Models > 7479957910

7479957910 Kenmore Microwave - Overview

Sections of the 7479957910

[Viewing 2 of 2]
Keep searches simple, eg. "belt" or "pump".
Screw, 8/18 x 3/8 – Part Number: WP90767
Screw, 8/18 x 3/8
★★★★★
★★★★★
(2)
PartSelect #: PS11746840
Manufacturer #: WP90767
This screw is sold individually.
$5.42
  In Stock
Order within the next 11 hrs and your part ships today!
Ceramic Fuse - 20 amp – Part Number: WPM0805101
Ceramic Fuse - 20 amp
★★★★★
★★★★★
(3)
PartSelect #: PS11747931
Manufacturer #: WPM0805101
This microwave fuse is just over an inch in length. It has a white ceramic center, and metal on either end. This is a twenty amp 250-volt fuse, and is used to power your microwave. If your microwave w...
$10.19
  In Stock
Order within the next 11 hrs and your part ships today!
Heat Resistant Adhesive – Part Number: W10841140
Heat Resistant Adhesive
★★★★★
★★★★★
(1)
PartSelect #: PS11728058
Manufacturer #: W10841140
This is a heat-resistant adhesive for your appliance. The heat resistance allows you to stick parts such as grate feet, gaskets, and felt seals in hot areas, such as a cooktop, without compromising th...
$23.85
  In Stock
Order within the next 11 hrs and your part ships today!
Screw 8-18 x 1 – Part Number: WP489474
Screw 8-18 x 1
★★★★★
★★★★★
(1)
PartSelect #: PS11742753
Manufacturer #: WP489474
Sold individually.
$11.00
  On Order
Mounting Nut – Part Number: WP422617
Mounting Nut
PartSelect #: PS11742352
Manufacturer #: WP422617
Sold individually.
  No Longer Available
Capacitor – Part Number: 59001160
Capacitor
PartSelect #: PS2055682
Manufacturer #: 59001160
  No Longer Available
STIRRER MOTOR INCLUDES R.F. GASKET – Part Number: M12D21
STIRRER MOTOR INCLUDES R.F. GASKET
PartSelect #: PS180327
Manufacturer #: M12D21
  No Longer Available
TRANSMOTOR BLOWER/TRANSFORMER – Part Number: M12D49
TRANSMOTOR BLOWER/TRANSFORMER
PartSelect #: PS180351
Manufacturer #: M12D49
  No Longer Available
SWITCH-PROBE JACK – Part Number: M14D133
SWITCH-PROBE JACK
PartSelect #: PS180484
Manufacturer #: M14D133
  No Longer Available
DISCONTINUED – Part Number: M16D90
DISCONTINUED
PartSelect #: PS180814
Manufacturer #: M16D90
  No Longer Available
SCREW, #8 X 3/8 – Part Number: M1D107
SCREW, #8 X 3/8
PartSelect #: PS180852
Manufacturer #: M1D107
  No Longer Available
USE MAC A4539605 – Part Number: M1D227
USE MAC A4539605
PartSelect #: PS180946
Manufacturer #: M1D227
  No Longer Available

Questions And Answers for 7479957910

Be the first to ask our experts a question about this model!

Common Symptoms of the 7479957910

[Viewing 2 of 2]
Leaking
Fixed by
these parts
Fixing
Show All
Won’t turn on
Fixed by
these parts
Fixing
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
microwave oven blew fuse
First I removed upper front grill by removing two Philips head screws on top and pulling off. This exposed the Philips head screw which holds control panel in place. After removing screw I pushed up on panel and it came off to expose fuse. With needle nose pliers I removed old fuse and again with pliers held new fuse in position. With the help of a bladed screwdriver, I pushed new fuse into holder, then replaced panel, screw and grill. This took less than 15 minutes even as one of the wires on control panel pulled out of connection and took some time to locate where to reconnect, otherwise was an easy fix
.
Parts Used:
Ceramic Fuse - 20 amp
  • tad from tamarack, MN
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Pliers, Screw drivers
24 of 37 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
microve stopped working
Jenn-Air Microwave would not turn on. Clock worked , light worked, timer worked and would count down .I changed' Part #0813140 Switch, Micr} cost $8.99 plus shippingNow it works Thank You for good advise
Parts Used:
Ceramic Fuse - 20 amp
  • Denice from Montgomery, AL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
13 of 23 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Died while heating lasagna
Removed 4 small star head screws from back of microwave, lifted body off, removed blown fuse and replaced with new one (found where cord enters). This model is stainless inside and out and I like it a lot. It is also sold by Daewoo and a few other manufacturers.
Parts Used:
Ceramic Fuse - 20 amp
  • connie from madison, NC
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
9 of 15 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!