My Orders
78413 (ASTCSEF) LG Refrigerator - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Crisper bin gide roller broke off frame.
2 of 2 people
found this instruction helpful.
-
Steven from LONG BEACH, CA
- Easy
- Less than 15 mins
Ordered new part, which was crisper frame. Removed old frame and replaced it. Cleaned crisper glass and set in place.
Was this helpful?
Thank you for voting!
Switch stops working
2 of 2 people
found this instruction helpful.
-
David from PENNSVILLE, NJ
- Easy
- Less than 15 mins
-
Pliers, Screw drivers
Replace with new switch. this is the third switch i have replaced in 10 years. the only part, besides a light bulb, that has gone bad. obviously this is a problem with this model for Kenmore, or just poor switch design.
Was this helpful?
Thank you for voting!
Broken door basket
2 of 3 people
found this instruction helpful.
-
MARK from GRAND ISLAND, NY
- Really Easy
- Less than 15 mins
Removed broken door basket and snap in replacement.
The ordering process was quick and effective and shipped quick. Perfect replacement part. The do great work
The ordering process was quick and effective and shipped quick. Perfect replacement part. The do great work
Was this helpful?
Thank you for voting!
Light switch for refrigerator not functioning
2 of 3 people
found this instruction helpful.
-
shirley from ONALASKA, WI
- Easy
- 30 - 60 mins
-
Screw drivers
Followed instructions online
Was this helpful?
Thank you for voting!
Broke a piece off the top of the Gasket Holder
1 person
found this instruction helpful.
-
Jo Ann from Mitchell, SD
- Really Easy
- 30 - 60 mins
-
Screw drivers
YOUTUBE
Made it so easy!
Made it so easy!
Was this helpful?
Thank you for voting!
The shelf that holds the crisper drawers had cracked and finally broken.
1 person
found this instruction helpful.
-
Fred Lee from BOTHELL, WA
- Really Easy
- 30 - 60 mins
Bought a new shelf. Bought a center support (new), Put the new center support in the shelf. Removed glass, old shelf and drawers. Replaced the broken shelf by hooking the new one in to existing supports. Replaced glass. Replaced drawers.
Was this helpful?
Thank you for voting!
Top of retainer broke
1 person
found this instruction helpful.
-
Harley from IOWA FALLS, IA
- Really Easy
- 30 - 60 mins
-
Screw drivers, Socket set
Followed instructions
Was this helpful?
Thank you for voting!
No instructions
1 person
found this instruction helpful.
-
Rosario from BROOKLYN, NY
- A Bit Difficult
- 15 - 30 mins
Hard time clipping it in
Was this helpful?
Thank you for voting!
Lights didn't come on when door was opened
1 person
found this instruction helpful.
-
Philip from Ashland, MA
- A Bit Difficult
- 15 - 30 mins
-
Pliers, Screw drivers
I have moderate to good mechanical skills, but getting the old switch out was a sizeable challenge. Since this switch suffered some damage during extraction, I was lucky to have ordered a new one to replace it. Reinstall took approximately 90 seconds. PartSelect saved me an expensive service call.
Was this helpful?
Thank you for voting!
Light quit coming on when door opened.
1 person
found this instruction helpful.
-
Calvin from Northome, MN
- A Bit Difficult
- 15 - 30 mins
-
Screw drivers
Unplug from wall receptacle. Pry switch out with screwdriver while pushing on inner tab. Then disconnect electrical plug.
Was this helpful?
Thank you for voting!
INTERIOR DOOR ACTIVATED LIGHT SWITCH QUIT WORKING
1 person
found this instruction helpful.
-
JON from OJAI, CA
- Really Easy
- 15 - 30 mins
-
Screw drivers
1. Unplug the refrigerator (to avoid shock) 2. With one screwdriver pry open the switch on the side facing the door to a gap of about 1/8 inch 3. Insert a second screwdriver into the gap to press the plastic tab back slightly and this should release the part. 4. pull the part out and unplug it, you may have to pry back some small tabs o
... Read more
n the sides, 5. Plug in the new switch 6. plug in the refrigerator the light should come on, if not tighten the connection 7. Insert new switch back into its slot, it should snap in place. Done!
Read less
Was this helpful?
Thank you for voting!
Door stopper broke
2 of 4 people
found this instruction helpful.
-
James from STREATOR, IL
- Really Easy
- 15 - 30 mins
-
Screw drivers
Very simple, remove broken part with screwdriver and replace with new.
Other Parts Used:
Was this helpful?
Thank you for voting!
The right hand glide for the top freezer drawer was broken.
1 person
found this instruction helpful.
-
Cathrine from NEW ORLEANS, LA
- Very Easy
- 15 - 30 mins
Replaced the glide.
Was this helpful?
Thank you for voting!
Door light switch, 3rd one I have replaced in 6 years made in China.
1 person
found this instruction helpful.
-
Charles from CURWENSVILLE, PA
- Really Easy
- Less than 15 mins
-
Pliers, Screw drivers
Easy install, small screwdriver under back of old switch push out and pull out with small pliers. unsnap the old plug and install new. YOUR DONE
Was this helpful?
Thank you for voting!
Replace switch
1 person
found this instruction helpful.
-
Dean from HILLSDALE, MI
- Really Easy
- Less than 15 mins
-
Screw drivers
Read previous tips
Taped off area around switch to protect surface
Used putty knife to extract switch
Used screwdriver to separate connector from switch
Plugged in connector
Pushed switch assembly into opening
Removed tape
Taped off area around switch to protect surface
Used putty knife to extract switch
Used screwdriver to separate connector from switch
Plugged in connector
Pushed switch assembly into opening
Removed tape
Was this helpful?
Thank you for voting!