7800687 ((ECLP21602KWV)(Series 2)) Snapper Lawn Mower - Overview

It is a genuine item that is supplied by the original equipment manufacturer for use in walk-behind mowers made by Murray, Briggs & Stratton, Snapper, and Simplicity. The self tapping screw attaches to the front wheel drive rear baffle. A flat head screwdriver will be necessary during the installation of this part. Over time this part may...Read more become stripped and will need to be replaced. Keep in mind this part is made of metal and is sold individually.

This replacement bolt is an authentic OEM replacement part generally used on Snappers snow blowers/throwers. Its purpose is to secure scraper blade to the housing. It is a standard flat-head bolt which is sold individually. Please note this bolt has a square designed under its head which allows it to stay in place while the lock nut is being secured.

This is a genuine manufacturer-approved part which is made for use with Murray and Snapper riding lawn mowers and garden tractors. It is one of the special bushings that are utilized on the equipment. This part acts as a lining for components helping to provide a tight fit. Make sure to check the appropriate diagrams of your model for the...Read more correct application of this hardware. It is made of durable material and is sold individually. You may need a screwdriver and pliers to replace it.

This quarter-inch Nylock nut, or hex nut, is silver in color and sold individually. Made of metal, its simple task is to secure and lock parts in place on a variety of different equipment. Regardless of the specific function, this nut may become damaged over time and if you notice the part it is securing becoming loose, it is time to chan...Read morege the Nylock Nut. Use a wrench to make this repair, ensuring your torque to the manufacturer specs. Most of our customers found this to be an easy repair, but difficulty can vary depending on the part you are accessing to make the repair.

This 5/16 washer, or toothed washer, is sold individually. It provides a tight fit between the knob and the upper handle on a range of outdoor power equipment. It attaches between the wing knob and the upper handle, and over time and through use, can become damaged and need replacing. It is gold in color and metal, and repairing it is an easy task according to our customers.

This danger decal in your lawn equipment is a warning sticker that reminds users to keep their hands and feet away from certain parts of your machine. Measuring approximately 4 inches in both length and width, it has the message DANGER, KEEP HANDS and FEET AWAY written on it in English. Typically, this decal is placed near the dangerous p...Read morearts of your machine, such as its blades, discharge chute, nozzle, impeller, or dashboard. If the danger decal becomes worn, torn, or difficult to read, you must replace it as soon as possible to prevent accidents from occurring. You must place it in a visible location where the person operating your machine can see it and it needs to be near the part that it is warning them about. This OEM-certified sticker is sold individually.

This is an authentic replacement part manufactured for use with Snapper walk-behind lawnmowers. Lawnmower wheels can wear out from normal use and will eventually need to be replaced. This wheel is the driving wheel that is geared and connects to the transmission axle. The rear wheel assembly is sold as an individual replacement part.

Clip zone control

This is a genuine Murray and Snapper replacement part for use in lawn mowers and lawn tractors. The cap screw attaches to the idler pulley. A wrench may be needed during the replacement of this part. It is made out of metal and will need to be replaced if it strips or breaks. This item is sold individually.

This is an original replacement bolt commonly used on lawn and garden equipment. It is supplied from manufacturer for use with lawn mowers and snow blowers/throwers. The purpose of this bolt is to secure the upper handle to the unit. It is designed with a square are under bolts head which helps it to stay put while the lock knob is being secured. Includes one (1) bolt per order.

This is a genuine Snapper replacement part. The grip is designed by the manufacturer for use in lawn tractors. This part is made of flexible rubber, and is placed on the clutch handle to provide the user with a secure and comfortable grip. No tools are required when replacing this item. Simply remove the old part and slide the new one into place. This part is sold individually.

This is a genuine replacement part sourced from the original manufacturer for use with walk-behind lawnmowers. The special double cable clamp is commonly used to secure the cables to the handle assembly. This double cable clamp is available as an individual replacement part, please see model diagram for associative parts.