Models
>
79042733400
79042733400 Kenmore Cooktop - Overview
Sections of the 79042733400
[Viewing 4 of 4]
Manuals & Care Guides for 79042733400
Click to downloadKeep searches simple, eg. "belt" or "pump".
Dual Element with Limiter
PartSelect #: PS2581859
Manufacturer #: 316555800
Dual Element with Limiter -9 Inch /6 Inch - 1300W 1200W.
With this element, you can adjust the size of the burner you want to use to match your pots/pans.
$175.53
In Stock
Screw
PartSelect #: PS461124
Manufacturer #: 5303288565
This is an authentic mounting screw, which works with ranges, wall ovens, cooktops and warming drawers.
$9.48
In Stock
Surface Burner Switch - 6 Inch
PartSelect #: PS2342880
Manufacturer #: 318293824
This switch controls the stove top surface burner.
$71.87
In Stock
Infinite Switch Kit
PartSelect #: PS444539
Manufacturer #: 318191000
This switch controls the stove top surface burner.
$140.87
In Stock
Surface Burner Element - 6 Inches - 1200W
PartSelect #: PS978580
Manufacturer #: 318198817
$155.35
In Stock
Questions And Answers for 79042733400
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Common Symptoms of the 79042733400
[Viewing 1 of 1]
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Burned element
Flip up top, remove wires and two screws. Replace in opposite way. Turn off power to stove first.
Parts Used:
-
Tom from Wallingford, CT
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Nutdriver, Screw drivers
64 of 118 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Element Burn out
-
Jesse from Forest, VA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Nutdriver, Screw drivers
25 of 59 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Old element connections different from new element
Disconnected power at breaker. Removed cooktop mounting screws, lifted top and propped in up position. Removed two screws and lowered two front burners mounting frame. Wiggled dual element free at the clips and proceeded to swap wires one at a time and realized the difference with connectors 1a and 2b much later when only the center porti
... Read more
on was heating up. Finally figured out the problem and everything works as advertised. Pay attention if you own a Kenmore product.
Read less
Parts Used:
-
Frederic from KILLEEN, TX
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:30 - 60 mins
-
Tools:Pliers, Screw drivers, Socket set
9 of 12 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!