74142 (ASWCSE0) LG Refrigerator - Parts

This front plate assembly, also known as a mullion or flipper, is a genuine replacement part designed for select LG and Kenmore French-door refrigerators. It serves a critical function by sealing the gap between the doors, preventing cold air from escaping and helping maintain consistent internal temperatures. Constructed from durable pla...Read morestic, it supports both the performance and appearance of the appliance. A failing mullion may result in poor sealing, visible gaps, increased energy consumption, and potential food spoilage. Replacing this component can restore proper door alignment and improve overall efficiency. Compatibility should be confirmed using your refrigerator’s model number prior to installation.

The door stop, or door stopper, is used in refrigerators. This door stop helps keep the door in position and in balance. This part is attached to the bottom of the door and it keeps it from opening and hitting the side of the refrigerator cabinet. If you find your door hits and scratches your lower cabinet when you open your fridge door, ...Read moreinstalling this part can be a solution to this problem. Make sure to unplug your appliance from the power source before installing this part and safely store food to prevent it from deteriorating. Refer to the diagram provided by the manufacturer for further instruction.

Refrigerator Air Filters are a key component for neutralizing odors and ensuring a fresh stream of air into your refrigerator. Swapping your old filter out for a fresh one isn’t difficult and should take less than five minutes. This OEM filter measures approximately 3 inches (length) x 3 inches (height) x 5 inches (Depth). Air filters should be changed every 6 months depending on usage.

This is a door basket for models of LG refrigerators. Refrigerator door baskets are used to hold and store food items in your refrigerator door. If your current door baskets are cracked, chipped, or damaged in any way and unable to fully support food items, they need to be replaced immediately. This door basket is made of clear plastic an...Read mored measures approximately 13 inches wide, 8 inches deep, and 3 inches tall. This basket features hooks on its rear side, for easy installation and removal from the fridge door. Some models use multiple of this basket in the fridge door, and this door basket is an OEM part that is sold individually, so consider that before ordering.

The water reservoir holds the water for the water dispenser as the water chills.

This roller assembly supports smooth movement of drawers or internal components, reducing friction and strain. Quiet, easy motion improves usability and helps prevent wear. Replacing a worn roller restores smooth, reliable operation.

This is a temperature sensor for various models of LG refrigerators. Temperature sensors are used to adjust the level of cooling depending on the internal temperature of the refrigerator. If your refrigerator is warm or not cooling consistently, ensure your evaporator fan is not blocked, before replacing this sensor. To replace this senso...Read morer, you will need a screwdriver and a set of pliers, and simply need to unplug the old sensor, and plug in the new one. This temperature sensor is a genuine OEM part that is sold individually and does not come with any other parts or accessories.

This is a 12V evaporator fan motor assembly designed for use within LG refrigerators. The evaporator fan is used to pull and remove any warm air from the fridge interior over the evaporator coils to cool it. If you notice the evaporator fan in your refrigerator is not running frequently or does not run at all, and your fridge is warmer as...Read more a result, this motor needs to be replaced. This evaporator fan motor is a genuine OEM part that does not come with the necessary fan blade, and simply installs with its single wire harness.