The interior light in your refrigerator is controlled by a switch that is activated when the door is opened and closed. If your refrigerator light will not turn on, or stays on when the door is closed, you could have a faulty switch. The switch is spring-loaded and is a generally closed type of switch meaning there should be no continuity...Read more when the button is pushed, and continuity through the switch when it is no longer engaged. This plastic, white, OEM switch is sourced directly from the manufacturer, is sold individually and is easy to replace. The repair usually takes less than 15 minutes and requires a flat-blade screwdriver and needle-nose pliers.
This door shelf bin, also known as a door basket, is made to store things, like bottles and jars, in your fridge. It is a clear shelf that fits across your fridge door, easily hooking into place. It measures around 27 inches in length and 5 inches in both width and height. Please note that this genuine OEM replacement part is sold individually. Check how many you will need before making your purchase.
This is a shelf assembly for various models of LG refrigerators. This assembly features the glass pane and outer plastic frame together as one. If the plastic or glass portion of your refrigerator shelf have cracked or are damaged, they will need to be replaced immediately to ensure food items are supported properly. This shelf measures a...Read morepproximately 29 inches wide and 19.5 inches deep, and can be replaced by simply sliding out the old one and sliding in the new one.
This door stopper helps limit door movement to prevent overextension. Designed for durability and precise positioning, it supports controlled operation and long-term reliability.
This ice maker assembly is designed for select LG refrigerators and includes both the ice mold and control device to ensure consistent and efficient ice production. If your refrigerator is no longer producing ice, this complete unit may be the solution. Before beginning installation, disconnect the appliance from all utilities and follow ...Read moresafety precautions. Please verify compatibility with your model, as part dimensions may vary slightly.
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Remove and replace light switch
45 of 90 peoplefound this instruction helpful.
Debbie from Waltham, MA
A Bit Difficult
30 - 60 mins
Pliers, Screw drivers
Video makes it look easy. Kenmore refrigerator does not have "groove" along the right hand side of switch that allows for pushing down on release. Used a thin screwdriver to get under to push while holding switch edge with pliers. Kept slipping. Tape sides to avoid scratching inside of refrigerator.
Was this helpful?
Thank you for voting!
Replacing the middle door shelf on the refrigerator door
6 of 10 peoplefound this instruction helpful.
RUSTY from Phoenix, AZ
Really Easy
30 - 60 mins
Extremely easy. Open the refrigerator door, remove all food items from the damaged door shelf and set them aside. Remove the divider by prying the back curved grip from the back wall of the shelf. Bump the bottom of the shelf with your hand in an upward motion until the shelf is dislodged from its mounting points. Remove the damaged d
... Read moreoor shelf and install the replacement shell by aligning the door mounting points with the groves built into the door shelf and press downward until the shelf is locked into place. Replace the divider and all the food items removed. Shut the door and you're done
Read less
Was this helpful?
Thank you for voting!
Refrigerator light would not reliably turn on when the door was opened.
4 of 4 peoplefound this instruction helpful.
William from TUCSON, AZ
Really Easy
Less than 15 mins
Pliers
Switched the refrigerator circuit breaker to off. Put tape around the switch to prevent scratches. Wedged the putty knife into the right side of the switch and pried up.the switch and connector popped out. Removed the connector from the old switch and connected it to the socket in the new switch. Stuffed the new switch and connector back
... Read moreinto its home. Switched on the circuit breaker. Now we have light in the refrigerator with every opening!