734002 Ariens Lawn Tractor - Overview

This authentic part is supplied by the original manufacturer for use with Ariens lawn and garden equipment. The flange bushing helps to provide a tight seal between connected parts while allowing for movement with minimum friction. Over time it may wear out, get damaged or lost eventually requiring a replacement. This high-quality flange ...Read morebushing is made of durable material and is sold individually. A screwdriver, pliers and a wrench set might be needed to perform this repair. Make sure to refer to the appropriate diagrams for your model to ensure the proper replacement procedure.

This L-3 synthetic severe-duty gear lube is specially produced for use on Ariens snow blowers. It is used to lubricate gearbox gears that help to drive the unit. This is an authentic OEM sourced item that is sold individually.

This is a genuine Ariens replacement part that has been sourced from the original manufacturer to be used with snowthrowers. The metal bushing fits into the bearing support to provide spacing between the rake shaft and the support. The bushing is sold as an individual replacement part.

This is an original Ariens replacement part manufactured for use with snowthrowers. The special feather key is used to protrude from a slot on a shaft and fit into a keyway on a gear or part assembly that fits over the shaft. The feather key joins the shaft and gear to allow unison rotation. This feather key is sold individually, please see model diagram for associative parts.

This Bearing Cone, or Cone Bearing, is used to support the helicon pinion shaft to allow it to rotate where it passes through an assembly. It is sourced directly from the manufacturer for use in snow blowers, is made of metal, is silver, is not part of a kit or assembly, and is sold individually. A grinding, growling, or squealing sound ...Read morefrom your bearing suggests that your bearing cone will need to be replaced. If you find signs of wear, fatigue, or damage on the Cone, it needs to be replaced. You will need a wrench set, a socket set, a screwdriver, and a nut driver to complete this repair. When you install the new Cone, ensure that you pack the bearing with grease before installing it. Customers rate this repair as Medium difficulty.

This genuine OEM lock nut is designed for use with Ariens snow blowers and throwers. It helps secure the skid shoe runner to the deck and is engineered to resist loosening when properly threaded onto a bolt, ensuring a stable and reliable connection. Made from durable metal, this high-quality part is sold individually. For safe installation, be sure to use a properly sized wrench.

This Bearing Cup is a genuine replacement part for various models of snow blowers. It is used to carry the maximum combinations of radial and thrust loads simultaneously. It is made of metal, is silver, is not part of a kit or assembly, and is sold individually. This part may make a grinding noise when it is malfunctioning. It should be...Read more replaced when it is visibly worn or damaged. It is found on the helicon shaft with the Cone Bearing and Adjustment Plug. You will need a screwdriver, pliers, a socket set, and a wrench set to complete this repair. Customers rate this repair as Medium difficulty.

This authentic item is sourced directly from the original equipment manufacturer for use with Ariens riding lawn mowers and garden tractors. It is an identical replacement for a missing or a faulty roller that was installed on a new unit. The part helps to support the deck, please make sure to refer to the appropriate diagrams of your mod...Read moreel for the correct location and application of this component. This high-quality part is made of durable rubber and is sold individually. Keep in mind the #02747651 Roller Clevis , the #02747500 Pin, Clevis and the #05503600 Flange Bushing are all sold separately.

This replacement bolt is sourced from original equipment manufacturer for use with Ariens snow blowers/throwers. It is a standard hardware which has multiple applications based on your unit. This bolt is designed with a square area under its head which allows the bolt to stay secure while the lock nut is tightened. It is sold individually.

This OEM part is a zerk fitting that is sometimes called a grease fitting, lube fitting, grease zerk, or Alemite fitting. It is a metal nipple that you connect a grease gun to, allowing you to lubricate the moving parts in your lawn equipment, usually on joints or bearings. This fitting is 1/4 inch wide, has 28 threads per inch, and a thr...Read moreeaded portion that is .256 inches long. If the fitting is broken, you may notice that your machine is moving sluggishly, or the fitting may appear cracked or clogged with debris. It is important to replace a damaged fitting right away, because if you do not, debris can prevent the fitting from accepting grease and the moving parts of your machine will wear out faster and eventually break down completely. To replace the fitting, you will need to use a wrench to remove it from your machine. Keep in mind that this replacement part is sold separately, so you may want to consider stocking up on fittings before you need them. Since the fittings on your machine wear out at the same rate, having a few extra on hand can save you time and hassle down the road.

This authentic replacement radial bearing is designed for use with Ariens lawn and garden equipment. Bearings are used to reduce the friction between connected rotating parts, the rollers help to distribute the weight evenly while the minimal contact area of the ball reduces friction. Because these components experience constant wear from...Read more heat and pressure eventually they will need to be replaced to ensure peak performance. Please note this high-quality part is made of durable metal and it is sold individually.