79032392400 Kenmore Cooktop - Overview

Diagrams for 79032392400

See every part. Know exactly what you need.

Parts for the 79032392400

$59.17

MODULE

★★★★★

(2)

Part #5304505695

$42.61

Burner Pan Gasket

Part #318053901

Liquid collecting beneath a burner pan may mean the surrounding gasket is damaged or out of place. The seal sits between the cooktop and drip pan to block spills from leaking through the joint. First check that the pan is seated correctly and that food buildup is not holding it above the surface. Match the replacement to the complete mode...Read more

Read less

$54.10

Burner Igniter

★★★★★

(1)

Part #318148700

Also known as spark electrode. This part helps your burner ignite and produce flame.

$53.85

Support Bracket

Part #318264301

Bushing

Part #318146301

$205.43

Gas Pressure Regulator

Part #5308007974

***No Conversion Kit Required - Adjust On Appliance*** This valve automatically cuts off the flow of a liquid or gas when it reaches a certain pressure.

Drip Pan - White

Part #318168116

Sold individually. This drip pan is WHITE in color.

Medium Burner Base

Part #318148001

SCREW

Part #732022040

BURNER

Part #318148002

BURNER

Part #318148000

$81.51

TUBE

Part #318167801

Common Symptoms of the 79032392400

How this model fails, and the parts that fix it.

Will Not Start

Fixed by
these parts

Show All

Gas igniter glows, but will not light

Fixed by
these parts

Show All

Repair Tips From Fixers Like You

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Top burners were not lighting without a match

3 of 4 people found this instruction helpful.

Earl from ALLIANCE, OH
Easy
15 - 30 mins
Nutdriver, Pliers

Was easy...I pulled oven out from the wall so I could get to the back.i used a nut driver to remove small silver cover.matched up wires to the never module and re installed.pluged oven back in and burners lit perfectly

Was this helpful?

burner ingnighter would not lite burner

30 of 86 people found this instruction helpful.

Wayne from Palestine, IL
A Bit Difficult
30 - 60 mins
Nutdriver, Pliers, Screw drivers, Wrench (Adjustable)

Replaced the ingintion module, still did not work, replaced the burner complete with new ingiter , it now works but another one quit . the front right one has 5 ohms resistance ,replaced with new one with 0 ohms, the back left has 2 ohms resistance and now it does not work , will need to replace that burner allso. too bad you can't buy ju ... Read more

Read less

Was this helpful?

Two of theTop gas burners would not spark

0 of 2 people found this instruction helpful.

Robert R from Lewistown, PA
Easy
Less than 15 mins

Took 6 screws out holding the top on from the sides. Lifted the top front, popped out the spark module, Took 6wires off & reversed the processed to install the new one. I was really amazed when I ordered it Wednesday and it arrived on Friday. Believe me I bookmarked this site.

Was this helpful?