My Orders
74145 - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Error Code dH F
13 of 26 people
found this instruction helpful.
-
Garthlette from COVINGTON, GA
- A Bit Difficult
- 30 - 60 mins
-
Screw drivers
The refrigerator had the above code and when I check on YouTube, it explained that the defrosting was not working properly. It was taking more than 80 minutes to defrost. I ordered the Temperature Sensor first and it was not the issue. I also ordered the Defrost Temperature fuse or the Thermistor. I had to defrost the refrigerator first
... Read more
by using a portable heater to get it done quickly. (See Youtube on how to get to the Defrosting Unit inside the freezer). The Thermistor was the wrong part. I called the Partselect and explained that the part with the heating element is one piece. (Heating Coil Thermistor or Heating Coil). By replacing that piece solved the Error Code issue. I listened to Youtube for the instructions on how to replace the Heater Coil. So if you see the Error Code dH F, you need to replace the Heating Coil, which comes in
one piece and sits on the bottom of the Defrost Element.
one piece and sits on the bottom of the Defrost Element.
Read less
Was this helpful?
Thank you for voting!
Someone broke one of our Internal door shelves.
4 of 4 people
found this instruction helpful.
-
Jane from Truro, MA
- Very Easy
- Less than 15 mins
Purchased and replaced the broken internal side door shelf with a new one. Perfect fit!
Was this helpful?
Thank you for voting!
Grandson lost the ignition key to my Toro!
15 of 38 people
found this instruction helpful.
-
Michelle from AYLETT, VA
- Really Easy
- Less than 15 mins
No repair, lol! Just a perfect fit for my ignition :). I bought two in case my grandson gets curious again.
Was this helpful?
Thank you for voting!
Door Stopper had snapped off
1 person
found this instruction helpful.
-
Lawrence from FALL RIVER, MA
- Very Easy
- Less than 15 mins
-
Screw drivers
Unscrewed what remained from broken door stop, aligned new one, screwed it in. Done!
Was this helpful?
Thank you for voting!
Ice bucket broken
1 person
found this instruction helpful.
-
EDWARD from ASSONET, MA
- Really Easy
- Less than 15 mins
Replaced with new bucket
Was this helpful?
Thank you for voting!
Ice chute would not open.
18 of 54 people
found this instruction helpful.
-
Steve from MUKWONAGO, WI
- Easy
- 30 - 60 mins
-
Screw drivers
Removed ice dispenser and display with small screwdriver from front of the fridge. Pried out the whole piece slowly. This exposed the motor that activates the chute. Plugged in the new motor before any removal to verify the motor was the problem. When it worked, removed old and installed new. 3 screws. Piece of cake.
Was this helpful?
Thank you for voting!
Cold water control rusty and leaking water
2 of 6 people
found this instruction helpful.
-
Homer from MARION, VA
- Really Easy
- 30 - 60 mins
-
Screw drivers, Wrench (Adjustable)
Removed old part very easily and installed the new part without any problems. Used and adjustable wrench and screwdriver
Was this helpful?
Thank you for voting!
Spring was broken on original unit, had to replace whole lever.
0 of 1 people
found this instruction helpful.
-
Alan from Sun City West, AZ
- Really Easy
- Less than 15 mins
-
Screw drivers
removed old lever ( 2 screws ) took apart electrical connection, replaced lever, connected electrical hookup, put in screws. DONE !!!!!!
Was this helpful?
Thank you for voting!