EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

79032602319 Kenmore Range - Overview

Diagrams for 79032602319

See every part. Know exactly what you need.

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
LP Conversion Kit – Part Number: GRLP4
$60.51
In Stock
LP Conversion Kit
★★★★★
★★★★★
(9)
Part #GRLP4
The LP conversion kit is used in ranges
GLASS – Part Number: 5304503232
$95.93
In Stock
GLASS
★★★★★
★★★★★
(14)
Part #5304503232
This tempered glass is supplied by the original manufacturer and measures 20 inches by 13 inches. It is an inner door glass, designed for use in ranges/ovens and has several purposes which include providing heat insulation, acting as protective barrier, and providing an opening to monitor the cooking/heating process. Over time the glass can break or break from impact, thermal shock, or improper installation. If the glass is defective, it needs to be replaced promptly to avoid leaking, loss of insulation and potential harm to the user. Remove any fasteners or clips that secure the glass and carefully dispose of it. Position the new glass in the same position and secure it appropriately.
CAP – Part Number: 5304508442
$39.82
In Stock
CAP
★★★★★
★★★★★
(8)
Part #5304508442
The surface Meduim 9.5K burner cap is located on the top of the burner head and is used in ranges and ovens. The burner cap helps spread out the burner flame for even heating, and protects the burner head from cooking spills. Without the cap you can have a burning gas torch. If your cap is missing or is discolored, replacing this part can solve the issue. This part comes in the color black. Remember to unplug your range from the power source and allow surface to cool before installing this part. Refer to the manual provided by the manufacturer for further installation instructions.
CAP – Part Number: 5304508441
$42.82
In Stock
CAP
★★★★★
★★★★★
(6)
Part #5304508441
Sold individually. This part helps the flame to spread for even heat. Also protects your burner head from spills.
Mounting Screw – Part Number: 5304453707
$25.25
In Stock
Mounting Screw
Part #5304453707
Left Front Orifice - 9.5K – Part Number: 316527500
$36.30
In Stock
Left Front Orifice - 9.5K
★★★★★
★★★★★
(2)
Part #316527500
This orifice is a replacement fuel-delivery component designed to regulate gas flow to a burner. It plays a critical role in maintaining proper flame size and efficiency and is commonly replaced when flow becomes restricted or uneven.
SCREW – Part Number: 316021109
$26.35
In Stock
SCREW
Part #316021109
Sold Individually.
Burner Mounting Screw – Part Number: 316540900
$25.25
In Stock
Burner Mounting Screw
Part #316540900
Sold individually.
REGULATOR – Part Number: 5304521339
$80.25
In Stock
REGULATOR
Part #5304521339
This valve automatically cuts off the flow of gas at a certain pressure.
Spark Ignitor – Part Number: 808608802
$77.98
In Stock
Spark Ignitor
★★★★★
★★★★★
(1)
Part #808608802
The function of the ignitor in your range is to create the spark that ignites the gas on the burners. If your spark ignition system is not functioning properly, you may need to replace the ignitor. This part is approximately 3 inches in length. The ignitor is located in the rear of the range, so you will need to remove the back panel in order to access it for this repair. Before beginning this repair, be sure that the gas valve for the range is shut off. You should also disconnect the power source to the range before you begin.
Right Rear Orifice – Part Number: 316527504
$38.71
In Stock
CAP – Part Number: 5304508510
$47.32
In Stock
CAP
★★★★★
★★★★★
(1)
Part #5304508510
Sold individually. This part helps the flame to spread for even heat. Also protects your burner head from spills.

Common Symptoms of the 79032602319

How this model fails, and the parts that fix it.

Watch our pros, then fix it yourself.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Cracked oven door inner glass
76 of 135 people found this instruction helpful.
  • Mitch from Fernandina Beach, FL
  • Easy
  • 15 - 30 mins
  • Screw drivers
Repair was quite easy, as long as you have the instructions for removing the door. The screws that hold the bottom of the door to the fixed hinge are placed into the side of the hinge assembly after removal; this holds the door at a 45 degree angle for easy removal. After that, just place the door on a flat surface and dismantle the door from the inside. The inner glass is contained in a metal frame with another piece of glass; this frame comes apart easily using the clips in each side. The door assembles easily after the glass is replaced; just take your time and give yourself enough room to lay out the parts as you go. Good luck!
Was this helpful?
Thank you for voting!
Broken glass interior oven door
33 of 56 people found this instruction helpful.
  • stephen from garden grove, CA
  • Easy
  • 30 - 60 mins
  • Screw drivers
Had to reference original owner's manual for instruction(s) on how to remove oven door. Used several "YouTube" videos to reference oven door design (Oven door glass is actually several layers of glass.) After completing about 30 mins of research and finding the right square drive bit, the repair went smoothly and without complications. Th e biggest challenge was researching and understanding what part(s) were needed and how to replace them. It seemed liked a lot of work doing the research however it sure beat a $350 repair bill. It cost me $90 and about 1 1/2 hours of total time. Oven works better than ever, thanks parts select for the part(s) and diagram(s) ...
Was this helpful?
Thank you for voting!
Regulator had propane leak past diaphragm
14 of 19 people found this instruction helpful.
  • Albern from Bainbridge IS., WA
  • Easy
  • 30 - 60 mins
  • Nutdriver, Wrench set
removed two screws disconnected inlet pipe and two outlet pipes, removed regulator. Replaced with new regulator. performed leak Test.
Was this helpful?
Thank you for voting!