Liquid collecting beneath a burner pan may mean the surrounding gasket is damaged or out of place. The seal sits between the cooktop and drip pan to block spills from leaking through the joint. First check that the pan is seated correctly and that food buildup is not holding it above the surface. Match the replacement to the complete mode...Read morel number before purchase. Work only when the appliance is cool, and disconnect power or close the gas supply if the repair requires opening the cooktop. Remove the old gasket material, wipe the surface clean and dry, then install the seal in the same position without using unapproved adhesive.
***No Conversion Kit Required - Adjust On Appliance***
This valve automatically cuts off the flow of a liquid or gas when it reaches a certain pressure.
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Gas stove won’t light on half the appliance
4 of 9 peoplefound this instruction helpful.
Julieta from ELMIRA, NY
A Bit Difficult
1- 2 hours
Screw drivers, Socket set
First we replaced the wiring harness because a multi-meter said it wasn’t getting power. That was only partially true. The wiring harness was burned looking so we just kept it instead of sending it back. When the spark module got here the burner caps were removed and then the wires were noted where they went on the module and then the pow
... Read moreer and gas were turned off. The spark module was removed and then the stove was tested and we were back in business.