Models > 79031032804

79031032804 Kenmore Range - Overview

Sections of the 79031032804

[Viewing 6 of 6]

Manuals & Care Guides for 79031032804

Click to download
Keep searches simple, eg. "belt" or "pump".
Light Bulb – Part Number: 316538904
Light Bulb
★★★★★
★★★★★
(11)
PartSelect #: PS12751166
Manufacturer #: 316538904
This OEM 40 watt appliance light bulb is used for some ranges, refrigerators, freezers, and microwaves. Simply locate the existing bulb, unscrew it from its socket, and replace with new light bulb. If...
$19.88
  In Stock
Order within the next 59 mins and your part ships today!
LENS – Part Number: 5304524341
LENS
★★★★★
★★★★★
(5)
PartSelect #: PS16218465
Manufacturer #: 5304524341
The Frigidaire light bulb lens covers the interior light bulb in an oven. No tools are necessary to replace this item. After unplugging the appliance, slide off the wire bracket to remove the existing...
$10.52
  On Order
Temperature Sensor – Part Number: 5304504897
Temperature Sensor
★★★★★
★★★★★
(6)
PartSelect #: PS11758156
Manufacturer #: 5304504897
$39.96
  In Stock
Order within the next 59 mins and your part ships today!
Medium Burner - 9.5K – Part Number: 316212400
Medium Burner - 9.5K
★★★★★
★★★★★
(2)
PartSelect #: PS439737
Manufacturer #: 316212400
The surface burner head is used for ranges and ovens, and is located on the cooktop, where the flames go up. The surface burner spreads the gas through holes to create an even flame throughout the ent...
$34.25
  In Stock
Order within the next 59 mins and your part ships today!
Igniter/Orifice Mounting Screw – Part Number: 316240600
Igniter/Orifice Mounting Screw
★★★★★
★★★★★
(1)
PartSelect #: PS440022
Manufacturer #: 316240600
This part is the igniter/orifice mounting screw for your cooktop or range. It is approximately ½ an inch in length and is made of metal. The mounting screw connects the orifice to the cooktop. If the ...
$17.84
  Special Order
Broiler Pan Grate Insert – Part Number: 5304494997
Broiler Pan Grate Insert
★★★★★
★★★★★
(3)
PartSelect #: PS9864838
Manufacturer #: 5304494997
This includes pan and insert.
$63.35
  In Stock
Order within the next 59 mins and your part ships today!
Sealed Burner Head - 14k – Part Number: 316223400
Sealed Burner Head - 14k
★★★★★
★★★★★
(2)
PartSelect #: PS820297
Manufacturer #: 316223400
$67.18
  In Stock
Order within the next 59 mins and your part ships today!
Oven Light Socket – Part Number: 316116400
Oven Light Socket
★★★★★
★★★★★
(4)
PartSelect #: PS439060
Manufacturer #: 316116400
The oven light socket allows you to screw in a light bulb so that you can see the inside of your oven. The light socket is located in the back of your oven, so you will need to remove the back panel t...
$46.77
  In Stock
Order within the next 59 mins and your part ships today!
Spark Module – Part Number: 316135702
Spark Module
★★★★★
★★★★★
(2)
PartSelect #: PS2350722
Manufacturer #: 316135702
This spark module or range spark module, is used in ranges and ovens. The spark module monitors and controls the spark to ignite the surface burner in a range. It does this by sending a certain amount...
$87.96
  In Stock
Order within the next 59 mins and your part ships today!
Center Burner Orifice - 9.5K – Part Number: 316237902
Center Burner Orifice - 9.5K
PartSelect #: PS439993
Manufacturer #: 316237902
$47.15
  In Stock
Order within the next 59 mins and your part ships today!
Flat Glow Bar Igniter – Part Number: 318177710
Flat Glow Bar Igniter
★★★★★
★★★★★
(3)
PartSelect #: PS444179
Manufacturer #: 318177710
This flat glow bar igniter is designed for gas ovens. The function of the part is to ignite the gas to light the oven burner. If your gas igniter does not glow, or if it glows but will not light, you ...
$316.06
  In Stock
Order within the next 59 mins and your part ships today!
RACK – Part Number: 318262516
RACK
★★★★★
★★★★★
(2)
PartSelect #: PS3495822
Manufacturer #: 318262516
$86.42
  In Stock
Order within the next 59 mins and your part ships today!

Questions And Answers for 79031032804

Be the first to ask our experts a question about this model!

Common Symptoms of the 79031032804

[Viewing 6 of 6]
Oven is too hot
Fixed by
these parts
Show All
Gas igniter glows, but will not light
Fixed by
these parts
Show All
Will Not Start
Fixed by
these parts
Show All
Little to no heat when baking
Fixed by
these parts
Show All
Oven not heating evenly
Fixed by
these parts
Show All
Element will not heat
Fixed by
these parts
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Oven light receptacle broken - bulb base broke off
Turned power off at electrical panel. Pulled oven away from wall. Removed back cover (6 screws), then unplugged wires from old receptacle. I had to pull the squeeze clips backwards & break them to remove the old receptacle - couldn't squeeze them enough to remove them otherwise. The old receptacle came out through the inside of the oven, and the new one snapped in easily from inside the oven as well. Replaced wiring, installed new bulb, restored power & tested. Replaced back cover. Good time to vacuum under/behind where the oven usually lives before sliding it back to the wall.
Parts Used:
Oven Light Socket
  • Paul from Spokane Valley, WA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
57 of 74 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The burner would not light by itself, and the flame was lopsided.
The repair was nothing, but the diagnosis was a bit tricky. After carefully looking at the burner head, (cast aluminum) I pretty much figured out that the 4 small cast aluminum bumps that keep the burner cap positioned up in the air the correct amount to allow gas to flow under the cap, were worn down, preventing the gas from exiting properly by the igniter. My guess was correct. The new burner head solved all my problems. I love Parts Select for the ease of finding the correct parts and how fast they ship their orders. Great company, great service. Keep up the good work
Parts Used:
Sealed Burner Head - 14k
  • Roland from Auburn, ME
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
25 of 28 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
replacing the fan on a convection oven (fan was making a vibration noise)
This was the first time replacing the fan. It is a lot easier to work in the oven compartment with the oven door removed, only two screws on the door and the hinges were released. I found that a couple of the screws were either rusted or stripped so I used a pair of pliers to remove the screws that were holding the diffuser in place. Once there was access to the fan I found that the fan was warped and that the blades were scraping against the back wall of the oven. The next challenge was to remove the retaining nut. I used a sheet metal screw to secure the warped fan to keep it from spinning. once I figured out that you have to turn the retaining nut to the right to loosen, it came off easily. 1/2" socket with extension. When I replace the fan I used two washers for spacers to make sure that the fan would not scrape the wall of the oven. Its been tested many times and the oven does not make that horrible sound anymore.
Parts Used:
Convection Fan Blade
  • John from Stevensville, MD
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Pliers, Screw drivers, Socket set
14 of 18 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!