.30

LENS

Part #318378201

CHANNEL

Part #318259411

$55.29

HANDLE

Part #318251100

$35.80

CORD

Part #318144005

Common Symptoms of the 79049283000

How this model fails, and the parts that fix it.

Oven is too hot

Fixed by
these parts

Show All

Little to no heat when baking

Fixed by
these parts

Show All

Oven not heating evenly

Fixed by
these parts

Show All

Element will not heat

Fixed by
these parts

Show All

Repair Tips From Fixers Like You

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Top oven overheating

8 of 12 people found this instruction helpful.

Ronald from NEVADA, MO
Very Easy
Less than 15 mins
Screw drivers

Have a double wall oven and the top oven would not shut off or broiler part would stay on and burn tops of food. Since bottom oven was not having any issues felt like it could
Not be control panel so decided to try the temp sensor. Since replacing oven has worked properly.

Was this helpful?

Both oven bake and broil elements lost power suddenly at the same time.

8 of 17 people found this instruction helpful.

Alexander from DELMAR, NY
Really Easy
30 - 60 mins

Installation of the temparature sensor, one of the technician recommended parts took no time, just two screws and a snap off/snap on part. It did not fix the problem. I then replaced the main control panel, which requires more work, but didn't solce the ussue either. I then replaced the thermal fuse, which wasn't mentioned by tech support ... Read more

Read less

Was this helpful?

sensor should pull into oven enough to easily unsnap and snap but didn't pull out

3 of 5 people found this instruction helpful.

Mary from EDGAR, WI
A Bit Difficult
30 - 60 mins
Screw drivers

on the back side of the wall oven the sensor wire was ziptied tight. we had to totally pull oven out of its wall space, remove back panel, unhook zip tie, feed through sensor hole around insulation, connect and then replace back and return and relevel the oven. I have

Was this helpful?