7800322 (BTD2250FC) Murray Lawn Mower - Overview

This 5/16-18 wing knob is sold individually. It is a plastic part, black in color, that works on a variety of equipment. Its general function is to allow you to quickly loosen, remove, or fold down things such as handles. If it no longer loosens or tightens, it may be broken or damaged due to fatigue and wear. Replacing this part is an easy repair that does not require any tools.

This hex nut is a fastener made from steel and is used to secure the end of a bolt in various lawn and garden equipment and machinery. It is a genuine OEM replacement part that comes in a standard size of 5/16 of an inch with 18 threads per inch. The hex nut has a hexagonal shape, which gives it greater grip and makes it easy to tighten u...Read moresing a wrench or a set of pliers. The nut also has a flange on one end, which locks the nut in place, prevents damage to the area where it is installed, and allows the load to be evenly distributed. It is important to replace your hex nut if it is loose, cracked, or corroded. If you have not yet removed the old hex nut from your equipment you will need a socket wrench to remove it. After that, you can easily install the new nut by threading it onto a bolt or screw and then tightening it with a wrench or pliers until it is tightly secured.

This genuine OEM lawn mower blade is designed to deliver clean, precise cutting performance for walk-behind mowers. Measuring approximately 22 inches in length (21-5/8 inches cutting length), it is made from durable steel for reliable strength and long-lasting use. Ideal for replacing a worn, bent, or damaged blade, it helps restore even cutting and maintain your mower’s performance.

This quarter-inch Nylock nut, or hex nut, is silver in color and sold individually. Made of metal, its simple task is to secure and lock parts in place on a variety of different equipment. Regardless of the specific function, this nut may become damaged over time and if you notice the part it is securing becoming loose, it is time to chan...Read morege the Nylock Nut. Use a wrench to make this repair, ensuring your torque to the manufacturer specs. Most of our customers found this to be an easy repair, but difficulty can vary depending on the part you are accessing to make the repair.

This 5/16 washer, or toothed washer, is sold individually. It provides a tight fit between the knob and the upper handle on a range of outdoor power equipment. It attaches between the wing knob and the upper handle, and over time and through use, can become damaged and need replacing. It is gold in color and metal, and repairing it is an easy task according to our customers.

This bolt is a genuine OEM replacement part used in a variety of lawn and garden equipment. It is 2 inches long with a head diameter of 5/16 inches, and a thread pitch of 16 threads per inch. The bolt is used to secure the upper and lower handles on your equipment. If the bolt is stripped or damaged, your handles will become loose and fal...Read morel out of alignment. You may also notice increased shaking when using your equipment. Replace the bolt promptly as the handles can eventually collapse. Each bolt sold individually.

It is a genuine OEM sourced replacement screw which is specially designed for use with Briggs and Stratton engines commonly installed on lawn and garden equipment. This special hardware has multiple applications depending on the model of your unit, please make sure to check appropriate diagrams of your unit for the correct location and us...Read moree of this item. This screw is made of high-quality metal and it is sold individually.

Keep in mind this part is made of metal and is sold individually. The washer goes next to the extension spring. It may require a wrench during installation. Over time this part may break and will need to be replaced. This authentic item is supplied directly from the original equipment manufacturer for use with lawn tractors and lawn mowers made by Murray, Briggs & Stratton, Snapper, and Simplicity.

This is an authentic Murray replacement part that is sourced from the original manufacturer to be used with walk-behind lawnmowers. The metal plate connects to the mower's deck to block the side discharge port when using the mower to mulch. This item is available as an individual replacement part.

An authentic manufacturer sourced part which is supplied for use with Briggs and Stratton, Murray, and Snapper lawn and garden equipment. This replacement nut has a few different applications, please make sure to check the appropriate parts lists and diagrams of your model for the exact location of this hardware. Note, this durable metal nut is sold individually. You will need a wrench to secure or remove it.

This is a genuine OEM sourced item that is supplied for use with lawn and garden equipment. It is an identical replacement for a missing or a damaged nut that was installed on a new unit, please make sure to refer to the appropriate diagrams of your model for the correct location and application of this hardware. Keep in mind this high-quality part is made of durable metal and is sold individually.